Delivery fee

New items

1 2 3 4 5 6 7 8 9 10
4 - 13
Sort by Price: High to Low
63 Per Page
BH1750 Ambient Light Sensor Breakout
$23.70  
5 pc(s)
BH1750FVI is an digital Ambient Light Sensor IC for I2C bus interface. This IC is the most suitable to obtain the ambient light data for adjusting LCD and Keypad backlight power of Mobile phone. It is possible to detect wide range at High resolution. Features I2C bus...
− +
ESP32 Development Board U.FL w/Antenna
$23.50  
14 pc(s)
The ESP32 Development Board is a low-footprint, minimal system development board powered by ESP-WROOM-32 module. The ESP-WROOM-32 is a powerful and compact module that combines Wi-Fi and Bluetooth to support a wide range of applications that require wireless and internet connectivity. This...
− +
RGB and Gesture Sensor - APDS-9960
$23.00  
2 pc(s)
This is the SparkFun RGB and Gesture Sensor, a small breakout board with a built in APDS-9960 sensor that offers ambient light and color measuring, proximity detection, and touchless gesture sensing. With this RGB and Gesture Sensor you will be able to control a computer, microcontroller,...
− +
-6%
RS232 Shifter SMD
$23.00 $24.50  
2 pc(s)
The smallest and easiest to use serial conversion circuit on the market! This board has one purpose in life - to convert RS232 to TTL and vice versa (TX and RX). This will allow a microcontroller to communicate with a computer. Shifter SMD is powered from the target application and can run at...
− +
Opto-Isolated Relay Module - 16 Channels (5V)
$22.99  
1 pc(s)
This 16 channels Relay Module can be used to control the lighting, electrical and other equipments through the digital IO port. The digital input circuit is optically isolated from the relay, so your controller is protected from voltage spikes and surges. The module is controlled with 5V...
− +
-8%
LilyPad Arduino 328 Main Board
$22.95 $24.95  
1 pc(s)
The LilyPad Arduino 328 Main Board is an Arduino-programmed microcontroller designed to be easily integrated into e-textiles and wearable projects. It offers the same functionality you find in other Arduino boards, in a lightweight, round package designed to minimize snagging and profile,...
− +
-40%
Serial Enabled 20x4 LCD - Black on Green 5V
$22.75 $37.85  
1 pc(s)
The serial enabled LCD allows you to control a parallel based LCD over a single-wire serial interface. Included in this product is a black on green 20x4 LCD connected to our serial backpack. The backpack, based around a PIC16F88, takes a TTL serial input and prints the characters it receives...
− +
-50%
SparkFun moto:bit
$22.50 $45.00  
4 pc(s)
The SparkFun moto:bit is a fully loaded "carrier" board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional robotics platform. The moto:bit offers a simple, beginner-friendly robotics controller capable of operating a basic robotics chassis. Onboard...
− +
Ultrasonic Sensor with Waterproof Probe
$22.50  
6 pc(s)
Most ultrasonic distance sensors aren't waterproof which can be a problem if you need your project to withstand the elements outdoors. No need to worry any more! The probe of this sensor is waterproof and is suitable for outdoor applications such as car reversing sensors, security alarms,...
− +
VL53L0X Time-of-Flight Distance Sensor Carrier with Voltage Regulator, 200cm Max
$22.50  
5 pc(s)
The VL53L0X from ST Microelectronics is a time-of-flight ranging system integrated into a compact module. This board is a carrier for the VL53L0X, so we recommend careful reading of the VL53L0X datasheet (1MB pdf) before using this product. The VL53L0 uses ST's FlightSense...
− +
-20%
Jumper Wires Premium 6" F/F Pack (Approx. 100pcs)
$22.40 $28.00  
13 pc(s)
These are 6" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Approx. 100 pcs per pack
− +
MakerBeam Corner Cube Kit - Black
$21.50  
2 pc(s)
The corner cubes are designed especially for makerbeams with threaded beam ends. The bag contains: 12x Aluminum corner cubes 50x Stainless steel countersunk bolts with flat head (M3 x 6) 1x Allen key Note : Not compatible with non-threaded MakerBeam.
− +
micro:bit EduFun Mini Project Kit - Automated Plant Watering System
$21.00  
3 pc(s)
SGBotic has created a series of Micro:Bit EduFun Mini Project Kits with an aim of making advance devices available to micro:bit inventors. Much efforts have been devoted to designing the MakeCode block packages to remove the complexity of using these devices, making it easier for inventors to...
− +
Analog TDS (Total dissolved solids) Sensor Kit
$20.95  
3 pc(s)
This is an Arduino-compatible TDS Sensor Kit for measuring Total dissolved solids value of the water. TDS indicates how many milligrams of soluble solids dissolved in one litre of water. In general, the higher the TDS value, the more soluble solids dissolved in water, and the less clean the...
− +
Low Profile Aluminum Case For Raspberry Pi 4
$19.99  
7 pc(s)
Raspberry Pi is everybody's favorite little computer; the last thing you want is something bad happens to it. Why not protect it with an aluminum case? This elegantly crafted Raspberry Pi 4 case is designed for the perfect combination of durability, affordability, and strength. The case...
− +
Non-contact Liquid Level Sensor (Open Collector Output)
$19.95  
4 pc(s)
This non-contact liquid level sensor can be triggered when the liquid level fall below the sensor attached to the outside surface of a non-metal container. Unlike traditional liquid level sensors, it does not need to be immersed into liquid. So, in this way, liquid will not be contaminated...
− +
ESP32 Development Board
$19.95  
2 pc(s)
The ESP32 Development Board is a low-footprint, minimal system development board powered by ESP-WROOM-32 module. The ESP-WROOM-32 is a powerful and compact module that combines Wi-Fi and Bluetooth to support a wide range of applications that require wireless and internet connectivity. This...
− +
-20%
Sparkfun XBee Wireless Shield
$19.95 $24.95  
1 pc(s)
Xbee radios are an awesome way to add wireless capability to your Arduino project and now it's even easier with the XBee Shield. The shield form-factor mates directly with any dev board that has an Arduino standard footprint and equips it with wireless communication capabilities using the...
− +
SGBotic Micro:bit Robot Board
$19.95  
7 pc(s)
SGBotic Micro:bit Robot Board is designed for development of an autonomous obstacle avoidance robot or line following robot using BBC micro:bit . This Robot Board is capable of driving two DC motors. It has a dedicated port for HC-SR04 Ultrasonic Sensor and Line Follower Array . The...
− +
-40%
Serial Enabled 16x2 LCD - White on Blue 5V
$19.95 $33.20  
5 pc(s)
The serial enabled LCD allows you to control a parallel based LCD over a single-wire serial interface. Included in this product is a white on blue 16x2 LCD connected to our serial backpack. The backpack, based around a PIC16LF88, takes a TTL serial input and prints the characters it receives...
− +
Non-contact Liquid Level Sensor (PNP Output)
$19.95  
2 pc(s)
This non-contact liquid level sensor can be triggered when the liquid level fall below the sensor attached to the outside surface of a non-metal container. Unlike traditional liquid level sensors, it does not need to be immersed into liquid. So, in this way, liquid will not be contaminated...
− +
Adafruit NeoPixel 1/4 60 Ring - 5050 RGB LED w/ Integrated Drivers
$19.90  
2 pc(s)
The biggest NeoPixel Ring yet! With four of these you can make a huge ring with 60 ultra bright smart LED NeoPixels are arranged in a circle with a 6.2" diameter. Each order comes with just the quarter ring. Four of this item are required to make a large ring. You will have to solder them...
− +
High Torque Metal Gear Servo (270° Rotation)
$19.90  
3 pc(s)
This high-torque servo now comes with metal-gear for extra-high torque (10.5 kg/cm!) and reliability! It can rotate at approximately 270 degrees with a classic 500µS to 2500µS pulse. You can use any servo code, hardware or library to control these servos. Good for applications that require...
− +
Micro Metal Gearmotor 50:1
$19.90  
3 pc(s)
This micro metal gearmotor has a long (0.365" or 9.27 mm), D-shaped metal output shaft that matches the Wheel 42x19mm and Wheel 32x7mm . The brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch), or you can use the mounting bracket or...
− +
Smart Dust Sensor - SM-PWM-01C
$19.90  
5 pc(s)
This is a dust sensor that detects the dust particle concentration in air by using optical sensing method. An infrared light emitting diode (IR LED) and a photo-sensor are optically arranged in the device. The photo-sensor detects the reflected IR LED light by dust particles in air. The...
− +
Optical Dust Sensor - GP2Y1014AU0F
$19.90  
2 pc(s)
Sharp's GP2Y1014AU0F is an optical air quality sensor, designed to sense dust particles. An infrared emitting diode and a phototransistor are diagonally arranged into this device, to allow it to detect the reflected light of dust in air. It is especially effective in detecting very fine...
− +
2WD Robot Chassis Kit
$19.80  
1 pc(s)
This 2WD Robot Chassis Kit is easy to assemble and use robot chassis platform. It provides you with everything you need to give your robot a fast two wheel drive platform with plenty of room for expansion to add various sensors and controllers (such as Arduino). All you need to do is...
− +
FTDI Basic Breakout 3.3/5V
$19.70  
1 pc(s)
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the...
− +
-20%
microSD Shield
$19.60 $24.50  
1 pc(s)
Running out of memory space in your Arduino project? The SparkFun microSD Shield equips your Arduino with mass-storage capability, so you can use it for data-logging or other related projects. Communication with microSD cards is achieved over an SPI interface. The SCK, DI, and DO pins of the...
− +
NodeMCU v2 - Lua Based ESP8266 Development Board
$19.50  
1 pc(s)
NodeMcu is an open source IoT platform based on the ESP-12 module. The board is pre-loaded with LUA firmware that enable you to prototype your IoT product within a few Lua script lines. You can also program it using Arduino IDE. This development kit includes a CP2102 TTL to USB chip for...
− +
VL6180X ToF Distance Sensor Carrier with Voltage Regulator, 60cm Max
$18.95  
2 pc(s)
This sensor is a carrier/breakout board for ST's VL6180X proximity and ambient light sensor, which measures the range to a target object up to 20 cm away (or 60 cm with reduced resolution ). The VL6180X uses time-of-flight measurements of infrared pulses for ranging, allowing it to give...
− +
Slip Ring - 12 Wire (2A)
$18.95  
1 pc(s)
This is a 12 wire slip ring, a remarkably simple electromechanical assembly that allows electronic signals to be passed through its rotating innards. Commonly, you'd find slip rings in wind turbines, radar antennae, or anything else that requires continuous 360° rotation while maintaining an...
− +
I2C 16x2 Character LCD w/RGB Backlight
$18.95  
1 pc(s)
This is another great 16x2 character LCD display with I2C interface designed for 3.3V and 5V supply. The LCD features full colour RGB background, allowing you to change the background colour to meet your project requirement. The LCD uses I2C communication interface - only four wires...
− +
I2C 16x2 Character LCD w/RGB Text
$18.95  
4 pc(s)
This is another great 16x2 character LCD display with I2C interface designed for 3.3V and 5V supply. The LCD features full colour RGB text, allowing you to change the text colour to meet your project requirement. The LCD uses I2C communication interface - only four wires (power,...
− +
Slip Ring - 6 Wire (2A)
$18.95  
5 pc(s)
This is a 6 wire slip ring, a remarkably simple electromechanical assembly that allows electronic signals to be passed through its rotating innards. Commonly, you'd find slip rings in wind turbines, radar antennae, or anything else that requires continuous 360° rotation while maintaining an...
− +
-50%
Solar Panel - 18V 2.5W
$18.75 $37.50  
2 pc(s)
Need a clean energy source to power you project? Check out this high quality, high output solar panel. Each panel features high efficient polycrystalline cells mounted onto a fibreglass PCB and covered with epoxy resin which protect the cells without reducing efficiency. A weatherproof plastic...
− +
4WD Double Decker Robot Chassis Kit
$18.50  
1 pc(s)
This 4WD Double Decker Robot Chassis Kit is easy to assemble and use robot chassis platform. It provides you with everything you need to give your robot a fast four wheel drive platform with plenty of room for expansion to add various sensors and controllers (such as Arduino). All you need...
− +
3.3V Step-Up/Step-Down Voltage Regulator S7V8F3
$18.50  
6 pc(s)
The Pololu step-up/step-down voltage regulator S7V8F3 is a switching regulator (also called a switched-mode power supply (SMPS) or DC-to-DC converter) that uses a buck-boost topology. It takes an input voltage from 2.7 V to 11.8 V and increases or decreases the voltage to a fixed 3.3 V output...
− +
DRV8833 Dual Motor Driver Carrier
$18.00  
3 pc(s)
This tiny breakout board for TI’s DRV8833 dual motor driver can deliver 1.2 A per channel continuously (2 A peak) to a pair of DC motors. With an operating voltage range from 2.7 to 10.8 V and built-in protection against reverse-voltage, under-voltage, over-current, and...
− +
HC-05 Master / Slave Bluetooth Module
$18.00  
3 pc(s)
The HC-05 is a class 2 Bluetooth module designed for transparent wireless serial communication. It is pre-configured as a slave Bluetooth device. Once it is paired to a master Bluetooth device such as PC, smart phones and tablet, its operation becomes transparent to the user. All data...
− +
I2C 20x4 Character LCD Module - Black on Green 5V
$17.95  
8 pc(s)
This is another great 20x4 character LCD display with I2C interface. As the pin resources of Arduino controller is limited, your project may be not able to use standard LCD module after connected with a certain quantity of sensors or SD card. However, with this I2C interface LCD module, you...
− +
T-Slot Nuts For MakerBeamXL (50pcs)
$17.50  
8 pc(s)
The MakerBeamXL T-slot nut is made of stainless steel and was specially designed to slide into the T-slot grooves of the MakerBeamXL profile. The T-slot nut is great to fasten brackets or corner cubes.
− +
Robotic Claw - MKII
$17.50  
1 pc(s)
This robotic claw is a step up from the classic. The MKII takes everything you loved about the standard robot claw from DAGU and makes some significant improvements! Just like the classic claw, they are made from metal and are pretty heavy-duty, but the MKII also features brass sleeves...
− +
Mini Submersible Liquid Pump Kit
$16.95  
3 pc(s)
Looking for a liquid pump for your plant watering project? This Mini Submersible Liquid Pump Kit comes with a miniature pump with driver board and battery pack for 2xAA battery. The driver board is designed to operate between 3V to 5VDC supply. It works with PWM input, so you can increase or...
− +
Sharp Infrared Distance Sensor GP2Y0A02YK - 20 to 150cm
$16.80  
5 pc(s)
This popular sensor made by Sharp produces an analog output that varies from 2.5V at 20cm to 0.4V at 150cm. The sensor has a Japanese Solderless Terminal (JST) Connector. You can purchase a pre-made cable with connector that mates with this sensor. See 3-pin Cable for Sharp Sensors...
− +
HC-06 Bluetooth Module
$16.80  
3 pc(s)
The HC-06 is a class 2 slave Bluetooth module designed for transparent wireless serial communication. Once it is paired to a master Bluetooth device such as PC, smart phones and tablet, its operation becomes transparent to the user. All data received through the serial input is immediately...
− +
-50%
ubit:connect Interfacing Board for BBC micro:bit - Assembled
$16.75 $33.50  
116 pc(s)
This ubit:connect Interfacing Board is specially designed for BBC micro:bit developer. It offers an easy way to connect sensors, actuators and other circuits to the micro:bit. The board comes with an 0.91" OLED display. Together with SGBotic's customised makecode package, this OLED display...
− +
Polymer Lithium Ion Battery - 1000mAh 3.7V With JST PH Connector
$16.70  
9 pc(s)
**This battery is not available to ship outside Singapore** This is a very small, extremely lightweight battery based on Lithium Ion chemistry, with the highest energy density currently in production. Each cell outputs a nominal 3.7V at 400mAh! Comes terminated with a standard 2-pin...
− +
M5Stack Module - Mini GPS
$16.50  
1 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack Mini GPS Module is built around the AT6558 GNSS module. The 56-channel 6 positioning engine boasts a Time-To-First-Fix (TTFF) of...
− +
micro:bit EduFun Mini Project Kit - DS18B20 Waterproof Temperature Sensor
$16.00  
2 pc(s)
SGBotic has created a series of micro:bit EduFun Mini Project Kits with an aim of making advance devices available to micro:bit inventors. Much efforts have been devoted to designing the MakCode blocks package to remove the complexity of using these devices, making it easier for inventors to...
− +
Micro HDMI to HDMI Cable - 3 meter
$15.99  
12 pc(s)
Connect an HDMI device with a micro HDMI port to one with a regular size HDMI port together with this basic HDMI cable. It has nice molded grips for easy installation, and is 3 meter long. Dimensions: 3 meter Long
− +
I2C 16x2 Character LCD Module - 5V
$15.95  
10 pc(s)
This is another great 16x2 character LCD display with I2C interface. As the pin resources of Arduino controller is limited, your project may be not able to use standard LCD module after connected with a certain quantity of sensors or SD card. However, with this I2C interface LCD module, you...
− +
I2C 16x2 Character LCD (Black on Grey) - 3.3V
$15.95  
6 pc(s)
This is another great 16x2 character LCD display with I2C interface designed for 3.3V supply. As the pin resources of the Arduino or Raspberry Pi is limited, your project may be not able to use standard LCD module after connected with a certain quantity of sensors or SD card. However, with...
− +
I2C 16x2 Character LCD (White on Blue) - 3.3V
$15.95  
1 pc(s)
This is another great 16x2 character LCD display with I2C interface designed for 3.3V supply. As the pin resources of the Arduino or Raspberry Pi is limited, your project may be not able to use standard LCD module after connected with a certain quantity of sensors or SD card. However, with...
− +
ESP32 Development Board Lite
$15.95  
4 pc(s)
The ESP32 Development Board Lite is a compact version of standard ESP32 development board. Like other ESP32 boards, it has a 32-bit dual core microcontroller that combines Wi-Fi and Bluetooth to support a wide range of applications that require wireless and internet connectivity. This...
− +
LiPo Charger Basic - Micro-USB
$15.95  
Out-of-stock
If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The LiPo Charger Basic is stripped down of all features and just does one thing well - charge 3.7V LiPo cells at a rate of 500mA per hour. It is designed to charge single-cell Li-Ion or Li-Polymer...
Out-of-stock
I2C 20x4 Character LCD Module - 3.3V
$15.95  
3 pc(s)
This is another great 20x4 character LCD display with I2C interface that runs at 3.3V. As the pin resources of Arduino or Raspberry Pi controller is limited, your project may be not able to use standard LCD module after connected with a certain quantity of sensors or SD card. However, with...
− +
-7%
RS232 Shifter SMD Without DB9
$15.75 $17.00  
5 pc(s)
The smallest and easiest to use serial conversion circuit on the market! This board has one purpose in life - to convert RS232 to TTL and vice versa (TX and RX). This will allow a microcontroller to communicate with a computer. Shifter SMD is powered from the target application and can run at...
− +
-50%
SparkFun gator:bit
$15.50 $31.00  
4 pc(s)
The SparkFun gator:bit is an all-in-one "carrier" board for your micro:bit that provides you with a fully functional development and prototyping platform. Almost every pin on the micro:bit is broken out to pads that alligator (or crocodile, if you prefer) clips so you can get the most out of...
− +
T-Bracket For MakerBeamXL (12 pcs)
$15.50  
10 pc(s)
The stainless steel T-bracket is a great addition to MakerBeamXL product range. It is compatible with both threaded and non-threaded MakerBeam. Includes 12x Stainless steel T-Bracket for MakerBeamXL
− +
Force Sensitive Resistor - Square (FSR406) - Male Pin Header
$15.50  
4 pc(s)
This is a force sensitive resistor with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be...
− +
2.4GHz Duck Antenna RP-SMA - Large
$15.50  
3 pc(s)
Need range? 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. This antenna mates nicely with the Reverse Polarized SMA Connector. Documents: Datasheet Dimensions: 0.5x7.7"
− +
Mecanum Wheels For TT Gear Motor - 80mm Diameter (PAIR)
$15.50  
1 pc(s)
Mecanum wheels allow your robot to not only travel forward and backward, but also sideways! Nine rollers set on a 45° rotational axis parallel to the main rotational axis of the wheel enable a broad a range of movement. Rotating all four wheels in the same direction causes forward or backward...
− +
1 2 3 4 5 6 7 8 9 10
4 - 13

Recently Viewed