OpenMV Cam H7

33 pc(s)
CAM-02840

$109.95

More than just a camera board, OpenMV Cam is a complete vision solution that runs MicroPython which allows you to program it in Python to execute machine vision algorithms while being able to control I/O pins and read/write files on an SD card. This OpenMV Cam H7 is the next...
+

More than just a camera board, OpenMV Cam is a complete vision solution that runs MicroPython which allows you to program it in Python to execute machine vision algorithms while being able to control I/O pins and read/write files on an SD card.

This OpenMV Cam H7 is the next generation OpenMV Cam. It features a STM32H743VI ARM Cortex H7 processor running at 400 MHz with 1 MB of RAM and 2 MB of flash. All I/O pins output 3.3V and are 5V tolerant. The processor has the following I/O interfaces:

  • A full speed USB (12Mbs) interface to your computer. Your OpenMV Cam will appear as a Virtual COM Port and a USB Flash Drive when plugged in.
  • A μSD Card socket capable of 100Mbs reads/writes which allows your OpenMV Cam to record video and easy pull machine vision assets off of the μSD card.
  • A SPI bus that can run up to 100 Mbs allowing you to easily stream image data off the system to either the LCD Shield, the WiFi Shield, or another microcontroller.
  • An I2C Bus, CAN Bus, and an Asynchronous Serial Bus (TX/RX) for interfacing with other microcontrollers and sensors.
  • A 12-bit ADC and a 12-bit DAC.
  • Three I/O pins for servo control.
  • Interrupts and PWM on all I/O pins (there are 10 I/O pins on the board).
  • One RGB LED and two high power 850nm IR LEDs.


The OV7725 image sensor is capable of taking 640x480 8-bit Grayscale images or 640x480 16-bit RGB565 images at 60 FPS when the resolution is above 320x240 and 120 FPS when it is below. Most simple algorithms will run at above 60 FPS. Your OpenMV Cam comes with a 2.8mm lens on a standard M12 lens mount. If you want to use more specialized lenses with your OpenMV Cam you can easily buy and attach them yourself.

The OpenMV Cam H7 currently supports following applications:

  • Frame Differencing
    • You can use Frame Differencing on your OpenMV Cam to detect motion in a scene by looking at what's changed. Frame Differencing allows you to use your OpenMV Cam for security applications. Checkout the video of the feature here.
  • Color Tracking
    • You can use your OpenMV Cam to detect up to 16 colors at a time in an image (realistically you'd never want to find more than 4) and each color can have any number of distinct blobs. Your OpenMV Cam will then tell you the position, size, centroid, and orientation of each blob. Using color tracking your OpenMV Cam can be programmed to do things like tracking the sun, line following, target tracking, and much, much, more. Video demo here.
  • Marker Tracking
    • You can use your OpenMV Cam to detect groups of colors instead of independent colors. This allows you to create color makers (2 or more color tags) which can be put on objects allowing your OpenMV Cam to understand what the tagged objects are. Video demo here.
  • Face Detection
    • You can detect Faces with your OpenMV Cam (or any generic object). Your OpenMV Cam can process Haar Cascades to do generic object detection and comes with a built-in Frontal Face Cascade and Eye Haar Cascade to detect faces and eyes.
  • Eye Tracking
    • You can use Eye Tracking with your OpenMV Cam to detect someone's gaze. You can then, for example, use that to control a robot. Eye Tracking detects where the pupil is looking versus detecting if there's an eye in the image.
  • Optical Flow
    • You can use Optical Flow to detect translation of what your OpenMV Cam is looking at. For example, you can use Optical Flow on a quad-copter to determine how stable it is in the air. See the video of the feature here.
  • QR Code Detection/Decoding
    • You can use the OpenMV Cam to read QR Codes in it's field of view. With QR Code Detection/Decoding you can make smart robots which can read labels in the environment. You can see our video on this feature here.
  • Data Matrix Detection/Decoding
    • The OpenMV Cam H7 can also detect and decode data matrix 2D barcodes too. You can see our video on this feature here.
  • Linear Barcode Decoding
    • The OpenMV Cam H7 can also decode 1D linear bar codes. In particular, it can decode EAN2, EAN5, EAN8, UPCE, ISBN10, UPCA, EAN13, ISBN13, I25, DATABAR, DARABAR_EXP, CODABAR, CODE39, CODE93, and CODE128 barcodes. You can see our video on this feature here.
  • AprilTag Tracking
    • Even better than QR Codes above, the OpenMV Cam H7 can also track AprilTags at 160x120 at up to about 12 FPS. AprilTags are rotation, scale, shear, and lighting invariant state-of-the-art fidicual markers. We have a video on this feature here.
  • Line Detection
    • Infinite line detection can be done speedily on your OpenMV Cam at near max FPS. And, you can also find non-infinite length line segments too. You can see our video of this feature here. Additionally, we support running linearregressionson the image for use in line following applications like this DIY Robocar.
  • Circle Detection
    • You can use the OpenMV Cam H7 to easily detect circles in the image. See for yourself in this video.
  • Rectangle Detection
    • The OpenMV Cam H7 can also detect rectangles using our AprilTag library's quad detector code. Checkout the video here.
  • Template Matching
    • You can use template matching with your OpenMV Cam to detect when a translated pre-saved image is in view. For example, template matching can be used to find fiducials on a PCB or read known digits on a display.
  • Image Capture
    • You can use the OpenMV Cam to capture up to 640x480 Grayscale/RGB565 BMP/JPG/PPM/PGM images. You directly control how images are captured in your Python script. Best of all, you can preform machine vision functions and/or draw on frames before saving them.
  • Video Recording
    • You can use the OpenMV Cam to record up to 640x480 Grayscale/RGB565 MJPEG video or GIF images (or RAW video). You directly control how each frame of video is recorded in your Python script and have total control on how video recording starts and finishes. And, like capturing images, you can preform machine vision functions and/or draw on video frames before saving them.

Finally, all the above features can be mixed and matched in your own custom application along with I/O pin control to talk to the real world.

Specifications:

  • Processor :
    • ARM® 32-bit Cortex®-H7 CPU w/ Double Precision FPU
    • 400 MHz (856 DMIPS)
  • RAM Layout (1MB Total):
    • 256KB .DATA/.BSS/Heap/Stack
    • 512KB Frame Buffer/Stack
    • 256 KB DMA Buffers
  • Flash Layout (2MB Total):
    • 128KB Bootloader
    • 128KB Embedded Flash Drive
    • 1792KB Firmware
  • Supported Image Formats:
    • Grayscale
    • RGB565
    • JPEG (and BAYER)
  • Maximum Supported Resolutions:
    • Grayscale: 640x480 and under
    • RGB565: 320x240 and under
    • Grayscale JPEG: 640x480 and under
    • RGB565 JPEG: 640x480 and under
  • Lens Info:
    • Focal Length: 2.8mm
    • Aperture: F2.0
    • Format: 1/3"
    • HFOV = 70.8°, VFOV = 55.6°
    • Mount: M12*0.5
    • IR Cut Filter: 650nm (removable)
  • Electrical Info:
    • All pins are 5V tolerant with 3.3V output.
    • All pins can sink or source up to 25mA.
    • P6 is not 5V tolerant in ADC or DAC mode.
    • Up to 120mA may be sinked or sourced in total between all pins.
    • VIN may be between 3.6V and 5V.
    • Do not draw more than 250mA from your OpenMV Cam's 3.3V rail.
  • Power consumption:
    • Idle - No μSD Card: 90mA @ 3.3V
    • Idle - μSD Card: 90mA @ 3.3V
    • Active - No μSD Card: 140mA @ 3.3V
    • Active - μSD Card: 150mA @ 3.3V

Documents:

Dimensions: 45(L) x 36(W) x 30(H)mm, 16g

Good to know