Pycom SiPy 1.0 - WiFi + BLE + SigFox Radio

11 pc(s)
DEV-02547

$68.50

The SiPy from Pycom is a multi-network (Sigfox, WiFi and BLE) development platform. It's programmable with MicroPython and the Pymakr IDE for fast IoT application development, easy programming in-field and extra resilience with network failover. The best blend of speed to deployment and...
+

The SiPy from Pycom is a multi-network (Sigfox, WiFi and BLE) development platform. It's programmable with MicroPython and the Pymakr IDE for fast IoT application development, easy programming in-field and extra resilience with network failover. The best blend of speed to deployment and access to new LPWAN networks rolling out across Europe, USA, Africa and India. You can also configure the SiPy in FSK mode to send packets directly from SiPy to SiPy. This way you can create the network configuration of your choice and then use another SiPy as central Nano-Gateway to forward the data to the cloud via WiFi. Pycom's module is CE, FCC, IC and RCM certified!

This is the 22dBm version for Sigfox Zones RCZ2 (902MHz – US, Canada and Mexico) and RCZ4 (920-922MHz – Australia, New Zealand, Latin America and SE Asia). For Singapore user, it will set to 920-922MHz when you update the firmware.

Note:

  1. Using the Sigfox radio without this external antenna can lead to damage of the device and is therefore not recommended.
  2. Please note: Pycom modules are powered by the new and feature-packed Espressif ESP32 chip. As a result, the firmware is evolving constantly as the ESP32 IDF matures. Regular firmware updates are therefore provided.

Features:

  • Powerful CPU, BLE and state of the art WiFi radio
  • MicroPython enabled
  • Fits in a standard breadboard (with headers)
  • Ultra-low power usage: a fraction compared to other connected microcontrollers
  • Processing:
    • Espressif ESP32 chipset
    • Dual processor + WiFi radio system on chip
    • Network processor handles the WiFi connectivity and the IPv6 stack
    • Main processor is entirely free to run the user application
    • An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherls during deep-sleep mode while only consuming 25uA
  • Interfaces:
    • 2 x UART, 2 x sPI, I2C, I2S, micro SD card
    • Analog channels: 8×12 bit ADCs
    • Timers: 4×16 bit with PWM and input capture
    • DMA on all peripherals
    • GPIO: Up to 24
  • Hash/Encryption: SHA, MD5, DES, AES
  • WiFi: 802.11b/g/n 16mbps
  • Bluetooth: Low energy and classic
  • Sigfox Specifiction
    • TI CC1125NarrowbandTransceiver
    • Class 0 device. Maximum Tx power: +22dBm (Australia and New Zealand, Asia)
    • Node range: Up to 50km
    • Sigfox pre-cer ed (January 2017)
  • RTC: Running at 32KHz
  • Power:
    • Voltage input: 3.3V to 5.5V
    • 3V3 output capable of sourcing up to 400mA
    • WiFi: 12mA in ac ve mode, 5uA in standby
    • Sigfox (Austrailia, New Zealand and South America): 24mA in Rx mode, 257 mA in Tx mode and 0.5uA in standby
  • Security & Certifications
    • SSL/TLS support
    • WPA Enterprise security
    • FCC – 2AJMTWIPY2R
    • CE 0700
  • Memory
    • RAM: 512KB
    • External flash: 4MB
    • Hardware floating point acceleration
    • Python multi-threading

Documents:

Dimensions: 55mm x 20mm x 3.5mm (excluding headers)

Good to know