Delivery fee

New items

1 2 3 4 5 6 7 8 9
3 - 13
Newest Items First
63 Per Page
-10%
SparkFun Thing Plus - Artemis
$30.15 $33.50  
1 pc(s)
If you are looking for a board that (almost) does it all, look no further! The SparkFun Artemis Thing Plus takes the popular Thing Plus footprint and adds in the powerful Artemis module for ultimate functionality. Fully compatible with SparkFun's Arduino core, the modern USB-C connector makes...
− +
Copper Tape - 10mm (20 Meters)
$5.99  
9 pc(s)
Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder, like the stained glass on Tiffany lamps. This copper tape is...
− +
Copper Tape - Conductive Adhesive, 10mm (20 Meters)
$6.90  
Out-of-stock
Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder, like the stained glass on Tiffany lamps. This copper tape is backed by a...
Out-of-stock
-20%
Raspberry Pi Zero Mini Camera - 120 Degree 60mm
$32.00 $40.00  
2 pc(s)
This teeny-weeny Camera Board is the perfect companion to the popular Raspberry Pi Zero! The sensor is 5MP, and the components are mounted on the flexible circuit board. As such, a little care is needed when handling, just like the connector on the Pi Zero. It's a great camera in a tiny...
− +
-20%
Raspberry Pi Zero Mini Camera - 160 Degree 60mm
$36.00 $45.00  
5 pc(s)
This teeny-weeny Camera Board is the perfect companion to the popular Raspberry Pi Zero! The sensor is 5MP, and the components are mounted on the flexible circuit board. As such, a little care is needed when handling, just like the connector on the Pi Zero. It's a great camera in a tiny...
− +
-20%
Raspberry Pi Zero Mini Camera - 72 Degree 150mm
$36.00 $45.00  
5 pc(s)
This teeny-weeny Camera Board is the perfect companion to the popular Raspberry Pi Zero! The sensor is 5MP, and the components are mounted on the flexible circuit board. As such, a little care is needed when handling, just like the connector on the Pi Zero. It's a great camera in a tiny...
− +
Qwiic Cable - Male Jumper (200mm)
$2.10  
15 pc(s)
This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a Qwiic connector to a breadboard or an Arduino-based device's pins. The 28AWG wire's length is...
− +
Flex Cable for Raspberry Pi Camera - 1 Meter
$5.50  
2 pc(s)
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 1 Meter long. Each order comes with one cable, Pi...
− +
Miniature Capacitive Fingerprint Sensor
$39.95  
1 pc(s)
Secure your project with biometrics - this all-in-one Capacitive Fingerprint Sensor will make adding fingerprint detection and verification super simple. Similar to the capacitive touchscreen, this captive fingerprint sensor measures your finger by using human conductivity, creating an...
− +
ESP32 Development Board Lite
$15.95  
4 pc(s)
The ESP32 Development Board Lite is a compact version of standard ESP32 development board. Like other ESP32 boards, it has a 32-bit dual core microcontroller that combines Wi-Fi and Bluetooth to support a wide range of applications that require wireless and internet connectivity. This...
− +
8-channel Bi-directional Logic Level Converter - TXS0108
$3.20  
1 pc(s)
If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The 8-channel Bi-directional Logic Level Converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V...
− +
Graphic LCD 96x68 - HX1230
$5.90  
5 pc(s)
The HX1230 LCD is a basic graphic LCD screen originally intended for as a cell phone screen. It uses the HX1230 controller. The HX1230 is a low power CMOS LCD controller/driver, designed to drive a graphic display of 68 rows and 96 columns. The HX1230 requires four I/O pins for interfacing and...
− +
STM8 & STM32 Emulator and Programmer (Assorted Colors)
$9.99  
2 pc(s)
This low cost, easy to use USB Emulator and Programmer supports ST's range of STM8 and STM32 microcontrollers .The programmer will work with software that is compatible with the ST-Link V2 programmer, including Arduino IDE and ST's STM32CubeProg . This programmer is also ideal for use...
− +
STM32F411CEU6 Black Pill Development Board
$28.50  
5 pc(s)
STM32F411CEU6 Black Pill Development Board is an updated version of the popular STM32 Blue Pill. This newer version features a more powerful Core-M4 based ARM CPU running at 100 MHz. It has numerous enhanced features including a 512KB flash, 128KB SRAM memory, a Floating Point Unit, and more...
− +
W25Q64JVSSIQ SPI Flash - 64MBit (8MByte)
$1.95  
13 pc(s)
The W25Q64JV (64M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power. They are ideal for storing voice, text and data. The device operates on 2.7V to 3.6V power supply with current consumption as low as 1µA for power-down. The W25Q64JV array...
− +
ESP8266 WiFi Module Breakout Board - Assembled
$2.95  
2 pc(s)
This ESP8266 WiFi Module Breakout Board allows you to take the dual row header of the ESP-01 and make it breadboard friendly. This board is fully assembled. NOTE : ESP8266 WiFi Module not included.
− +
-33%
8 x AA Battery Holder - Cube End-to-End
$1.00 $1.50  
17 pc(s)
Battery holder for eight AA batteries with ~140mm leads, cube end-to-end configuration.
− +
WS2812 Diffused RGB LED, PTH 5mm
$1.00  
27 pc(s)
We know this looks like a lot of our other LEDs, but it's not! This is a PTH Addressable RGB LED with a WS2812 control IC built right into the LED. This PTH version is incredibly similar to its SMD cousin, except it is breadboard friendly and a lot simpler to solder into your project and is...
− +
8x8 SPI Dot Matrix Display Module - MAX7219 - Green
$3.90  
1 pc(s)
This 8x8 SPI Dot Matrix Module allows you to experiment with dot matrix LED's without all the complicated wiring. The module makes use of the MAX7219 LED driver which handles all the complicated stuff such as multiplexing the LEDs and driving them at the correct currents. What's more, the...
− +
HC-SR04 Ultrasonic Sensor - I2C
$7.95  
15 pc(s)
This is the latest version of the popular HC-SR04 Low Cost Ultrasonic Sensor. Instead of the common GPIO interface, this version of HC-SR04 uses I2C to communicate with host controller. HC-SR04 ultrasonic sensor provides a very low-cost and easy method of distance measurement. It...
− +
Vibration Motor Module
$3.25  
16 pc(s)
This small vibratory motor module is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. The on-board MOSFET driver allows the module to interface directly to microcontroller. Features : Operating voltage:...
− +
USB Type-C Cable with Switch - 1.5 meter
$4.95  
16 pc(s)
This USB to Type-C Cable with switch is 1.5 meter long and is the perfect hard on/off power switch for your Raspberry Pi 4 or any devices that has a Type-C port. Note : The data lines are not connected, so it's mostly just good for powering and charging devices. Dimensions:...
− +
1047_2B - PhidgetEncoder HighSpeed 4-Input
$178.00  
Out-of-stock
The PhidgetEncoder Highspeed 4-Input interfaces with any 5V quadrature encoder. A quadrature encoder is the most commonly used feedback device for a DC or stepper motor. With an encoder, you can keep track of how far your motor has turned, which then allows you to control the position and...
Out-of-stock
EE Component Pack #1
$29.50  
1 pc(s)
This is a custom made component kit for the following NUS Executive Education program: Architecting IoT Solutions Design Intelligent Edge Computing The kit includes: 1x Breadboard Medium Self-Adhesive, 830 tie-in points 1x 40-Pin Rainbow Wire, 20cm - M/F...
− +
Mini MP3 Module
$5.95  
5 pc(s)
The Mini MP3 Module is a small, low-cost mp3 module with a simplified audio output that can be connected directly to a speaker or an earphone jack. The module can be used as a stand-alone module with attached battery, speaker, and push buttons or used in combination with a microcontroller or...
− +
Infrared Remote Control Kit
$1.90  
6 pc(s)
Have you ever needed a cheap way to activate something from across the room? Infrared remotes are still the cheapest way to wirelessly control a device. The IR remote in this kit offers buttons for four directions, select and basic number keys. It is ideal for implementing an IR remote control...
− +
YDLIDAR X4 360° Laser Scanner - 10 Meters
$155.00  
Out-of-stock
IMPORTANT: This version (X4), with maximum laser power of 5mW, is a class 3a laser apparatus and does not require license to possess or use. The YDLIDAR X4 360° Laser Scanner is the low cost 360 degree two-dimensional LiDAR. This product can perform 360 degree scan within 10-meter...
Out-of-stock
-50%
Wheel Encoder Kit
$9.95 $19.95  
10 pc(s)
The simple encoder kit from consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensors terminated with 150mm (6inch) cable and 3 pin female servo headers. The magnets have 4 north poles and 4 south poles and are strong enough that the sensor can detect the poles from...
− +
Mecanum Wheels For TT Gear Motor - 80mm Diameter (PAIR)
$15.50  
1 pc(s)
Mecanum wheels allow your robot to not only travel forward and backward, but also sideways! Nine rollers set on a 45° rotational axis parallel to the main rotational axis of the wheel enable a broad a range of movement. Rotating all four wheels in the same direction causes forward or backward...
− +
Serial Wifi Module (Support MQTT) - 3V
$14.90  
1 pc(s)
The Serial To WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The onboard ESP-12F ESP8266 module is capable of either hosting an application or offloading all Wi-Fi networking functions from another...
− +
Diaphragm Liquid Pump (6V to 12VDC)
$4.50  
10 pc(s)
Looking for a battery powered liquid pump? This non-submersible diaphragm liquid pump will operates between DC 6V to 12V. You can PWM the motor to speed up or slow down the flow rate. Works great with motor driver or a simple relay. Each diaphragm liquid pump comes with a pair of...
− +
NPN Transistors - 2N2222A
$0.50  
30 pc(s)
2N2222A is designed for high speed switching application at collector current up to 600mA, and feature useful current gain over a wide range of collector current, low leakage currents and low saturation voltage.
− +
Assembled Pi T-Expansion Kit for Raspberry Pi (w/Color-Coded Ribbon Cable)
$13.50  
11 pc(s)
This Pi T-Expansion Kit comes with a small board that connects to the 40-pin GPIO connector on the Raspberry Pi B+ and Pi2 /3 /3+, and breaks the pins out to breadboard-friendly arrangement and spacing. The Kit comes with a 40 pin ribbon cable, and an already soldered T-Expansion as shown....
− +
Slip Ring - 12 Wire (2A)
$18.95  
1 pc(s)
This is a 12 wire slip ring, a remarkably simple electromechanical assembly that allows electronic signals to be passed through its rotating innards. Commonly, you'd find slip rings in wind turbines, radar antennae, or anything else that requires continuous 360° rotation while maintaining an...
− +
4WD Double Decker Robot Chassis Kit
$18.50  
1 pc(s)
This 4WD Double Decker Robot Chassis Kit is easy to assemble and use robot chassis platform. It provides you with everything you need to give your robot a fast four wheel drive platform with plenty of room for expansion to add various sensors and controllers (such as Arduino). All you need...
− +
-20%
5" Resistive Touchscreen LCD For Pi 4
$60.40 $75.50  
12 pc(s)
The Raspberry Pi Display Module Kit is designed to provide a quick and easy interface to Raspberry Pi without any wiring hassles. It features a fully assembled 5 inches 800x480 high resolution LCD display with resistive touchscreen and a HDMI adapter, engineered specifically to let you...
− +
-20%
7" Capacitive Touchscreen LCD - 1024x600 + 16GB microSD Card For Pi 4
$95.00 $118.75  
5 pc(s)
This 7" high resolution LCD display is designed to provide a quick and easy interface to Raspberry Pi 2 / Pi 3 / Pi 4 and other mini PC such as BeagleBone Black, Banana Pi and PC running on Windows 7/8/10. It features a fully assembled 7" 1024x600 IPS high resolution LCD screen with...
− +
SparkFun OpenScale
$50.50  
4 pc(s)
The SparkFun OpenScale is a simple-to-use, open source solution for measuring weight and temperature. It has the ability to read multiple types of load cells and offers a simple-to-use serial menu to configure calibration value, sample rate, time stamp and units of precision. Simply...
− +
ACHS-7124 Current Sensor Carrier -40A to +40A
$9.95  
1 pc(s)
This board is a simple carrier of Broadcom's bidirectional ±40A ACHS-7124 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. This version accepts a bidirectional current input with a magnitude up to 40A and...
− +
ACHS-7123 Current Sensor Carrier -30A to +30A
$9.95  
2 pc(s)
This board is a simple carrier of Broadcom's bidirectional ± 30A ACHS-7123 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. This version accepts a bidirectional current input with a magnitude up to 20 A...
− +
Pololu Dual MC33926 Motor Driver for Raspberry Pi
$98.00  
3 pc(s)
This motor driver board is an add-on for a compatible Raspberry Pi (Model B+ or newer), including the Pi 3 Model B+ and Model A+, that lets it easily control a pair of bidirectional, brushed DC motors. The expansion board uses a pair of Freescale MC33926 motor drivers, which operate from 5 to 28...
− +
Pololu Dual G2 High-Power Motor Driver 24v14 for Raspberry Pi
$112.00  
1 pc(s)
These G2 dual high-power motor drivers are add-on boards for the Raspberry Pi, featuring pairs of discrete MOSFET H-bridges which operate from 5 to 36 V and can deliver a continuous 14A per channel without a heat sink. The drivers offer basic current limiting functionality, and they accept...
− +
Raspberry Pi GPIO Tall Header w/Extended Pins- 2x20
$4.80  
33 pc(s)
This extra-tall stackable 40-pin female header features two rows of 20 pins spaced with a 0.1″ (2.54 mm) pitch. It includes three 0.1″-thick spacers for additional clearance, and the extended pins allow multiple units to be stacked together. The 2×20 size is notably used on the Raspberry Pi...
− +
Dual MAX14870 Motor Driver for Raspberry Pi
$42.00  
4 pc(s)
This motor driver expansion board and its corresponding Python library make it easy to control a pair of bidirectional, brushed DC motors with a compatible Raspberry Pi (Model B+ or newer), including the Pi 3 Model B+ and Model A+. The expansion board features two MAX14870 H-bridge motor...
− +
VL6180X ToF Distance Sensor Carrier with Voltage Regulator, 60cm Max
$18.95  
2 pc(s)
This sensor is a carrier/breakout board for ST's VL6180X proximity and ambient light sensor, which measures the range to a target object up to 20 cm away (or 60 cm with reduced resolution ). The VL6180X uses time-of-flight measurements of infrared pulses for ranging, allowing it to give...
− +
Mini Servo / ESC Tester
$4.50  
1 pc(s)
The Mini Servo / ESC Tester allow the user to test and exercise servos and set up a mode without requiring the use of a transmitter and receiver. It is easy to use and can test most servo technical parameters. It allows the user to control a servo directly to determine its neutral position...
− +
Rotary Potentiometer Breakout - 10k Ohm
$1.95  
7 pc(s)
An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC, GND, and the OUT pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the OUT pin to an ADC on a microcontroller and get a...
− +
Soldering Iron Stand
$9.90  
3 pc(s)
This is a simple soldering iron stand with heavy base for excellent stability. A cleaning sponge is included. Note: Not compatible with TOL-01027
− +
-50%
3 x AAA Battery Holder
$0.50 $1.00  
50 pc(s)
Battery holder for three AAA batteries, terminated with ~150mm leads
− +
-40%
USB 2.0 Cable A To Type-C - 1.5 meter
$2.95 $4.95  
403 pc(s)
The USB cable with type-C connector is perfect for USB to serial applications and for direct connection to basic microcontrollers (such as the SAMD21 or other with USB built-in). Supporting USB 2.0 speeds and charging up to 3A, this 1.5 meter cable is perfect for embedded enthusiast that need...
− +
-30%
Relay SPDT Sealed - 3V
$0.95 $1.35  
61 pc(s)
These are general purpose, Single Pole - Double Throw (SPDT) sealed relays. Use them to switch high voltage, and/or high current devices. This relay's coil has switch voltage of 3V at 120mA. The contacts are rated 10A at 120VAC, 10A at 30VDC. Features : 3V DC SPDT...
− +
-22%
3-Blade Propeller - 50mm Diameter
$0.35 $0.45  
37 pc(s)
Small 3 blade propeller, 50mm in diameter. It push fits directly onto our toy DC motor . Dimensions : Ø50 x 11.6mm Center bore：1.9 mm
− +
VL53L0X Time-of-Flight Distance Sensor Carrier with Voltage Regulator, 200cm Max
$22.50  
5 pc(s)
The VL53L0X from ST Microelectronics is a time-of-flight ranging system integrated into a compact module. This board is a carrier for the VL53L0X, so we recommend careful reading of the VL53L0X datasheet (1MB pdf) before using this product. The VL53L0 uses ST's FlightSense...
− +
ESP8266 WiFi Module Programmer - USB Interface
$7.90  
6 pc(s)
This module is a USB programmer for ESP8266 Wifi Module . The module is hard wired to automatically enter into download mode once the programmer is plugged into the USB port, there is no need to press any button on the programmer or wifi module. It is very convenient for users to download...
− +
RoboPad Base contacts, 90mm wide, 100A (RPBAS90-100)
Contact us for details

 
 
RoboteQ 's RoboPads charging contact system offers a precision, high current charging solution for mobile robots and Automated Guided Vehicles (AGV). It is composed of a charge contacts base that is typically affixed on the floor, and a collector unit with extendable contacts, mounted on the...
1 x 120A 60V Brushed DC Motor Controller (MDC1460)
Contact us for details

 
 
Roboteq 's MDC1460 controllers are designed to convert commands received from an RC radio, Analog Joystick, wireless modem, PC (via RS232) or microcomputer into high voltage and high current output for driving one DC motor. Using CAN bus, up to 127 controllers can be networked on a single...
2 x 60A 60V Brushed DC Motor Controller (MDC2460)
Contact us for details

 
 
Roboteq 's MDC2460 controller is designed to convert commands received from an RC radio, Analog Joystick, wireless modem, PC (via RS232 or USB) or microcomputer into high voltage and high current output for driving one or two DC motors. Designed for maximal ease-of-use, it is delivered with...
3 x 60A 60V Brushed DC Motor Controller (FDC3260T)
Contact us for details

 
 
Roboteq 's FDC3260 is a feature-packed, high-current, triple channel controller for brushed DC motors. The controller features a high-performance 32-bit microcomputer and quadrature encoder inputs to perform advanced motion control algorithms. The motors may be operated in open or closed...
3 x 60A 60V Brushed DC Motor Controller w/Ethernet (FDC3260TE)
Contact us for details

 
 
Roboteq 's FDC3260 is a feature-packed, high-current, triple channel controller for brushed DC motors. The controller features a high-performance 32-bit microcomputer and quadrature encoder inputs to perform advanced motion control algorithms. The motors may be operated in open or closed...
Photo Interrupter Module (Straight)
$2.50  
6 pc(s)
This Photo Interrupter Module is widely used in motor speed detection, pulse count, the position limit, etc. It will trigger a signal when light between the sensor's gap is blocked. It works with 3.3V to 5VDC, and gives a HIGH on DO pin when the beam is blocked, and a LOW output when...
− +
Photo Interrupter Module (T-Shape)
$2.50  
5 pc(s)
This Photo Interrupter Module is widely used in motor speed detection, pulse count, the position limit, etc. It will trigger a signal when light between the sensor's gap is blocked. It works with 3.3V to 5VDC, and gives a HIGH on DO pin when the beam is blocked, and a LOW output when...
− +
Adjustable Infrared Reflection Sensor (3- 80cm)
$12.50  
14 pc(s)
This is a simple to use infra-read sensor switch. Power it up with 5V and it can detects object within 3 to 80cm. It is widely used in mobile robot for obstacle detection, interactive media, industrial assembly line and many other applications. The detection distance can be adjusted...
− +
Low Current DC Toy Motor w/ Male Lead Wire
$2.20  
10 pc(s)
This is a small toy DC motor with a small circular shaft which measures about 9.4mm long. The motor has an operating voltage range of 1.5 to 4.5VDC and a no load speed of 7,500 RPM. It has very low no-load current of 0.09A at 3.0VDC. The motor is pre-soldered with ~200mm male pin lead...
− +
1 2 3 4 5 6 7 8 9
3 - 13

Recently Viewed