Delivery fee

New items

1 2 3 4 5 6 7 8
2 - 9
Sort by Price: Low to High
96 Per Page
1 x 120A 60V Brushless DC Motor Controller (MBL1660A)
Contact us for details

 
 
Roboteq 's MBL1660A is a feature-packed, medium-current single channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motors' 3 windings in order to generate smooth continuous rotation. The...
2 x 75A 60V Brushless DC Motor Controller (HBL2360A)
Contact us for details

 
 
Roboteq 's HBL2360A is a high-current, dual channel controller for hall-sensor equipped Brushless DC motors. The controller uses the position information from the sensors to sequence power on the motors' 3 windings in order to generate smooth continuous rotation. The controller also uses...
AGV Kit AGV089A03 Without Break (48V Gear Motor)
Contact us for details

 
 
AGV089A03 AGV kit includes two 89mm 48V Frame Motor, Gearbox, and Wheel Assembly for 600kg Mobile Robot up to 3000 RPM, without brake, and FBL2360T motor controller . The motors and controllers are matched and guaranteed to operate safely under any load or overload condition. Functional...
2 x 30A 60V Brushless DC Motor Controller (SBL2360T)
[Contact us for a price]  
Out-of-stock
Roboteq 's SBL2360T is a features-packed, high-current, dual or single channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motor's 3 windings in order to generate smooth continuous...
Out-of-stock
2 x 20A 60V Brushed DC Motor Controller (SDC2160)
Contact us for details

 
 
Fitting into a very compact 73x73mm enclosure, Roboteq's SDC2160 controller is designed to convert commands received from an RC radio, Analog Joystick, wireless modem, PC (via RS232 or USB) or microcomputer into high voltage and high current output for driving one or two DC motors. A CAN bus...
1 x 120A 60V Brushed DC Motor Controller (MDC1460)
Contact us for details

 
 
Roboteq 's MDC1460 controllers are designed to convert commands received from an RC radio, Analog Joystick, wireless modem, PC (via RS232) or microcomputer into high voltage and high current output for driving one DC motor. Using CAN bus, up to 127 controllers can be networked on a single...
40V, 100A Management System for 6 to 10 Cells Lithium Ion Batteries w/BlueTooth (BMS1040ABT)
Contact us for details

 
 
RoboteQ 's BMS1040ABT is a battery management and protection system for building cost-effective, ultra-efficient and high current power sources using Lithium battery cells. The BMS connects to an array of battery cells at one end, and to a user load at the other. BMS1040ABT is...
2 x 60A 60V Brushless DC Motor Controller (FBL2360T)
Contact us for details

 
 
Roboteq 'sFBL2360T is a features-packed, high-current, dual or single channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motor's 3 windings in order to generate smooth continuous...
AGV Kit AGV089A03E with Ethernet (48V Gear Motor without Break)
Contact us for details

 
 
AGV089A03E AGV kit includes two 89mm 48V Frame Motor, Gearbox, and Wheel Assembly for 600kg Mobile Robot up to 3000 RPM, without brake, and FBL2360TE motor controller with Ethernet . The motors and controllers are matched and guaranteed to operate safely under any load or overload...
1 x 60A 60V Brushless DC Motor Controller (SBL2360TS)
Contact us for details

 
 
Roboteq 's SBL2360TS is a features-packed, high-current, dual or single channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motor's 3 windings in order to generate smooth continuous...
1 x 40A 60V Brushed DC Motor Controller (SDC2160S))
Contact us for details

 
 
Fitting into a very compact 73x73mm enclosure, Roboteq's SDC2160S controller is designed to convert commands received from an RC radio, Analog Joystick, wireless modem, PC (via RS232 or USB) or microcomputer into high voltage and high current output for driving one or two DC motors. A CAN bus...
2 x 60A 60V Brushed DC Motor Controller (MDC2460)
Contact us for details

 
 
Roboteq 's MDC2460 controller is designed to convert commands received from an RC radio, Analog Joystick, wireless modem, PC (via RS232 or USB) or microcomputer into high voltage and high current output for driving one or two DC motors. Designed for maximal ease-of-use, it is delivered with...
75V, 100A Management System for 11 to 15 Cells Lithium Ion Batteries (BMS1060A)
Contact us for details

 
 
RoboteQ 's BMS1060A is a battery management and protection system for building cost-effective, ultra-efficient and high current power sources using Lithium battery cells. The BMS connects to an array of battery cells at one end, and to a user load at the other. BMS1060A is optimised...
1 x 120A 60V Brushless DC Motor Controller (FBL2360TS)
Contact us for details

 
 
Roboteq 's FBL2360TS is a features-packed, high-current, dual or single channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motor's 3 windings in order to generate smooth continuous...
2 x 30A 60V Brushless DC Motor Controller (SBLM2360T)
Contact us for details

 
 
Roboteq 's SBLM2360T is a features-packed, high-current, dual or single channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motor's 3 windings in order to generate smooth continuous...
3 x 20A 60V Brushed DC Motor Controller (SDC3260T))
Contact us for details

 
 
Roboteq's SDC3260T is a feature-packed, high-current, triple channel controller for brushed DC motors. The controller features a high-performance 32-bit microcomputer and quadrature encoder inputs to perform advanced motion control algorithms. The motors can be operated in open or closed loop...
3 x 60A 60V Brushed DC Motor Controller (FDC3260T)
Contact us for details

 
 
Roboteq 's FDC3260 is a feature-packed, high-current, triple channel controller for brushed DC motors. The controller features a high-performance 32-bit microcomputer and quadrature encoder inputs to perform advanced motion control algorithms. The motors may be operated in open or closed...
60V, 100A Management System for 11 to 15 Cells Lithium Ion Batteries (BMS1060ABT)
Contact us for details

 
 
RoboteQ 's BMS1060ABT is a battery management and protection system for building cost-effective, ultra-efficient and high current power sources using Lithium battery cells. The BMS connects to an array of battery cells at one end, and to a user load at the other. BMS1060ABT is...
2 x 60A 60V Brushless DC Motor Controller w/Ethernet (FBL2360TE)
Contact us for details

 
 
Roboteq 's FBL2360TE is a features-packed, high-current, dual or single channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motor's 3 windings in order to generate smooth continuous...
1 x 60A 60V Brushless DC Motor Controller (SBLM2360TS)
Contact us for details

 
 
Roboteq 's SBLM2360TS is a features-packed, high-current, dual or single channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motor's 3 windings in order to generate smooth continuous...
AGV Kit AGV089A04 with Break (48V Gear Motor)
Contact us for details

 
 
AGV089A04 AGV kit includes two 89mm Frame Motor, Gearbox and Wheel Assembly for 600kg Mobile Robot, with brake, and FBL2360T motor controller. The motors and controllers are matched and guaranteed to operate safely under any load or overload condition. Functional Safety is ensured via...
3 x 60A 60V Brushed DC Motor Controller w/Ethernet (FDC3260TE)
Contact us for details

 
 
Roboteq 's FDC3260 is a feature-packed, high-current, triple channel controller for brushed DC motors. The controller features a high-performance 32-bit microcomputer and quadrature encoder inputs to perform advanced motion control algorithms. The motors may be operated in open or closed...
All-Metal, Shock-Resistant 160mm Wide Magnetic Track Sensor (MGSW1600)
Contact us for details

 
 
The MGSW1600 is a heavy duty sensor capable of detecting and reporting the position of a magnetic field along its horizontal axis. The sensor is intended for line following robotic applications, using a magnetic tape to form a track guide on the floor. The MGSW1600 is built into a rugged,...
1 x 120A 60V Brushless DC Motor Controller w/Ethernet (FBL2360TES)
Contact us for details

 
 
Roboteq 's FBL2360TES is a features-packed, high-current, dual or single channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motor's 3 windings in order to generate smooth continuous...
Dynamic Shunt Regulator (SR5K100V25R)
Contact us for details

 
 
The SR5K Shunt Regulator is a protection subsystem for dissipating the regenerative energy when braking or drastically reducing the speed of electric motors. During braking, the regenerative voltage can equal to or even exceed the supply voltage in some cases depending on the rotational inertia...
1 x 120A 60V Brushless DC Motor Controller (KBL1660)
Contact us for details

 
 
Roboteq 's KBL1660 is a rugged, feature-packed, high-current single channel controller for brushless DC motors. Built in a water and dirt resistant enclosure, the controller can operate in one of several modes in order to sense the rotor position and sequence power on the motor's 3 windings...
AGV Kit AGV089A04E with Break and Ethernet (48V Gear Motor)
Contact us for details

 
 
AGV089A04 AGV kit includes two 89mm Frame Motor, Gearbox and Wheel Assembly for 600kg Mobile Robot, with brake, and FBL2360TE motor controller with Ethernet. The motors and controllers are matched and guaranteed to operate safely under any load or overload condition. Functional Safety is...
1 x 30A 60V Brushless DC Motor Controller (SBL1360)
Contact us for details

 
 
Roboteq 's SBL1360 is a high-current controller for hall-sensor equipped Brushless DC motors. The controller uses the position information from the sensors to sequence power on the motor's three windings in order to generate smooth continuous rotation. The controller also uses the Hall...
2 x 40A 120V Brushless DC Motor Controller (HBL23120A)
Contact us for details

 
 
Roboteq 's HBL23120A is a high-current, dual channel controller for hall-sensor equipped Brushless DC motors. The controller uses the position information from the sensors to sequence power on the motors' 3 windings in order to generate smooth continuous rotation. The controller also uses...
RoboPad Kit (RPKIT90-100)
[Contact us for a price]  
Out-of-stock
RoboteQ 's RoboPads charging contact system offers a precision, high current charging solution for mobile robots and Automated Guided Vehicles (AGV). It is composed of a charge contacts base that is typically affixed on the floor, and a collector unit with extendable contacts, mounted on the...
Out-of-stock
1 x 120A 60V Brushless DC Motor Controller (MBL1660)
Contact us for details

 
 
Roboteq 's MBL1660 is a feature-packed, medium-current single channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motors' 3 windings in order to generate smooth continuous rotation. The...
AGV Kit AGV089A02 with Break (24V Gear Motor)
Contact us for details

 
 
AGV089A02 AGV kit includes two 89mm 24V Frame Motor, Gearbox, and Wheel Assembly for 600kg Mobile Robot up to 3000 RPM, with brake, and FBL2360T motor controller. The motors and controllers are matched and guaranteed to operate safely under any load or overload condition. Functional...
40V, 100A Management System for 6 to 10 Cells Lithium Ion Batteries (BMS1040A)
Contact us for details

 
 
RoboteQ 's BMS1040A is a battery management and protection system for building cost-effective, ultra-efficient and high current power sources using Lithium battery cells. The BMS connects to an array of battery cells at one end, and to a user load at the other. BMS1040A is optimised...
1 x 30A 60V Brushless DC Motor Controller w/FOC (SBL1360A)
Contact us for details

 
 
Roboteq's SBL1360A is a high-current controller for hall-sensor equipped Brushless DC motors. The controller uses the position information from the sensors to sequence power on the motor's three windings in order to generate smooth continuous rotation. The controller also uses the Hall sensor...
1 x 150A 60V Brushless DC Motor Controller (HBL1660)
Contact us for details

 
 
Roboteq 's HBL1660 is a high-current, dual channel controller for hall-sensor equipped Brushless DC motors. The controller uses the position information from the sensors to sequence power on the motors' 3 windings in order to generate smooth continuous rotation. The controller also uses...
RoboPad Base contacts, 90mm wide, 100A (RPBAS90-100)
Contact us for details

 
 
RoboteQ 's RoboPads charging contact system offers a precision, high current charging solution for mobile robots and Automated Guided Vehicles (AGV). It is composed of a charge contacts base that is typically affixed on the floor, and a collector unit with extendable contacts, mounted on the...
-50%
Shaft - Solid 2mm Diameter x 60mm
$0.10 $0.20  
12 pc(s)
These 60mm long steel shafts have a diameter of 2mm. These shafts are solid, which makes them an ideal choice for axles. They fit on the following wheel and pulley: Wheel: RBT-02709 RBT-02711 RBT-02713 Pulley: RBT-02714 RBT-02715...
− +
-50%
Shaft - Solid 2mm Diameter x 40mm
$0.10 $0.20  
30 pc(s)
These 40mm long steel shafts have a diameter of 2mm. These shafts are solid, which makes them an ideal choice for axles. They fit on the following wheel and pulley: Wheel: RBT-02709 RBT-02711 RBT-02713 Pulley: RBT-02714 RBT-02715...
− +
M12 (S-Mount) Plastic Lock Ring
$0.10  
117 pc(s)
M12x0.5mm Plastic Lock Ring for securing M12 Lenses on lens holders.
− +
-50%
Shaft - Solid 2mm Diameter x 80mm
$0.10 $0.20  
19 pc(s)
These 80mm long steel shafts have a diameter of 2mm. These shafts are solid, which makes them an ideal choice for axles. They fit on the following wheel and pulley: Wheel: RBT-02709 RBT-02711 RBT-02713 Pulley: RBT-02714 RBT-02715...
− +
-50%
Shaft - Solid 2mm Diameter x 75mm
$0.10 $0.20  
2 pc(s)
These 75mm long steel shafts have a diameter of 2mm. These shafts are solid, which makes them an ideal choice for axles. They fit on the following wheel and pulley: Wheel: RBT-02709 RBT-02711 RBT-02713 Pulley: RBT-02714 RBT-02715...
− +
-50%
Shaft - Solid 2mm Diameter x 100mm
$0.10 $0.20  
12 pc(s)
These 100mm long steel shafts have a diameter of 2mm. These shafts are solid, which makes them an ideal choice for axles. They fit on the following wheel and pulley: Wheel: RBT-02709 RBT-02711 RBT-02713 Pulley: RBT-02714 RBT-02715...
− +
-50%
Shaft - Solid 2mm Diameter x 90mm
$0.10 $0.20  
33 pc(s)
These 90mm long steel shafts have a diameter of 2mm. These shafts are solid, which makes them an ideal choice for axles. They fit on the following wheel and pulley: Wheel: RBT-02709 RBT-02711 RBT-02713 Pulley: RBT-02714 RBT-02715...
− +
-50%
Shaft - Solid 2mm Diameter x 110mm
$0.10 $0.20  
5 pc(s)
These 110mm long steel shafts have a diameter of 2mm. These shafts are solid, which makes them an ideal choice for axles. They fit on the following wheel and pulley: Wheel: RBT-02709 RBT-02711 RBT-02713 Pulley: RBT-02714 RBT-02715...
− +
-50%
Mini Push Button Switch
$0.10 $0.20  
1043 pc(s)
Miniature Single Pole Single Throw switches. These are high quality momentary on switches. Perfect as a tactile reset switch. Mounts directly into standard bread boards. Rated up to 50mA. Documents : Datasheet (TSS-TC-0104)
− +
-50%
Shaft - Solid 2mm Diameter x 20mm
$0.10 $0.20  
33 pc(s)
These 20mm long steel shafts have a diameter of 2mm. These shafts are solid, which makes them an ideal choice for axles. They fit on the following wheel and pulley: Wheel: RBT-02709 RBT-02711 RBT-02713 Pulley: RBT-02714 RBT-02715...
− +
-50%
Shaft - Solid 2mm Diameter x 30mm
$0.10 $0.20  
14 pc(s)
These 30mm long steel shafts have a diameter of 2mm. These shafts are solid, which makes them an ideal choice for axles. They fit on the following wheel and pulley: Wheel: RBT-02709 RBT-02711 RBT-02713 Pulley: RBT-02714 RBT-02715...
− +
-50%
Pulley For Toy Motorr - 17mm Diameter
$0.15 $0.30  
8 pc(s)
This plastic pulley can be used to drive wheels or other pulleys with 2mm diameter belt. They have an outer diameter of 17mm and is designed to fit the 2mm shafts and the output shaft on our DC toy motor . Wheel body: ø17 x 4mm
− +
-50%
Pulley For Toy Motor and TT Motor - 30mm Diameter
$0.15 $0.30  
45 pc(s)
This plastic pulley can be used to drive wheels or other pulleys with 2mm diameter belt. They have an outer diameter of 30mm and is designed to fit the 2mm shafts and the output shaft on our DC toy motor . It also has a slot for fitting onto our TT motor and comes with a mounting screw for...
− +
-50%
Pulley For Toy Motor and TT Motor - 36mm Diameter
$0.15 $0.30  
46 pc(s)
This plastic pulley can be used to drive wheels or other pulleys with 2mm diameter belt. They have an outer diameter of 36mm and is designed to fit the 2mm shafts and the output shaft on our DC toy motor . It also has a slot for fitting onto our TT motor and comes with a mounting screw for...
− +
-51%
Momentary Push Button Switch - 12mm Square
$0.17 $0.35  
230 pc(s)
This is a standard 12mm square momentary button. What we really like is the large button head and good tactile feel (it 'clicks' really well). This button is great for user input on a PCB or a good, big reset button on a breadboard. Breadboard friendly!
− +
Diode Rectifier - 1A 50V
$0.20  
772 pc(s)
This is a simple, very common rectifier diode. Often used for reverse voltage protection, the 1N4001 is a staple for many power, DC to DC step up, and breadboard projects. 1N4001 is rated for up to 1A/400V. Documents: Datasheet
− +
Capacitor Ceramic 22pF
$0.20  
500 pc(s)
This is a very common 22pF capacitor. Used with crystals for loading purposes. 0.2" spaced leads make this a perfect candidate for breadboarding and perf boarding. Rated at 50V.
− +
MicroSD Card Adapter
$0.20  
33 pc(s)
The micro SD card adapter looks like a regular-sized SD card with a slot in it for the microSD card. It allows you to transfer data between your device and a computer.
− +
Toy DC Motor Bracket - Metal
$0.20  
9 pc(s)
This compact metal bracket enables convenient mounting of our popular Toy DC Motors . ‎Ø2mm mounting holes. Note: Toy DC motor not included.
− +
-33%
Jumper Cap - 2 Pin (Pack of 5)
$0.30 $0.45  
249 pc(s)
These are two pin jumper caps (also called shunts) that will create an electrical connection between two pin headers. Commonly used to modify settings on a board or device.
− +
DIP Switch - 2 Position
$0.35  
42 pc(s)
DIP switch with 2 individual switch positions. The pins have 2.54mm spacing - fits great into a breadboard! Works great as general control switches.
− +
-22%
3-Blade Propeller - 50mm Diameter
$0.35 $0.45  
37 pc(s)
Small 3 blade propeller, 50mm in diameter. It push fits directly onto our toy DC motor . Dimensions : Ø50 x 11.6mm Center bore：1.9 mm
− +
DIP Switch - 3 Position
$0.40  
17 pc(s)
DIP switch with 3 individual switch positions. The pins have 2.54mm spacing - fits great into a breadboard! Works great as general control switches.
− +
Wheel For Toy Motor and TT Motor - 44mm Diameter
$0.45  
4 pc(s)
This custom-designed plastic wheel has a rubber ring measuring 44mm in diameter and is designed to fit the 2mm shafts and the output shaft on our DC toy motor . It also has a slot for fitting onto our TT motor and comes with a mounting screw for secure attachment. Wheel body: ø44 x 7mm
− +
Wheel For Toy Motor and TT Motor - 32mm Diameter
$0.45  
41 pc(s)
This custom-designed plastic wheel has a rubber ring measuring 32mm in diameter and is designed to fit the 2mm shafts and the output shaft on our DC toy motor . It also has a slot for fitting onto our TT motor and comes with a mounting screw for secure attachment. Wheel body: ø32 x 7mm
− +
DIP Switch - 4 Position
$0.45  
Out-of-stock
DIP switch with 4 individual switch positions. The pins have 2.54mm spacing - fits great into a breadboard! Works great as general control switches.
Out-of-stock
Active Buzzer -12mm Continuous Tone
$0.50  
16 pc(s)
This is a small 12mm round active buzzer. It has additional circuitry in it which makes it easier to use but limits the buzzer to only making one type of a sound (tone). It only requires DC power source for the tone to be generated. This buzzer will switched on by a 3-5V DC voltage. No other...
− +
9V Battery Snap - Standard
$0.50  
94 pc(s)
Classis 9V snap connectors with color-coded wire leads. Great for replacements or projects. Length: ~ 15cm
− +
2-pin Cable With JST BEC Plug
$0.50  
18 pc(s)
Cable with 2-pin JST BEC style plug. The JST plug is commonly used in Lithium Polymer battery. Suitable for low current application. Dimensions: Approx. 30cm
− +
Aluminum Heatsink Self-adhesive - 11mmx11mm
$0.50  
8 pc(s)
This tiny little aluminium heatsink is a perfect solution for cooling off small surface-mount components such as CPUs on Raspberry Pi or stepper motor driver. The heatsink includes thermal adhesive tape for better heat dissipation. The installation is simple, what you need to do is to remove...
− +
NPN Transistors - 2N2222A
$0.50  
30 pc(s)
2N2222A is designed for high speed switching application at collector current up to 600mA, and feature useful current gain over a wide range of collector current, low leakage currents and low saturation voltage.
− +
-50%
3 x AAA Battery Holder
$0.50 $1.00  
50 pc(s)
Battery holder for three AAA batteries, terminated with ~150mm leads
− +
3.5mm Stereo Plug
$0.50  
13 pc(s)
This is a simple 3.5mm stereo audio plug with a screw-on plastic shroud. These are great for projects that plug into headphone jacks. Stereo plugs can also be used for carrying serial comm connections! The outer shell unscrews to reveal solder terminals on the inside of the plug. Solder on your...
− +
Small Wheel For Toy Motor - 28mm Diameter
$0.50  
8 pc(s)
This custom-designed plastic wheel has a rubber ring measuring 28mm in diameter and is designed to fit the 2mm shafts and the output shaft on our DC toy motor . Wheel body: ø28 x 3.8mm
− +
-33%
Panel Mount Pushbutton - Latching (10mm, Red)
$0.50 $0.75  
28 pc(s)
This is the basic panel-mount latching on/off switch. The two switch contacts are either connected or disconnected. When you push the button they will switch from one to the other, like an on-off switch. These buttons are rated up to 1A@250VAC. Overall length (including leads) is 32mm and...
− +
NPN Transistors - 45V 800mA (BC337)
$0.50  
677 pc(s)
This BC337 is a drop-in replacement for the 2N2222 Transistor This is the BC337, an NPN silicon BJT (Bipolar Junction Transistor). This little transistor can help in your project by being used to help drive large loads or amplifying or switching applications. The BC337 is specifically rated...
− +
GPIO Reference Card For Raspberry Pi Model B+/PI 2/PI 3
$0.50  
53 pc(s)
This board makes connecting wires to the Raspberry Pi GPIO incredibly easy. It's a reference board that makes it really easy to see if you're connecting your wires correctly. We've designed the board such that it fits into our Pi enclosure . The board is only 0.8mm thick. Simply slide...
− +
-50%
2mm 10pin XBee Socket
$0.50 $1.00  
100 pc(s)
This is a 10-pin socket with 2mm pitch that mates with the popular XBee radio from Maxstream. Use this small part to avoid having to solder your precious radio to a PCB. You'll need two of these sockets to connect to all 20 pins on the XBee. Sold in single unit.
− +
DC Barrel Power Jack/Connector
$0.50  
6 pc(s)
DC power jack / connector. This is a common barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5.5mm jack, with a 2.1mm center pole diameter.
− +
Panel Mount Pushbutton - Latching (10mm, Green)
$0.50  
35 pc(s)
This is the basic panel-mount latching on/off switch. The two switch contacts are either connected or disconnected. When you push the button they will switch from one to the other, like an on-off switch. These buttons are rated up to 1A@250VAC. Overall length (including leads) is 32mm and...
− +
-38%
28mm Crocodile Clips (10 pcs)
$0.50 $0.80  
43 pc(s)
Pack of 10, 28mm Crocodile Clips. Excellent for fast prototyping where removable connections are essential. Features two side notches at the back of the clip for securing to leads and wires. Available as a pack of 10 clips. These miniature crocodile clips are perfect to use with...
− +
Potentiometer Knob
$0.50  
10 pc(s)
This is a great looking rubberized knob for the potentiometer. Slides onto the Single Turn Potentiometer and holds tightly with a strong friction fit.
− +
DC Barrel Jack Plug - Male
$0.50  
52 pc(s)
This barrel jack plug is great for adding a common connector to the end of our wires. This jack is compatible with 5.5mm barrel jacks that have a 2.1mm center pole diameter. The outer shell unscrews to reveal solder terminals and a crimp strain relief. The outer shell has strain relief as well.
− +
2-pin Cable With JST BEC Receptacle
$0.50  
14 pc(s)
Cable with 2-pin JST female BEC style connector. Suitable for low current application. Dimensions: Approx. 30cm
− +
-33%
868 / 915MHz Spring Coil Antenna
$0.50 $0.75  
45 pc(s)
This spring coil antenna is designed for the 868 / 915MHz devices. Each antenna is constructed of copper. Features: Frequency Range(MHz)：868 / 915MHz Gain(dBi)：2 dBi V.S.W.R：≤2 Input Impedance( OHM)：50 Spring outer diameter: 5mm Total length: 16mm...
− +
-33%
Screw Terminals 5mm Pitch (2-Pin)
$0.50 $0.75  
53 pc(s)
Screw Terminals with 5mm pitch pins. Comes in 2 positions and have the really cool feature of slide-locking together to form any size you need (4, 6, up to 20 without problems). Rated up to 300V @ 8A. Terminal can accept 26 to 14AWG wire. 5mm/197mil pin pitch will line up well with standard...
− +
Transistor - NPN, 60V 200mA (2N3904)
$0.50  
111 pc(s)
These are very common, high quality BJT NPN transistors made by ON Semiconductor. Documents : Datasheet
− +
3-Blade Boat Propeller - 27mm Diameter (5 pcs)
$0.50  
7 pc(s)
Small propeller for boat, 3 blades and 27mm in diameter. It push fits directly onto our toy DC motor . Dimensions : Ø27 x 6.9mm Center bore：1.9 mm
− +
DIP Switch - 1 Position
$0.50  
2 pc(s)
A simple 1-position DIP switch - fits great into a breadboard! Works great as general control switches.
− +
-50%
3 x AA Battery Holder
$0.50 $1.00  
84 pc(s)
Battery holder for three AA batteries, terminated with ~150mm leads
− +
Screw Terminals 3.5mm Pitch (2-Pin)
$0.50  
1 pc(s)
Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal can accept 30 to 20AWG wire. 3.5mm/138mil pin pitch will not fit standard...
− +
DC Barrel Jack Plug - Female
$0.50  
39 pc(s)
This female barrel jack plug is great for adding a common connector to the end of wires. This jack is compatible with 5.5x2.1mm barrel connectors. The outer shell unscrews to reveal solder terminals and a crimp strain relief. The outer shell has strain relief as well.
− +
Passive Buzzer - PCB Mount 12mm 2.048kHz
$0.50  
2030 pc(s)
This is a small 12mm round passive buzzer that operates around the audible 2kHz range. We drove it directly from a 3v to 5V Arduino or micro:bit to generate simple melody. Note : This passive buzzer requires a square wave (PWM) signal to make a sound or to play melodies. The frequency...
− +
Transistor - PNP, 60V 200mA (2N3906)
$0.50  
143 pc(s)
These are very common, high quality BJT NPN transistors made by Fairchild Semiconductor. Documents : Datasheet
− +
2-Pin JST Connector Kit
$0.50  
21 pc(s)
2-Pin 2mm pitch JST connector for battery holder or Lithium Polymer battery. Work with Sparkfun's Lipo charger/booster and Lilypad/Fio boards. Includes 2x female crimp pins 1x housing (2mm pitch)
− +
-31%
Panel Mount Toggle Switch - SPDT
$0.55 $0.80  
5 pc(s)
This heavy duty single-pole, double-throw (SPDT) toggle switch makes a great power switch or state selector for user interface. Rated for 6A at 125VAC. Includes a two threaded nuts and washer for mounting.
− +
DIP Switch - 5 Position
$0.60  
22 pc(s)
DIP switch with 5 individual switch positions. The pins have 2.54mm spacing - fits great into a breadboard! Works great as general control switches.
− +
-20%
Panel Mount Pushbutton - Latching (12mm, Red)
$0.60 $0.75  
5 pc(s)
This is the basic SPDT panel-mount latching on/off switch. The two switch contacts are either connected or disconnected. When you push the button they will switch from one to the other, like an on-off switch. These buttons are rated up to 3A@125VAC / 1A@250VAC. Overall length (including...
− +
-33%
Rocker Switch - DPDT
$0.60 $0.90  
34 pc(s)
This switch is about the same size as our right angle rocker switch except that it's double-pole double-throw. It's rated for 10 Amps at 125VAC and can be snap-in panel mounted. Documents : Dimensional Drawings
− +
-33%
Rocker Switch - SPDT Small
$0.60 $0.90  
29 pc(s)
The rocker switch is a classic and this one is a great size for an unobtrusive on/off switch. It can be panel mounted and has two tabs for connecting wire. You can either solder wire or use a quick-connect connector. Features : Maximum Voltage: 250VAC Maximum Current: 3A @...
− +
1 2 3 4 5 6 7 8
2 - 9