We are still operating during CB period, and will ship your order ASAP. If you're unable to reach us by phone, drop us an email.

7" Capacitive Touchscreen LCD - 1024x600 + Pre-configured 8GB microSD Card For RaspberryPi

Out-of-stock
DEV-02198

$115.00

This 7" high resolution LCD Display is designed to provide a quick and easy interface to Raspberry Pi 2 / Pi 3 and other mini PC such as BeagleBone Black, Banana Pi and PC running on Windows 7/8/10. It features a fully assembled 7" inches 1024x600 IPS high resolution LCD screen with...

This 7" high resolution LCD Display is designed to provide a quick and easy interface to Raspberry Pi 2 / Pi 3 and other mini PC such as BeagleBone Black, Banana Pi and PC running on Windows 7/8/10. It features a fully assembled 7" inches 1024x600 IPS high resolution LCD screen with capacitive touchscreen, HDMI adapter and USB port, engineered specifically to let you quickly attached the display module to the mini PC without any wiring hassles

The microB USB port on the display supports the capacitive touchscreen interface. You can also power the display over USB as long as your board can supply 500mA on the USB port. Because of the high power required by the LCD display, a 5V 2A power adapter is recommended to power both the board and display. Flaky behavior and crashes may result if low current power adpater is used.

Each LCD Display comes with a pre-configured 8GB microSD card for Raspberry Pi 3 (contact us for RPi2) so you can start using this display right out of the box. The CDROM contains user guide and pre-configured Image files for BeagleBone Black and Banana Pi.

The firmware supports HID protocol. The capacitive touch input will be recognised by the OS as standard HID device, therefore no installation of driver is required. Supported system: Raspberry Pi (Raspbian, Ubuntu), Windows 7/8/10, Windows10 IoT and OSX.

Kit includes:

  • 7" 1024x600 high resolution IPS LCD display with Capacitive Touchscreen
  • 1x HDMI cable
  • 1x microB USB cable
  • 1x Mounting standoff kit
  • 1x CDROM
  • 1x 8GB microSD card with pre-configured Raspbian OS

Documents:

Dimensions: 164.9 (L) x 124.3(W)mm

Good to know