Plastic Water Solenoid Valve - 12V - 1/2" Nominal

Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening project. There are two 1/2" (Nominal non-taped National Pipe) inlet / outlet. Normally, the valve is closed. When 12VDC is applied to the two terminals, the valve opens and water can push through. The valve has a gasket arrangement inside, so there is a minimum pressure requirement of 0.02 Mpa (3 PSI). Also, liquid can only flow one direction.

Features:

• 1/2" Nominal NPS
• Working Pressure: 0.02 Mpa - 0.8 Mpa
• Working Temperature: 0 ℃ - 60 ℃
• Actuating voltage: 12VDC (but we found it would work down to 7V)
• Current consumption: Approx. 500mA @ 12V
• Actuating life: ≥ 20 million cycles
• Normally Closed

Dimensions:

• Size: 71 x 56mm