USB Logic Analyzer - 24MHz/8-Channel (DA-01)

Is your I2C bus not ACK'ing the way you expect? Do you need to discover a UART's mysterious baud rate? Or do you want to reverse engineer an SPI protocol? These all sound like jobs for a logic analyzer!

With the growing ubiquity of UART, I2C, and SPI sensors, logic analyzers are becoming a tool everyone needs in their toolbox. While the features of this logic analyzer don't quite measure up against those high-end products, it's still a great tool for quickly diagnosing most communication issues we encounter.

This is an 8-channel logic analyzer with support for sampling rates of up to 24MHz. It will work with both 3.3V and 5V systems (up to 5.25V max and 2.0V minimum on a high logic-level). The logic analyzer is powered via an included mini-B USB cable.

This logic analyzer works with sigrok – an open-source, cross-platform signal analysis software suite. Check out Sparkfun's sigrok PulseView tutorial for help getting started.

The analyzer ships with Female-To-Female jumper wires. If you're using an Uno or board with female headers we recommend picking up a handful of Male-To-Male Rainbow Wire to connect the analyzer to the female headers.

Kit includes:

• 24MHz/8-Channel USB Logic Analyzer
• 10-conductor female-to-male jumper wires
• Mini-B USB cable

Features:

• 8-channels
• Sampling rate up to 24MHz, configurable down to 20kHz
• 5.25V maximum voltage input
  • 2.0V minimum logic-high
  • 0.8V maximum logic-low
• Input impedance > 100kΩ, 5pF
• USB power supply
• Supports open-source sigrok logic analyzer software
• Cross-platform support: Windows, Mac OS X, Linux, Android, etc.

Documents:

• Using the 8Ch/24MHz Logic Analyzer with sigrok
• Sigrok - cross-platform, open-Source signal analysis software suite

Dimensions: 54.7 x 27.4 x 14.1 mm