Delivery fee

New items

1 2 3 4 5 6 7 8 9 10 11
5 - 13
Sort by Popularity
63 Per Page
Diffused Yellow LED - 10mm (5 pcs)
$1.00  
13 pc(s)
Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow. Pack of 5 diffused Yellow LEDs. Features : 620-625nm Red 1.8-2.2VDC Forward Voltage 20mA Forward Current 40 degree viewing angle 100-150...
− +
Single Channel Relay Module (5V)
$1.99  
Out-of-stock
This Single Relay Module can be used to control the lighting, electrical and other equipments through the digital IO port. Applications include solenoid valves, lamps, motors and other high current or high voltage devices. The modules are controlled with 5V signal and they are pre-soldered. A...
Out-of-stock
-6%
USB Type A Female Breakout
$6.50 $6.95  
1 pc(s)
This simple board breaks out a female USB type A connector's VCC, GND, D- and D+ pins to a 0.1" pitch header. If you want to add a USB to your project, but don't want to put up with soldering tiny connectors, this is the board for you. Dimensions : 1.02 x 0.9" (26.06 x 22.93mm)...
− +
Opto-Isolated Relay Module - 2 Channels (5V)
$3.99  
3 pc(s)
This two channels Relay Module can be used to control the lighting, electrical and other equipments through the digital IO port. The digital input circuit is optically isolated from the relay, so your controller is protected from voltage spikes and surges. The module is controlled with 5V...
− +
Copper Tape - 50mm (20 Meters)
$26.95  
5 pc(s)
Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder, like the stained glass on Tiffany lamps. This copper tape is...
− +
LED - RGB Clear Common Anode - 5mm
$0.95  
63 pc(s)
Ever hear of a thing called RGB? Red, Green, Blue? How about an RGB LED? These 5mm units have four pins: one for each color and a common anode. Use this one LED for three status indicators or pulse width modulate all three and get mixed colors! Note: The datasheet below is for the...
− +
Capacitor Ceramic 22pF
$0.20  
500 pc(s)
This is a very common 22pF capacitor. Used with crystals for loading purposes. 0.2" spaced leads make this a perfect candidate for breadboarding and perf boarding. Rated at 50V.
− +
5V Stepper Motor w/ULN2003 Driver
$4.90  
3 pc(s)
This small stepper is a great way to get things moving, especially when positioning and repeatability is a concern. The stepper motor has five color-coded wires allow it to be controlled by both unipolar and bipolar stepper motor drivers. All five wires are used when connect to a unipolar...
− +
PIR Motion Sensor (w/Adjustable delay and Sensitivity)
$4.20  
9 pc(s)
PIR sensors are used to detect motion from pets/humanoids from about 20 feet (~6 meters) away. This one has an adjustable delay before firing (approx 2-4 seconds) and adjustable sensitivity. You can easily reposition the sensor or mount it using the two holes on either side Runs on...
− +
MakerBeam Starter Kit - Black Anodised Threaded
$169.00  
Out-of-stock
MakerBeam is a Mini-T open-source building system. Mini-T is a miniature version of T-slot (a technology that is widely used for industrial automation, robotics and machine enclosures.) Not only is it small enough to work as a model building system, but it's also precise and strong enough to...
Out-of-stock
Heating Pad - 5x10cm
$7.90  
12 pc(s)
These DC powered heating pads are perfect for near-body heating applications. They get warm to the touch but not too hot. Simply apply 5VDC to the wire leads and within minutes, the pad will begin to warm up. These heating pads are constructed using a mesh of Polyester filament and Micro...
− +
-31%
Push Button 33mm - Green
$1.80 $2.60  
20 pc(s)
This is a 33mm round momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. Features : Convex Button 35.75 mm Diameter x 46 mm Height M28 thread Mounting Hole Diameter: 27.3 mm Net weight: 0.015kg Rated...
− +
-31%
Push Button 33mm - Yellow
$1.80 $2.60  
28 pc(s)
This is a 33mm round momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. Features : Convex Button 35.75 mm Diameter x 46 mm Height M28 thread Mounting Hole Diameter: 27.3 mm Net weight: 0.015kg...
− +
2 x AAA Battery Holder with Cover and Switch
$1.90  
14 pc(s)
Enclosed battery holder for two AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose the cells. It also features a switch that lets you open and close the electrical connection between the batteries and the holder's leads. The leads are about...
− +
-37%
Jumper Wire Kit
$2.50 $3.95  
1 pc(s)
This is a time saving kit of jumper wires - cut, stripped, and pre-bent for your prototyping pleasure. Included with this kit are 14 various lengths of 22AWG wire - 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100, and 125mm - 10 pieces of each.
− +
Adafruit NeoPixel 1/4 60 Ring - 5050 RGB LED w/ Integrated Drivers
$19.90  
2 pc(s)
The biggest NeoPixel Ring yet! With four of these you can make a huge ring with 60 ultra bright smart LED NeoPixels are arranged in a circle with a 6.2" diameter. Each order comes with just the quarter ring. Four of this item are required to make a large ring. You will have to solder them...
− +
-10%
9V Battery Holder with On/Off Switch
$1.80 $2.00  
6 pc(s)
Enclosed battery holder for 9V battery. This holder features a lid that slides over the batteries and snaps into place to fully enclose the battery. It also features a switch that lets you open and close the electrical connection between the batteries and the holder's leads. The leads are...
− +
Super Bright LED - Blue 10mm (5 pcs)
$0.95  
30 pc(s)
Huge 10mm through hole LEDs. The LEDs are so bright that it hurts to look directly at them. All lenses are clear. Pack of 5 LEDs. Features : 465-470nm Blue 3.0-3.4VDC Forward Voltage 80mA Forward Current 30 degree viewing angle 8,000-10,000 MCD output...
− +
-31%
Push Button 33mm - Pink
$1.80 $2.60  
26 pc(s)
This is a 33mm round momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. Features : Convex Button 35.75 mm Diameter x 46 mm Height M28 thread Mounting Hole Diameter: 27.3 mm Net weight: 0.015kg Rated...
− +
Mono 2.5W Class D Audio Amplifier - PAM8302
$8.50  
1 pc(s)
This super small mono amplifier is surprisingly powerful - able to deliver up to 2.5 Watts into 4-8 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.0V-5.5VDC. Since the amp is a class D, its very efficient (over 90% efficient when driving an 8Ω...
− +
-42%
AutoDriver - Stepper Motor Driver
$29.50 $51.00  
1 pc(s)
This AutoDriver makes it easy to put the L6470 Stepper Driver (a.k.a "dSPIN") to work in your project. Simply connect your motors and your SPI-capable microcontroller and get steppin'! STMicro's L6470 is a 3A, 8-45V bipolar stepper motor driver. It has built-in overcurrent...
− +
-33%
Rocker Switch - DPDT
$0.60 $0.90  
34 pc(s)
This switch is about the same size as our right angle rocker switch except that it's double-pole double-throw. It's rated for 10 Amps at 125VAC and can be snap-in panel mounted. Documents : Dimensional Drawings
− +
-20%
Vibration Motor - 10x3.15mm
$2.00 $2.50  
46 pc(s)
This itty-bitty, shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. All moving parts are protected within the housing. With a 2.6-3.6V operating range, these units shake crazily at 3V. Once...
− +
Mini Real Time Clock Module (DS3231) for Raspberry Pi
$11.95  
5 pc(s)
Unlike most computers, the Pi lacks a Real-Time Clock (RTC). This means the Pi doesn't know what time it is when powered on. While your Pi is connected to a network it will be able to set it's clock correctly using NTP ( Network Time Protocol ) server. Without a network connection your Pi...
− +
Humidity and Temperature Sensor - DHT11
$4.95  
1 pc(s)
The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires...
− +
L298 Dual Motor Driver Module 2A
$5.50  
3 pc(s)
This dual motor driver is based on the L298N heavy-duty dual H-bridge controller, which can be used to drive two DC motors at up to 2A each, with a voltage between 5 and 35V DC - or one stepper motor or 2 solenoids with ease. The driver has a nice heatsink to keep the L298N cool and all...
− +
ESP32 Development Board
$19.95  
2 pc(s)
The ESP32 Development Board is a low-footprint, minimal system development board powered by ESP-WROOM-32 module. The ESP-WROOM-32 is a powerful and compact module that combines Wi-Fi and Bluetooth to support a wide range of applications that require wireless and internet connectivity. This...
− +
MakerBeam Corner Cube Kit - Clear
$24.75  
23 pc(s)
The corner cubes are designed especially for makerbeams with threaded beam ends. The bag contains: 12x Aluminum corner cubes 50x Stainless steel countersunk bolts with flat head (M3 x 6) 1x Allen key Note : Not compatible with non-threaded MakerBeam.
− +
MakerBeam Straight Bracket (12 pcs)
$13.50  
4 pc(s)
The stainless steel straight bracket is a great addition to MakerBeam product range. We are sure you love it too since customers regularly asked for it! Includes 12x Stainless steel Straight Bracket
− +
-50%
Teensy SmartMatrix Shield Kit for RGB LED Panel
$12.45 $24.90  
12 pc(s)
The SmartMatrix Shield is the best way to connect the Teensy 3.2 to Large RGB LED matrix display panels . The shield makes it easy to connect the 13 signals required to drive the display, connects an external 5V supply to power the display and Teensy, and brings out the Teensy's free...
− +
-50%
Standard LCD 16x2 - White on Blue 5V
$2.90 $5.80  
403 pc(s)
This is a standard 16 character by 2 line display. White text on Blue background. Utilizes the extremely common HD44780 parallel interface chipset ( datasheet ). Interface code is freely available. You will need ~11 general I/O pins to interface to this LCD screen. Features :...
− +
-20%
2 x AA Battery Holder
$0.80 $1.00  
Out-of-stock
Battery holder for two AA batteries, terminated with ~150mm leads
Out-of-stock
-20%
LilyPad LED Yellow (5pcs)
$4.75 $5.95  
7 pc(s)
This is a simple pack of five Yellow LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively...
− +
Infra-red Phototransistor 940nm
$0.99  
28 pc(s)
This is a very simple, clear infrared phototransistor. These devices operate between 940-950nm and work well with our infrared LED . Phototransistors are similar to photoresistors (or LDR) but produce both current and voltage, while photoresistors only produce current....
− +
-50%
LilyPad SimpleSnap Protoboard
$6.00 $12.00  
3 pc(s)
The LilyPad SimpleSnap Protoboard is a new, easy way to create e-textiles projects with LilyPad that are modular and can be disassembled or broken down, it's also a great way to prototype! The SimpleSnap Protoboard is made to connect to the SimpleSnap main board so that the board is...
− +
-20%
LilyPad LED Pink (5pcs)
$4.75 $5.95  
7 pc(s)
Here is a simple 5 pack of pink LEDs for LilyPad, or whatever else you can dream up. Light up the night! LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting...
− +
MakerBeam Square Headed Bolts w/ Hex Hole - M3x12
$15.00  
8 pc(s)
1 bag of approximately 100 M3 bolts, 12mm - especially made for MakerBeam. The 12 mm bolts have a square head for extra tight fixing, and a hex hole in the head. Length: 12mm.
− +
900mm MakerBeam Clear Anodised (Threaded)
$12.50  
1 pc(s)
MakerBeam is a Mini-T open-source building system. Mini-T is a miniature version of T-slot (a technology that is widely used for industrial automation, robotics and machine enclosures.) Not only is it small enough to work as a model building system, but it's also precise and strong enough to...
− +
Solder Wick - 1.5m Spool
$3.50  
2 pc(s)
Use this solder wick along with the solder sucker to clean up soldering messes. Wick really comes in handy when soldering or desoldering surface-mount parts.
− +
-20%
PicoBoard
$55.20 $69.00  
1 pc(s)
The PicoBoard allows you to create interactions with various sensors. Using the Scratch programming language, you can easily create simple interactive programs based on the input from sensors. The PicoBoard incorporates a light sensor, sound sensor, a button and a slider, as well as 4...
− +
Active Buzzer -12mm Continuous Tone
$0.50  
16 pc(s)
This is a small 12mm round active buzzer. It has additional circuitry in it which makes it easier to use but limits the buzzer to only making one type of a sound (tone). It only requires DC power source for the tone to be generated. This buzzer will switched on by a 3-5V DC voltage. No other...
− +
Micro Servo - 9g (360° Full Rotation)
$5.90  
Out-of-stock
Here is a simple, low-cost, high quality continuous 360° full-rotation servo motor for all your mechatronic needs. Small servo with a standard 3 pin power, control cable, and mounting hardware. This servo is very similar in size and specifications to the Hitec HS-55. Includes hardware as...
Out-of-stock
Infrared Obstacle Avoidance Sensor
$1.95  
10 pc(s)
The Infrared Obstacle Avoidance Sensor has a pair of infrared transmitting and receiving sensors. The infrared LED emits Infrared signals at certain frequency and when an obstacle appears on the line of infrared light, it is reflected back by the obstacle which is sensed by the receiver....
− +
-17%
4 x AA Battery Holder
$1.00 $1.20  
23 pc(s)
Battery holder for four AA batteries, terminated with ~150mm leads
− +
2 x AAA Battery Holder w/Switch and JST Connector
$2.25  
Out-of-stock
This 2xAAA Battery Holder with Switch and JST Connector is compatible with the BBC micro:bit. Supplied with ~150mm colour coded power leads and a JST connector at the end, this battery holder is light and can be attached to the back of BBC micro:bit cases. This battery holder features a lid...
Out-of-stock
MakerBeam T-Bracket (12 pcs)
$13.50  
4 pc(s)
The stainless steel T-bracket is a great addition to MakerBeam product range. It is compatible with both threaded and non-threaded MakerBeam. Includes 12x Stainless steel T-Bracket
− +
MakerBeam Right Angle Bracket (12 pcs)
$13.50  
2 pc(s)
The stainless steel right angle bracket is a great addition to MakerBeam product range. The right angle brackets give you the possibilty to place one beam on top of the other. Includes 12x Stainless steel right angle bracket
− +
MakerBeam L-Bracket 90 Degree (12 pcs)
$13.50  
6 pc(s)
The stainless steel corner bracket is a great addition to MakerBeam product range.Each MakerBeam bracket is conveniently engraved with it's angular measurement. Includes 12x Stainless steel 90 degree L-bracket
− +
-20%
Mifare 13.56MHz RC522 RFID Card Reader (3.3V Supply)
$6.35 $7.95  
5 pc(s)
MFRC522 is the highly integrated RFID card reader which works on non-contact 13.56MHz communication. Designed by NXP as a low power consumption, low cost and compact size read and write chip, this MFRC522 is the best choice in the development of portable hand-held devices. It supports...
− +
MakerBeam Square Headed Bolts w/ Hex Hole - M3x6
$24.90  
6 pc(s)
1 bag of approximately 250 pcs of stainless steel M3 bolts with square head and hex hole. Length: 6mm.
− +
Wire Strippers 30AWG
$9.90  
10 pc(s)
These are good quality 6" wire strippers with 6 gauge settings. We really wanted to stock these because they strip 30AWG wire wrap wire nicely as well as the standard 22AWG hook up wire. Features: 30, 28, 26, 24, 22, 20 AWG settings 0.25, 0.32, 0.4, 0.5, 0.6, 0.8 mm...
− +
9V Battery Snap - Heavy Duty
$0.80  
50 pc(s)
9V snap connector wth hard shell that is built stronger to last longer. Comes with color-coded wire leads. Great for replacements or projects. Length: ~ 15cm
− +
-50%
IOIO and Breadboard Holder
$2.60 $5.20  
1 pc(s)
This holder allows you to safely secure a IOIO development board and a self-adhesive breadboard in place to easily run jumper wires in between the two to form simple or complex prototyping circuits. Unlike it’s cousin, for the Arduino, this IOIO and breadboard holder has been made specifically...
− +
-40%
Serial Enabled 16x2 LCD - White on Blue 5V
$19.95 $33.20  
5 pc(s)
The serial enabled LCD allows you to control a parallel based LCD over a single-wire serial interface. Included in this product is a white on blue 16x2 LCD connected to our serial backpack. The backpack, based around a PIC16LF88, takes a TTL serial input and prints the characters it receives...
− +
MakerBeam Square Headed Bolts w/ Hex Hole - M3x25
$3.90  
4 pc(s)
1 bag of approximately 25 M3 bolts, 25mm - especially made for MakerBeam. The 25 mm bolts have a square head for extra tight fixing, and a hex hole in the head. Length: 25mm.
− +
Potentiometer Knob
$0.50  
10 pc(s)
This is a great looking rubberized knob for the potentiometer. Slides onto the Single Turn Potentiometer and holds tightly with a strong friction fit.
− +
TT Gear Motor - 200RPM
$4.50  
6 pc(s)
These inexpensive and reliable TT Gear Motors are an easy, low-cost way to get your projects moving. These gear motors require a voltage of 3-6VDC with a no load current of less than 150mA at 3V and possess a stall torque of 0.8kg.cm at 6V, a gearbox ratio of 48:1, and it comes with 2 x 200mm...
− +
MCP3008 - 8-Channel 10-Bit ADC With SPI Interface
$4.50  
5 pc(s)
The MCP3008 has a 8-Channel 10-bit analog to digital converter (ADC) with a simple to use SPI interface. Use this IC if your microcontroller does not have an ADC or have enough ADC lines. A great chip when you need to add additional ADC lines. Features : 2.7V to 5.5V supply...
− +
MakerBeam M3 Hex Nut Driver
$7.50  
3 pc(s)
This high quality hex nut driver (5,5mm) is a standard item in our MakerBeam Starter Kit. Work with both standard nuts and Cap nuts.
− +
Bluetooth 4.0 USB Module (v2.1 Back-Compatible)
$9.95  
17 pc(s)
This is a handy little USB Bluetooth 4.0 dongle. Utilising the CSR8510 chipset, this dongle is backwards compatible with v2.1 and earlier, but also supports the latest v4.0 low energy bluetooth transmission. It has a maximum distance of up to 50m and includes an indicator LED. Use this Dongle...
− +
Translucent Silicone Tubing 7mm ID x 9mm OD - 1 meter
$4.50  
39 pc(s)
This soft, flexible tubing is specially sourced for our Diaphragm Liquid Pump and mini liquid pump . It is made of silicone rubber which is odorless, flexible and resistant to high temperatures. It can be operated under a temperature range of -60 to +200℃. No tubing clamp is...
− +
MakerBeam 45 Degree Bracket (12 pcs)
$14.90  
6 pc(s)
The stainless steel 45 degree bracket is a great addition to MakerBeam product range. Each MakerBeam bracket is conveniently engraved with it's angular measurement. Includes 12x Stainless steel 45 degree bracket
− +
MakerBeam M3 Wing Type Bolts - 6mm
$15.00  
1 pc(s)
The wing type MakerBeam bolts make it easy to add a bracket midway between brackets already fastened. The rectangular screw head of the wing type bolt gives the possibility to add screws midway. You can insert the screw midway of a beam and turn it to ensure tightening. This way it is easy to...
− +
1 2 3 4 5 6 7 8 9 10 11
5 - 13

Recently Viewed