Delivery fee

New items

1 2 3 4 5 6 7 8 9 10 11 12 13
Sort Alphabetically: A to Z
63 Per Page
micro:bit Flex Sensor
$32.50  
4 pc(s)
This micro:bit Flex Sensor is specifically designed for micro:bit to detect flexing or bending in one direction. They were popularized by being used in the Nintendo PowerGlove as a gaming interface. This sensors are easy to use. It will vary its resistance depending on how much it...
− +
-50%
micro:Gamepad
$13.50 $27.00  
10 pc(s)
Micro:bit gamepad is an expansion gamepad based on micro:bit. You only need to plug in the micro:bit, it will turn into a wireless remote controller a wireless game console. This product packaged with acrylic plate, that giving it a good feel and no longer feels like a bare circuit...
− +
-30%
microSD Card - 64GB (Class 10, UHS-I )
$14.00 $20.00  
9 pc(s)
This is a class 10 64GB microSD memory card, perfect for housing operating systems for single board computers and a multitude of other information. Since this is a class 10 UHS-I microSD it is capable of transferring data at speeds up to 100MB/s allowing it to have a noticeable increase in...
− +
MicroSD Card Adapter
$0.20  
33 pc(s)
The micro SD card adapter looks like a regular-sized SD card with a slot in it for the microSD card. It allows you to transfer data between your device and a computer.
− +
-20%
microSD Shield
$19.60 $24.50  
1 pc(s)
Running out of memory space in your Arduino project? The SparkFun microSD Shield equips your Arduino with mass-storage capability, so you can use it for data-logging or other related projects. Communication with microSD cards is achieved over an SPI interface. The SCK, DI, and DO pins of the...
− +
microSD USB Reader
$3.50  
5 pc(s)
This is an awesome little microSD USB reader. Just slide your microSD card into the inside of the USB connector, then stick this into a USB port and the card's contents will pop up on your computer. Very sneaky - we love it! This little guy is great for pulling data logs off microSD media. This...
− +
-20%
Mifare 13.56MHz RC522 RFID Card Reader (3.3V Supply)
$6.35 $7.95  
5 pc(s)
MFRC522 is the highly integrated RFID card reader which works on non-contact 13.56MHz communication. Designed by NXP as a low power consumption, low cost and compact size read and write chip, this MFRC522 is the best choice in the development of portable hand-held devices. It supports...
− +
Mini 3-Wire Volt Meter (0 - 99.9VDC) - Blue
$2.95  
9 pc(s)
Put a voltage meter anywhere with this very handy display. These are often used by RC hobbyists for keeping track of batteries but we thought it would be great on a breadboard or enclosure. This is the 3-wire version of the volt meter, two wires are used to power it and the third wire is used...
− +
Mini 3-Wire Volt Meter (0 - 99.9VDC) - Green
$2.95  
3 pc(s)
Put a voltage meter anywhere with this very handy display. These are often used by RC hobbyists for keeping track of batteries but we thought it would be great on a breadboard or enclosure. This is the 3-wire version of the volt meter, two wires are used to power it and the third wire is used...
− +
Mini 3-Wire Volt Meter (0 - 99.9VDC) - Red
$2.95  
9 pc(s)
Put a voltage meter anywhere with this very handy display. These are often used by RC hobbyists for keeping track of batteries but we thought it would be great on a breadboard or enclosure. This is the 3-wire version of the volt meter, two wires are used to power it and the third wire is used...
− +
Mini 3-Wire Volt Meter (0 - 99.9VDC) - Yellow
$2.95  
7 pc(s)
Put a voltage meter anywhere with this very handy display. These are often used by RC hobbyists for keeping track of batteries but we thought it would be great on a breadboard or enclosure. This is the 3-wire version of the volt meter, two wires are used to power it and the third wire is used...
− +
Mini Breadboard - Black
$1.75  
14 pc(s)
This black Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! Perfect for tiny projects and for sticking onto the top of Arduino...
− +
Mini Breadboard - Blue
$1.75  
12 pc(s)
This blue Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! Perfect for tiny projects and for sticking onto the top of Arduino...
− +
Mini Breadboard - Green
$1.75  
18 pc(s)
This black Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! Perfect for tiny projects and for sticking onto the top of Arduino...
− +
Mini Breadboard - Red
$1.75  
17 pc(s)
This black Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! Perfect for tiny projects and for sticking onto the top of Arduino...
− +
Mini Breadboard - White
$1.75  
10 pc(s)
This white Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! If you run out of room, no worries, these mini breadboards can be...
− +
Mini Breadboard - Yellow
$1.75  
13 pc(s)
This black Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! Perfect for tiny projects and for sticking onto the top of Arduino...
− +
Mini HDMI to HDMI Cable - 1.5 meter
$7.99  
3 pc(s)
Connect an HDMI device with a mini HDMI port to one with a regular size HDMI port together with this basic HDMI cable. It has nice molded grips for easy installation, and is 1.5 meter long This cable works with Raspberry Pi Zero W. Dimensions: 1.5 meter Long
− +
Mini Liquid Pump - Horizontal (2.5V to 5VDC)
$2.95  
Out-of-stock
Looking for a battery powered liquid pump for your Micro:Bit project? This submersible Mini Liquid Pump operates between DC 2.5V to 5V. You can PWM the motor to speed up or slow down the flow rate. Works great with motor driver or a simple relay. This liquid pump does not come with...
Out-of-stock
Mini Lock-style Solenoid - 12VDC
$5.00  
8 pc(s)
Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This makes the solenoid able to pull from one end. This solenoid has a slug...
− +
Mini Lock-style Solenoid - 6VDC
$5.00  
10 pc(s)
Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This makes the solenoid able to pull from one end. This solenoid has a slug...
− +
Mini MP3 Module
$5.95  
5 pc(s)
The Mini MP3 Module is a small, low-cost mp3 module with a simplified audio output that can be connected directly to a speaker or an earphone jack. The module can be used as a stand-alone module with attached battery, speaker, and push buttons or used in combination with a microcontroller or...
− +
Mini Photocell (LDR - Light Dependent Resistor)
$1.00  
68 pc(s)
This is a very small photocell. A photocell changes (also called a photodetector , CdS or photoconductive cell) resistance depending on the amount of light it is exposed to. These little sensors make great ambient light triggers (when light in the room turns on, do something)....
− +
-50%
Mini Push Button Switch
$0.10 $0.20  
1043 pc(s)
Miniature Single Pole Single Throw switches. These are high quality momentary on switches. Perfect as a tactile reset switch. Mounts directly into standard bread boards. Rated up to 50mA. Documents : Datasheet (TSS-TC-0104)
− +
Mini Real Time Clock Module (DS3231) for Raspberry Pi
$11.95  
5 pc(s)
Unlike most computers, the Pi lacks a Real-Time Clock (RTC). This means the Pi doesn't know what time it is when powered on. While your Pi is connected to a network it will be able to set it's clock correctly using NTP ( Network Time Protocol ) server. Without a network connection your Pi...
− +
Mini RGB LED Controller with IR Remote
$3.90  
29 pc(s)
This mini 5-24VDC RGB LED Controller with 24 Button Infrared Remote is a unique RGB LED controller for use with all our 12VDC RGB LED strip. It can be used to control color effects for common anode style 5-24VDC RGB LED Lights strip. Maximum load is 2 amps per channel, 6 amps total. The...
− +
Mini RGB LED Controller with RF Remote
$3.50  
2 pc(s)
This mini 5-24VDC RGB LED Controller is loaded with functionality and has an RF remote range of up to 30 meters. It can be used to control color effects for common anode style 5-24VDC RGB LED Lights strip. The maximum load is 4 amps per channel, 12 amps total. Functions include 20 static...
− +
Mini Servo / ESC Tester
$4.50  
1 pc(s)
The Mini Servo / ESC Tester allow the user to test and exercise servos and set up a mode without requiring the use of a transmitter and receiver. It is easy to use and can test most servo technical parameters. It allows the user to control a servo directly to determine its neutral position...
− +
Mini Submersible Liquid Pump - Horizontal (2.5V to 5VDC)
$2.95  
4 pc(s)
Looking for a battery powered liquid pump for your Micro:Bit project? This Mini Submersible Liquid Pump operates between DC 2.5V to 5V. You can PWM the motor to speed up or slow down the flow rate. Works great with motor driver or a simple relay. This liquid pump does not come with tubing....
− +
Mini Submersible Liquid Pump Kit
$16.95  
3 pc(s)
Looking for a liquid pump for your plant watering project? This Mini Submersible Liquid Pump Kit comes with a miniature pump with driver board and battery pack for 2xAA battery. The driver board is designed to operate between 3V to 5VDC supply. It works with PWM input, so you can increase or...
− +
-40%
Mini Thermal Printer
$45.00 $75.00  
1 pc(s)
This is a thermal printer like you would find on a cash register or adding machine. It will print simple strings passed to it via TTL serial, bitmap images (poorly) and it even generates several different formats of barcodes! The thermal printer takes 57mm wide thermal paper with a...
− +
Mini USB Microphone
$7.95  
2 pc(s)
This plug-and-play Mini USB Microphone needs no driver, and its USB interface means you can use it with any computer, laptop, SBC, etc! Works great with a Raspberry Pi computer, but you can also use it with any other computer you want to record audio on. Simply plug it right in and...
− +
Mini Vacuum Pump - 6V
$9.99  
5 pc(s)
This mini vacuum pump operates at 6V and has enough suction for most small projects such as blood pressure monitors and automatic machine assembly. Features: Rated Voltage: 6VDC Rated Current: <420mA Inflation Time: <10 S (From 0 to 300 mmHg in a 500CC...
− +
Miniature Capacitive Fingerprint Sensor
$39.95  
1 pc(s)
Secure your project with biometrics - this all-in-one Capacitive Fingerprint Sensor will make adding fingerprint detection and verification super simple. Similar to the capacitive touchscreen, this captive fingerprint sensor measures your finger by using human conductivity, creating an...
− +
Miniature PIR Motion Sensor
$4.50  
6 pc(s)
This miniature PIR sensor is designed for motion detection. It uses pyroelectric sensor to detect motion by measuring changes in the infrared levels emitted by surrounding objects. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything moves after that...
− +
-51%
Momentary Push Button Switch - 12mm Square
$0.17 $0.35  
230 pc(s)
This is a standard 12mm square momentary button. What we really like is the large button head and good tactile feel (it 'clicks' really well). This button is great for user input on a PCB or a good, big reset button on a breadboard. Breadboard friendly!
− +
Mono 2.5W Class D Audio Amplifier - PAM8302
$8.50  
1 pc(s)
This super small mono amplifier is surprisingly powerful - able to deliver up to 2.5 Watts into 4-8 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.0V-5.5VDC. Since the amp is a class D, its very efficient (over 90% efficient when driving an 8Ω...
− +
Monochrome 0.91" 128x32 OLED Graphic Display - I2C
$9.50  
19 pc(s)
This miniature OLED display is perfect for adding graphics or texts to your next microcontroller project. It is small, measuring 0.91" across, but very readable due to the high contrast of an OLED display. This display is made of 128x32 individual blue OLED pixels, each one is turned on or...
− +
-15%
MOSFET Power Controller
$12.50 $14.75  
2 pc(s)
MOSFETs are awesome. They're like a switch that you flip electronically! This SparkFun MOSFET Power Controller makes it easy to switch a battery supply on and off using your favorite microcontroller. The board also has sewable pads so you can use it in e-textile projects that need more juice....
− +
Motor Driver Board v2 for the BBC micro:bit
$23.90  
7 pc(s)
This board provides a simple way to add motor driving capability to a BBC micro:bit. It allows two motors to be driven with full forward, reverse & stop control. It has terminal blocks to connect four input devices and a regulated 3V supply is fed in to the 80 way connector to power the...
− +
-20%
MP3 Trigger
$60.00 $75.00  
1 pc(s)
Make some noise with your next project! The MP3 Trigger board is built to make it MP3 sound integration easier than ever. The board has 18 external trigger pins that will directly trigger pre-selected MP3 tracks, and a full-duplex serial control port that provides full transport control,...
− +
MQ-135 Gas Sensor For Indoor Air Quality Monitor
$4.50  
2 pc(s)
This is a simple-to-use gas sensor for indoor air quality monitor, suitable for sensing NH3, NOx, alcohol, Benzene, smoke and CO2 in the air. The MQ-135 can detect NH3 and Alcohol gas concentrations anywhere from 10-300ppm and Benzene from 10-1000ppm. This sensor has a high sensitivity and...
− +
MQ-2 Gas Sensor (LPG, Propane, Hydrogen, Methane)
$4.20  
2 pc(s)
This MQ2 Gas Sensor module is useful for gas leakage detection. It is suitable for detectingI LPG, Propane, Hydrogen, Methane and other combustible steam. The sensitivity of the sensor can be adjusted by potentiometer. Features Good sensitivity to wide range of combustible gas...
− +
MQ-3 Gas Sensor (Alcohol)
$4.50  
3 pc(s)
This alcohol sensor is suitable for detecting alcohol concentration on your breath, just like your common breathalyzer. It has a high sensitivity and fast response time. The sensitivity of the sensor can be adjusted by potentiometer. Features Good sensitivity to alcohol gas...
− +
MQ-4 Gas Sensor (Natural Gas)
$4.20  
5 pc(s)
This MQ4 Gas Sensor module is useful for gas leakage detection. It is suitable for detectingI Methane, Propane, Butane, and other combustible gas. The sensitivity of the sensor can be adjusted by potentiometer. Features Good sensitivity to wide range of combustible gas High...
− +
MQ-5 Gas Sensor (LPG, Natural Gas)
$4.20  
3 pc(s)
This MQ5 Gas Sensor module is useful for gas leakage detection. It is suitable for detectingI Methane, Propane, Butane, and other combustible gas. The sensitivity of the sensor can be adjusted by potentiometer. Features High sensitivity to LPG, natural gas Low sensitivity...
− +
MQ-6 Gas Sensor (Propane, Butane and LPG)
$4.20  
3 pc(s)
This MQ6 Gas Sensor module is useful for gas leakage detection. It is suitable for detectingI Propane, Butane and LPG, and other combustible gas. The sensitivity of the sensor can be adjusted by potentiometer. Features Good sensitivity to wide range of combustible gas...
− +
MQ-7 Gas Sensor (Carbon Monoxide)
$4.50  
2 pc(s)
This is a simple-to-use Carbon Monoxide (CO) sensor, suitable for sensing CO concentrations in the air. The MQ-7 can detect CO-gas concentrations anywhere from 20 to 2000ppm. The sensitivity of the sensor can be adjusted by potentiometer. Features Good sensitivity to Carbon...
− +
MQ-8 Gas Sensor (Hydrogen)
$4.50  
2 pc(s)
This is a simple-to-use hydrogen gas sensor, suitable for sensing hydrogen concentrations in the air. The MQ-8 can detect hydrogen gas concentrations anywhere from 100-10000ppm. This sensor has a high sensitivity and fast response time. The sensitivity of the sensor can be adjusted by...
− +
MQ-9 Gas Sensor (Carbon Monoxide / Combustible)
$4.50  
4 pc(s)
This is a simple-to-use Carbon Monoxide / Combustible gas sensor, suitable for sensing Carbon Monoxide / Combustible gas concentrations in the air. The MQ-9 can detect Carbon Monoxide / Combustible gas concentrations anywhere from 100-10000ppm. This sensor has a high sensitivity and fast...
− +
Needle Nose Pliers
$6.80  
3 pc(s)
Mini Pliers. These are great little pliers! A must have for any hobbyist or electrical engineer. Crucial for inserting devices into bread boards and bending pins. 4" long.
− +
Negatron DC-DC Converter
$36.50  
4 pc(s)
Negatron is a buck-boost converter that takes a positive voltage and turns it into a negative voltage that you can use with amplifier circuits and more. The output is adjustable from -1.3V to -12V. Negatron is also able to step up/step down the magnitude of the voltage. For example,...
− +
NodeMCU v2 - Lua Based ESP8266 Development Board
$19.50  
1 pc(s)
NodeMcu is an open source IoT platform based on the ESP-12 module. The board is pre-loaded with LUA firmware that enable you to prototype your IoT product within a few Lua script lines. You can also program it using Arduino IDE. This development kit includes a CP2102 TTL to USB chip for...
− +
Non-contact Liquid Level Sensor (Open Collector Output)
$19.95  
4 pc(s)
This non-contact liquid level sensor can be triggered when the liquid level fall below the sensor attached to the outside surface of a non-metal container. Unlike traditional liquid level sensors, it does not need to be immersed into liquid. So, in this way, liquid will not be contaminated...
− +
Non-contact Liquid Level Sensor (PNP Output)
$19.95  
2 pc(s)
This non-contact liquid level sensor can be triggered when the liquid level fall below the sensor attached to the outside surface of a non-metal container. Unlike traditional liquid level sensors, it does not need to be immersed into liquid. So, in this way, liquid will not be contaminated...
− +
-11%
Non-Invasive Current Sensor - 30A
$15.50 $17.50  
1 pc(s)
This non-invasive current sensor (also known as a “split core current transformer”) can be clamped around the supply line of an electrical load to tell you how much current is passing through it. It does this by acting as an inductor and responding to the magnetic field around a...
− +
Non-Isolated Single Relay Module For 3V Controller
$6.50  
1 pc(s)
This single channel Relay Module is specially designed for low-voltage devices and works well with 3.3V power supply. It can be used to control the lighting, electrical and other equipments through the digital IO port. The module comes with on-board back EMF protection to eliminate the...
− +
NPN Transistors - 2N2222A
$0.50  
30 pc(s)
2N2222A is designed for high speed switching application at collector current up to 600mA, and feature useful current gain over a wide range of collector current, low leakage currents and low saturation voltage.
− +
NPN Transistors - 45V 800mA (BC337)
$0.50  
677 pc(s)
This BC337 is a drop-in replacement for the 2N2222 Transistor This is the BC337, an NPN silicon BJT (Bipolar Junction Transistor). This little transistor can help in your project by being used to help drive large loads or amplifying or switching applications. The BC337 is specifically rated...
− +
NVIDIA JetBot Mounting Kit
$3.50  
8 pc(s)
This mounting kit is intended for use with the NVIDIA JetBot robot. It includes the necessary screws and nuts to secure the Jetson Nano, motors, camera, etc., to the 3D printed chassis. Kit includes: 4x M3*25 Phillips pan head machine screw (stainless steel) 4x M3 nuts...
− +
Nylon Ball Caster Wheel
$1.20  
39 pc(s)
The Nylon Ball Caster has the capbility to support maximum 10kg payload. The Caster is strong and lightweight. It has 20mm high round body, with a total weight of only 25g. Documents : Dimension drawing
− +
Optical Dust Sensor - GP2Y1014AU0F
$19.90  
2 pc(s)
Sharp's GP2Y1014AU0F is an optical air quality sensor, designed to sense dust particles. An infrared emitting diode and a phototransistor are diagonally arranged into this device, to allow it to detect the reflected light of dust in air. It is especially effective in detecting very fine...
− +
Opto-Isolated Relay Module - 16 Channels (5V)
$22.99  
1 pc(s)
This 16 channels Relay Module can be used to control the lighting, electrical and other equipments through the digital IO port. The digital input circuit is optically isolated from the relay, so your controller is protected from voltage spikes and surges. The module is controlled with 5V...
− +
1 2 3 4 5 6 7 8 9 10 11 12 13

Recently Viewed