Delivery fee

New items

1 2 3 4 5 6 7 8 9 10 11 12 13
Sort by Popularity
63 Per Page
6 x AA Battery Holder
$1.40  
19 pc(s)
Battery holder for six AA batteries, terminated with ~150mm leads
− +
-20%
2 x AAA Battery Holder
$0.80 $1.00  
7 pc(s)
Battery holder for two AAA batteries, terminated with ~150mm leads
− +
DIP Switch - 8 Position
$0.65  
26 pc(s)
DIP switch with 8 individual switch positions. The pins have 2.54mm spacing - fits great into a breadboard! Works great as general control switches.
− +
Protoboard, Double-Sided Pad-per-Hole, 4x6cm - White
$1.95  
3 pc(s)
The prototyping circuit board has a general purpose double sided pad-per-hole pattern which is good for general purpose analog and digital use. 0.95mm holes are drilled on 2.54mm centers. Size: 4 x 6cm, 1.6mm thick
− +
Mini Breadboard - Green
$1.75  
18 pc(s)
This black Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! Perfect for tiny projects and for sticking onto the top of Arduino...
− +
-10%
Break Away Headers - 40-pin Male (Long Centered, PTH, 0.1")
$1.80 $2.00  
171 pc(s)
This is a row of 40 break away headers spaced 0.1" (2.54mm) apart with long pins on both sides. This header is especially useful when you need to connect a PCB to a solderless breadboard. Each header can be broken apart to your preference to fit custom PCBs or general custom headers.
− +
8-channel Bi-directional Logic Level Converter - TXS0108
$3.20  
1 pc(s)
If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The 8-channel Bi-directional Logic Level Converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V...
− +
10-Pin Alligator Clip to Female Rainbow Wire
$5.00  
9 pc(s)
For bread-boarding with unusual non-header-friendly surfaces, these rainbow wire will be your best friends! No longer will you have long strands of alligator clips that are grabbing little wires. These wires have a premium female header on one end, and a grippy mini alligator clip on the...
− +
Digital PWM Motor Speed Controller - 5A
$7.90  
2 pc(s)
This DC motor controller allows you to control both the speed and direction of a DC motor without sacrificing torque. It can provides up to a maximum continuous current of 5A to your DC motor or other DC load using a Pulse Width Modulated (PWM) with a Duty cycle fully adjustable from 10%-100%....
− +
-30%
Breadboard-Friendly 3.5mm Stereo Headphone Jack
$1.05 $1.50  
84 pc(s)
Pipe audio in or out of your project with this very handy breadboard-friendly audio jack. It's a stereo jack with disconnect-switches on Left and Right channels as well as a center ground pin. You can use any 3.5mm stereo cable with this jack. The pins are on 2.54mm spacing so it plugs very...
− +
2.4GHz / 5GHz Duck Antenna RP-SMA w/ IPEX Interface Cable
$4.50  
11 pc(s)
2.4GHz/5GHz Duck Antenna with regular RP-SMA RF connector and IPEX interface cable for connecting to our dual mode wireless module . Includes: 1x Antenna 1x IPEX Interface cable Features: Type: Omni-Directional Frequency: 2400~2500MHz/5150~5850MHz Gain: 3dBi...
− +
USB Cable A to B - 1 meter
$3.95  
1 pc(s)
This is the classic. It's an A to B Male/Male type peripheral cable for printers and other large peripheral devices. Compatible with Arduino Uno and Arduino Mega. Dimensions: 1 meter
− +
Mini Breadboard - Red
$1.75  
17 pc(s)
This black Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! Perfect for tiny projects and for sticking onto the top of Arduino...
− +
Breadboard Power Supply 5V/3.3V
$2.95  
5 pc(s)
This Breadboard Power Supply Module plugs directly into a solderless breadboard and provides both 3.3V and 5V power directly to the breadboard power rails. The board accepts 7 to 12V DC input via the barrel jack or 5V via the mini-B USB port. It provides two regulated, fuse protected outputs...
− +
3-Blade Nylon Boat Propeller - 40mm Diameter
$2.50  
11 pc(s)
Small fiber reinforced nylon propeller for boat, 3 blades and 40mm in diameter. It push fits directly onto our toy DC motor . Dimensions : Ø40 x 18.5mm Center bore：1.9 mm
− +
5 x AA Battery Holder
$1.30  
21 pc(s)
Battery holder for five AA batteries, terminated with ~150mm leads
− +
USB mini-B Cable - 50cm
$3.00  
3 pc(s)
This is the standard A-miniB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your USB Hubs, FTDI Breakout Board and USB Lipo charger w/Mini B connector, among other things. Dimensions: 50cm
− +
USB mini-B Cable - 1 meter
$3.95  
7 pc(s)
This is the standard A-miniB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your USB Hubs, FTDI Breakout Board and USB Lipo charger w/Mini B connector, among other things. Dimensions: 1 meter
− +
DIP Switch - 4 Position
$0.45  
Out-of-stock
DIP switch with 4 individual switch positions. The pins have 2.54mm spacing - fits great into a breadboard! Works great as general control switches.
Out-of-stock
-20%
IMX219 Camera Module For Pi Cam V2 - 8 MegaPixels, 160° View Angle
$27.60 $34.50  
7 pc(s)
This IMX219 camera module is supplementary for Raspberry Pi official camera to fulfil the demands for wide view angle. It features 8-megapixel 160 degree view angle. If you got a Raspberry Pi Camera Board V2 and require wide view angle, here it is. Note : Follow the instruction in this...
− +
-25%
SparkFun Motor Driver - Dual TB6612FNG (with Headers)
$14.65 $19.55  
8 pc(s)
The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled,...
− +
32x8 SPI Dot Matrix Display Module - MAX7219 - Red
$14.99  
1 pc(s)
This 32 x 8 SPI Dot Matrix Module allows you to experiment with dot matrix LED's without all the complicated wiring. The module makes use of the MAX7219 LED driver which handles all the complicated stuff such as multiplexing the LEDs and driving them at the correct currents. What's more, the...
− +
600mm MakerBeam Clear Anodised (Threaded)
$9.50  
30 pc(s)
MakerBeam is a Mini-T open-source building system. Mini-T is a miniature version of T-slot (a technology that is widely used for industrial automation, robotics and machine enclosures.) Not only is it small enough to work as a model building system, but it's also precise and strong enough to...
− +
Toy DC Motor Bracket - Plastic
$1.50  
13 pc(s)
This compact plastic bracket enables convenient mounting of our popular Toy DC Motors . Note: Toy DC motor not included. Documents : Dimension drawing
− +
MQ-2 Gas Sensor (LPG, Propane, Hydrogen, Methane)
$4.20  
2 pc(s)
This MQ2 Gas Sensor module is useful for gas leakage detection. It is suitable for detectingI LPG, Propane, Hydrogen, Methane and other combustible steam. The sensitivity of the sensor can be adjusted by potentiometer. Features Good sensitivity to wide range of combustible gas...
− +
-19%
BBC micro:bit v2 Go Kit
$25.95 $32.00  
Out-of-stock
The micro:bit V2.2 board is backwards compatible with other micro:bit boards, ecosystems and accessories. Codes written for the earlier version (v1 and v2) are able to run on this board without any changes. The BBC micro:bit is a pocket-sized computer that lets you get creative with...
Out-of-stock
-31%
Illuminated Capacitive Switch Module - Blue
$2.50 $3.60  
2 pc(s)
This Illuminated Capacitive Switch Module feature an innovative method of combining the benefits of capacitive switching with colour back lighting. The backlit switching solution allows makers to prototype and evaluate HMI designs without the need to develop custom capacitive sensors and back...
− +
Toy DC Motor Bracket - Metal
$0.20  
9 pc(s)
This compact metal bracket enables convenient mounting of our popular Toy DC Motors . ‎Ø2mm mounting holes. Note: Toy DC motor not included.
− +
-15%
CAN-BUS Shield
$38.25 $45.00  
1 pc(s)
The CAN-BUS Shield provides your Arduino or Redboard with CAN-BUS capabilities and allows you to hack your vehicle. This shield allows you to poll the ECU for information including coolant temperature, throttle position, vehicle speed, and engine rpms. You can also store this data or output...
− +
Low Profile Aluminum Case For Raspberry Pi 4
$19.99  
7 pc(s)
Raspberry Pi is everybody's favorite little computer; the last thing you want is something bad happens to it. Why not protect it with an aluminum case? This elegantly crafted Raspberry Pi 4 case is designed for the perfect combination of durability, affordability, and strength. The case...
− +
-33%
Rocker Switch - SPDT Small
$0.60 $0.90  
29 pc(s)
The rocker switch is a classic and this one is a great size for an unobtrusive on/off switch. It can be panel mounted and has two tabs for connecting wire. You can either solder wire or use a quick-connect connector. Features : Maximum Voltage: 250VAC Maximum Current: 3A @...
− +
T-Slot Nuts For MakerBeamXL (50pcs)
$17.50  
8 pc(s)
The MakerBeamXL T-slot nut is made of stainless steel and was specially designed to slide into the T-slot grooves of the MakerBeamXL profile. The T-slot nut is great to fasten brackets or corner cubes.
− +
Corner Cube Kit For MakerBeamXL - Black
$25.70  
3 pc(s)
This Corner Cubes can join up to three MakerBeamXL in right angle. Corner Cubes are joined with a beam by the threaded beam ends. Each set contains 12 15mmx15mmx15mm cubes Note : Not compatible with 10mmx10mm MakerBeam.
− +
Timing Pulley - Shaft Mount (20T, 5mm Bore)
$2.50  
3 pc(s)
These shaft-mountable aluminum timing pulleys use 2GT timing belts and attach to a 5mm output shaft with a pair of set screw. They have 20 teeth with a gear pitch of 2mm, an outer diameter of 16mm, a bore of 5mm, and requires a belt width of 6mm. Specification Teeth: 20...
− +
Grove Cable With 4-Pin Female Jumper
$1.50  
2 pc(s)
This Grove Cable with 4-Pin Female Jumper lets you bridge between a Grove socket and device with standard 1" header pins. Cable length approx. 200mm
− +
USB mini-B Cable - 30cm
$2.50  
4 pc(s)
This is the standard A-miniB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your USB Hubs, FTDI Breakout Board and USB Lipo charger w/Mini B connector, among other things. Dimensions: 30cm
− +
DIP Switch - 2 Position
$0.35  
42 pc(s)
DIP switch with 2 individual switch positions. The pins have 2.54mm spacing - fits great into a breadboard! Works great as general control switches.
− +
-30%
Membrane 4x4 Matrix Keypad
$1.65 $2.35  
5 pc(s)
This 16-button keypad provides a useful human interface component for microcontroller projects. It's made of a thin, flexible membrane material with an adhesive backing so you can attach it to nearly anything. The keys are connected into a matrix, so you only need 8 microcontroller pins...
− +
-33%
Jumper Cap - 2 Pin (Pack of 5)
$0.30 $0.45  
249 pc(s)
These are two pin jumper caps (also called shunts) that will create an electrical connection between two pin headers. Commonly used to modify settings on a board or device.
− +
Mini Lock-style Solenoid - 12VDC
$5.00  
8 pc(s)
Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This makes the solenoid able to pull from one end. This solenoid has a slug...
− +
-30%
Push Button Assortment Pack of 5 (Assembled)
$5.50 $7.85  
30 pc(s)
These push buttons are great for all sorts of projects. This assortment comes with 5 different colors and the button is soldered to a breakout board with a 10K pull-up resistor and 2.54mm male header. The colored caps are removable . The dimension of the button is 12mm x 12mm.
− +
-20%
LilyPad LED White (5pcs)
$4.75 $5.95  
Out-of-stock
This is a simple pack of five White LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively...
Out-of-stock
-20%
7" Capacitive Touchscreen LCD - 1024x600 + 16GB microSD Card For Pi 4
$95.00 $118.75  
5 pc(s)
This 7" high resolution LCD display is designed to provide a quick and easy interface to Raspberry Pi 2 / Pi 3 / Pi 4 and other mini PC such as BeagleBone Black, Banana Pi and PC running on Windows 7/8/10. It features a fully assembled 7" 1024x600 IPS high resolution LCD screen with...
− +
-50%
Solar Panel - 18V 2.5W
$18.75 $37.50  
2 pc(s)
Need a clean energy source to power you project? Check out this high quality, high output solar panel. Each panel features high efficient polycrystalline cells mounted onto a fibreglass PCB and covered with epoxy resin which protect the cells without reducing efficiency. A weatherproof plastic...
− +
Pixy2 CMUCam5
$105.00  
Out-of-stock
The Pixy2 CMUcam5 is smaller, faster and more capable than the original Pixy. Like its predecessor, the Pixy2 can learn to detect objects that you teach it, just by pressing a button. Additionally, the Pixy2 has new algorithms that detect and track lines for use with line-following robots....
Out-of-stock
-55%
3DR Safety Switch for PX4 / Pixhawk
$4.50 $9.90  
60 pc(s)
3D Robotics Safety Switch for PX4 / Pixhawk is a mandatory component of the Pixhawk autopilot system, allowing you to handle your vehicle safety by disabling the motors until you activate the switch. The safety switch features a three-position DF13 connector to connect directly to the...
− +
-20%
SOIC to DIP Adapter 8-Pin
$3.95 $4.95  
1 pc(s)
The SparkFun 8-Pin SOIC to DIP Adapter is a small PCB that lets you adapt SOIC packages into a DIP footprint. These tiny boards are useful for modding and upgrading devices that use 8-pin DIP ICs, when the upgraded IC is only available in a SOIC footprint. You can also use these adapters for...
− +
micro:bit EduFun Mini Project Kit - Automated Plant Watering System
$21.00  
3 pc(s)
SGBotic has created a series of Micro:Bit EduFun Mini Project Kits with an aim of making advance devices available to micro:bit inventors. Much efforts have been devoted to designing the MakeCode block packages to remove the complexity of using these devices, making it easier for inventors to...
− +
STM8 & STM32 Emulator and Programmer (Assorted Colors)
$9.99  
2 pc(s)
This low cost, easy to use USB Emulator and Programmer supports ST's range of STM8 and STM32 microcontrollers .The programmer will work with software that is compatible with the ST-Link V2 programmer, including Arduino IDE and ST's STM32CubeProg . This programmer is also ideal for use...
− +
HDMI to VGA Video Adapter w/Audio and USB Power Out (Metal Case)
$9.95  
1 pc(s)
This nifty adapter cable with durable metal casing converts the digital HDMI video signals which are outputted from Raspberry Pi, into an analog signal required by the widely used VGA monitor. This adapter has an audio jack that provides stereo headphone/line out (HDMI 1.3 cables carry both...
− +
-20%
LilyPad LED Blue (5pcs)
$4.75 $5.95  
3 pc(s)
This is a simple pack of five Blue LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively...
− +
MakerBeam Bearing
$29.00  
8 pc(s)
Stainless steel bearing for the MakerBeam aluminum profile. The bearing is 5mm thick. The outside dimension of the bearing is 13mm. The iinside diameter measures 3mm. If you fit it to a MakerBeam it will extend about 1.5mm from the edge of the beam. The 3mm inner diameter makes is easy to...
− +
-20%
Load Sensor - 50kg
$7.90 $9.90  
12 pc(s)
This load cell / sensor, sometimes called a strain gauge, is the same one found in digital bathroom scales. Each straight bar load cell is made from an aluminum-alloy and is capable of measure up to about 50kg. Documents : Specifications Load Sensor Tutorial (NerdKits)
− +
USB Cable A to B - 50cm
$3.00  
Out-of-stock
This is the classic. It's an A to B Male/Male type peripheral cable for printers and other large peripheral devices. Compatible with Arduino Uno and Arduino Mega. Dimensions: 50cm
Out-of-stock
Mini Vacuum Pump - 6V
$9.99  
5 pc(s)
This mini vacuum pump operates at 6V and has enough suction for most small projects such as blood pressure monitors and automatic machine assembly. Features: Rated Voltage: 6VDC Rated Current: <420mA Inflation Time: <10 S (From 0 to 300 mmHg in a 500CC...
− +
2WD Robot Chassis Kit
$19.80  
1 pc(s)
This 2WD Robot Chassis Kit is easy to assemble and use robot chassis platform. It provides you with everything you need to give your robot a fast two wheel drive platform with plenty of room for expansion to add various sensors and controllers (such as Arduino). All you need to do is...
− +
-15%
MOSFET Power Controller
$12.50 $14.75  
2 pc(s)
MOSFETs are awesome. They're like a switch that you flip electronically! This SparkFun MOSFET Power Controller makes it easy to switch a battery supply on and off using your favorite microcontroller. The board also has sewable pads so you can use it in e-textile projects that need more juice....
− +
Audio Cable for BBC micro:bit
$4.50  
20 pc(s)
This is the perfect cable choice for those that want to output music or sound from BBC micro:bit to headphones or speakers. At one end of the cable are the black and red crocodile clips, which connect to the micro:bit GND and Pin 0 respectively. At the other end of the cable is a 3.5mm...
− +
-10%
SGBotic Micro:bit Starter Kit (w/BBC micro:bit v2.2)
$62.95 $69.95  
2 pc(s)
If you are a beginner looking to learn programming and electronics, look no further than this SGBotic Micro:bit Starter Kit. This kit is designed to introduce programming and basic electronic interfacing to a user with absolutely no experience in these areas. It contains everything you need...
− +
3.3V, 1A Step-Down Voltage Regulator D24V10F3
$14.50  
5 pc(s)
This D24V10F3 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 3.3V while allowing for a maximum output current of 1 A. This regulator offers typical efficiencies between 80% and 90% and has a very low dropout, so it can be used with input...
− +
-50%
USB mini-B Cable - 1.5 meters w/Ferrite Bead
$2.25 $4.50  
53 pc(s)
This is the standard A-miniB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your USB Hubs, FTDI Breakout Board and USB Lipo charger w/Mini B connector, among other things. The Ferrite Bead helps to eleminate EMI. Dimensions: 1.5 meter
− +
-50%
Breakout Board for BBC Micro:bit
$4.45 $8.90  
201 pc(s)
Unlock the potential of BBC Micro:bit with this assembled Breakout Board! This breakout board offers an easy way to connect additional circuits and hardware to the pins on the edge of the BBC micro:bit. It provides access to all of the BBC Micro:bit processor pins allowing a lot more extra...
− +
Mini Liquid Pump - Horizontal (2.5V to 5VDC)
$2.95  
Out-of-stock
Looking for a battery powered liquid pump for your Micro:Bit project? This submersible Mini Liquid Pump operates between DC 2.5V to 5V. You can PWM the motor to speed up or slow down the flow rate. Works great with motor driver or a simple relay. This liquid pump does not come with...
Out-of-stock
1 2 3 4 5 6 7 8 9 10 11 12 13

Recently Viewed