Delivery fee

New items

1 2 3 4 5 6 7 8 9
Sort by Price: Low to High
96 Per Page
Wheel for 5V Stepper Motor - 60mm Diameter
$2.95  
4 pc(s)
This wheel is designed specifically for our 5V stepper motor It comes with a rubber tread, and a press-fit design to make connecting super quick and easy. Note: Wheel only. Stepper motor not included. Wheel body: 56 x 8mm
− +
ESP8266 WiFi Module Breakout Board - Assembled
$2.95  
2 pc(s)
This ESP8266 WiFi Module Breakout Board allows you to take the dual row header of the ESP-01 and make it breadboard friendly. This board is fully assembled. NOTE : ESP8266 WiFi Module not included.
− +
Mini 3-Wire Volt Meter (0 - 99.9VDC) - Blue
$2.95  
9 pc(s)
Put a voltage meter anywhere with this very handy display. These are often used by RC hobbyists for keeping track of batteries but we thought it would be great on a breadboard or enclosure. This is the 3-wire version of the volt meter, two wires are used to power it and the third wire is used...
− +
UV 400nm Purple LED Clear Lens - 5mm (10 pcs)
$2.95  
45 pc(s)
These LEDs emit UV 'blacklight' in the UV spectrum so they are great for projects with fluorescent materials referred to as UV/blacklight-reactive or 'glow-in-the dark'. They are bright (350mcd) and have about a 20-degree LED beam. They go easily into a breadboard and come in a pack of ten so...
− +
USB Cable A to Pigtail - 30cm
$2.95  
25 pc(s)
The USB Cable A to Pigtail provides a convenient method for hard wire a USB Type A connecting to a device or terminal block. One end of the cable is fitted with a strain relief USB Type A connector. The other end of the cable has stripped and tinned leads. This cable is commonly used to power...
− +
Mini 3-Wire Volt Meter (0 - 99.9VDC) - Green
$2.95  
3 pc(s)
Put a voltage meter anywhere with this very handy display. These are often used by RC hobbyists for keeping track of batteries but we thought it would be great on a breadboard or enclosure. This is the 3-wire version of the volt meter, two wires are used to power it and the third wire is used...
− +
Breadboard Power Supply 5V/3.3V
$2.95  
5 pc(s)
This Breadboard Power Supply Module plugs directly into a solderless breadboard and provides both 3.3V and 5V power directly to the breadboard power rails. The board accepts 7 to 12V DC input via the barrel jack or 5V via the mini-B USB port. It provides two regulated, fuse protected outputs...
− +
Mini Liquid Pump - Horizontal (2.5V to 5VDC)
$2.95  
Out-of-stock
Looking for a battery powered liquid pump for your Micro:Bit project? This submersible Mini Liquid Pump operates between DC 2.5V to 5V. You can PWM the motor to speed up or slow down the flow rate. Works great with motor driver or a simple relay. This liquid pump does not come with...
Out-of-stock
Solderless Adapter For WS2812 Fexi-Strip
$2.95  
19 pc(s)
This solderless adapter provides a convenient way to connect the WS2812 LED strip to your microcontroller. Although soldering is the best way to maintain a lasting connection, the solderless adapter is a great way to get your project going quickly without the hassle of soldering work. When...
− +
Mini 3-Wire Volt Meter (0 - 99.9VDC) - Red
$2.95  
9 pc(s)
Put a voltage meter anywhere with this very handy display. These are often used by RC hobbyists for keeping track of batteries but we thought it would be great on a breadboard or enclosure. This is the 3-wire version of the volt meter, two wires are used to power it and the third wire is used...
− +
-25%
LilyPad Slide Switch
$2.95 $3.95  
2 pc(s)
This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to...
− +
Medium Breadboard White, 400 Tie-In Points
$2.95  
1 pc(s)
This is your tried and true white solderless breadboard. It has 2 power buses, 30 columns, and 10 rows - a total of 400 tie in points. All pins are spaced by a standard 0.1". The two sets of five rows are separated by about 0.3", perfect for straddling a DIP package over. The board accepts...
− +
Mini 3-Wire Volt Meter (0 - 99.9VDC) - Yellow
$2.95  
7 pc(s)
Put a voltage meter anywhere with this very handy display. These are often used by RC hobbyists for keeping track of batteries but we thought it would be great on a breadboard or enclosure. This is the 3-wire version of the volt meter, two wires are used to power it and the third wire is used...
− +
-40%
USB 2.0 Cable A To Type-C - 1.5 meter
$2.95 $4.95  
403 pc(s)
The USB cable with type-C connector is perfect for USB to serial applications and for direct connection to basic microcontrollers (such as the SAMD21 or other with USB built-in). Supporting USB 2.0 speeds and charging up to 3A, this 1.5 meter cable is perfect for embedded enthusiast that need...
− +
USB Cable A to B - 50cm
$3.00  
Out-of-stock
This is the classic. It's an A to B Male/Male type peripheral cable for printers and other large peripheral devices. Compatible with Arduino Uno and Arduino Mega. Dimensions: 50cm
Out-of-stock
Infrared Receiver Diode (TSOP38238)
$3.00  
33 pc(s)
Use this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package, it mates well with embedded electronics and can be used with common IR remotes. The TSOP38238 is a miniaturized receiver for infrared remote control...
− +
-40%
USB microB Cable - 1.5 meter
$3.00 $5.00  
1158 pc(s)
USB 2.0 type A to micro USB 5-pin. This is a new, smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Micro USB is found on newer hand held devices like cell phones and portable media devices. Connector shape may vary slightly from image as our stock...
− +
-33%
RCA Video Cable - 6'
$3.00 $4.50  
1 pc(s)
RCA cables are super handy for moving analog signals around. This is a great way to connect a composite video capable device, like the Raspberry Pi, to a suitable display. They also come in handy if you want to hook up your old-school analog gaming consoles, you know it's always impossible to...
− +
USB mini-B Cable - 50cm
$3.00  
3 pc(s)
This is the standard A-miniB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your USB Hubs, FTDI Breakout Board and USB Lipo charger w/Mini B connector, among other things. Dimensions: 50cm
− +
USB Extension Cable - 50cm
$3.00  
5 pc(s)
This is a 50cm long USB extension cable equipped with type A male connector on one end to plug into your computer and a type A female connector at the other that allows for a second USB cable to be inserted. This cable is perfect for adding a periphery that utilizes USB without having it...
− +
USB microB Cable - 50cm
$3.00  
Out-of-stock
USB 2.0 type A to micro USB 5-pin. This is a new, smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Micro USB is found on newer hand held devices like cell phones and portable media devices. Connector shape may vary slightly from image as our stock...
Out-of-stock
4 x 18650 Battery Holder
$3.00  
7 pc(s)
Battery holder for four 18650 Lithium Ion batteries, terminated with ~150mm leads
− +
-50%
SOIC to DIP Adapter 28-Pin
$3.15 $6.30  
22 pc(s)
Low-cost basic SOIC break out boards. These are custom PCB boards that interface standard SOIC devices to standard .1" (2.54mm) headers. 28-SOIC: Standard .6" spacing between pins. Will fit directly into a standard width (600 mil) DIP socket. For wide ICs (memories, drivers, 74s,...
− +
-50%
SSOP to DIP Adapter 28-Pin
$3.15 $6.30  
14 pc(s)
8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and can be used with any pin count up to 28 pins. Designed to be used with 0.65mm pitch devices but can also be used with 0.025" pitch devices (comes out to ~0.635mm)....
− +
8-channel Bi-directional Logic Level Converter - TXS0108
$3.20  
1 pc(s)
If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The 8-channel Bi-directional Logic Level Converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V...
− +
Vibration Motor Module
$3.25  
16 pc(s)
This small vibratory motor module is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. The on-board MOSFET driver allows the module to interface directly to microcontroller. Features : Operating voltage:...
− +
-50%
Interface Cable RP-SMA to U.FL
$3.45 $6.95  
4 pc(s)
This connector cable interfaces UFL RF connectors to RP-SMA antennas. Use it to attach any standard RP-SMA 2.4GHz antenna to the DPAC 802.11 modules. Dimensions: 4" Length
− +
HC-SR04 Low Cost Ultrasonic Module (5V Supply)
$3.45  
15 pc(s)
HC-SR04 ultrasonic sensor provides a very low-cost and easy method of distance measurement. This sensor measures distance using sonar. An ultrasonic (well above human hearing) pulse is transmitted from the unit and distance-to-target is determined by measuring the time required for the...
− +
RGB LED Module - 8mm
$3.45  
38 pc(s)
The RGB LED module allows for individual control of red, green, or blue colors all in a single module. Features: 8mm RGB LED 3.3V and 5.0V compatible
− +
40-Pin Rainbow Wire, 20cm - M/F
$3.50  
7 pc(s)
This Rainbow Wire provides a convenient way to connect the signals in your projects. You can always pull the rainbow wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses. The color-coding can be used to organize power, ground and other signal types...
− +
Jumper Wires Premium 12" M/M Pack of 10
$3.50  
2 pc(s)
These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of ten jumpers (colors shown). We use these wires for everything! They work great with...
− +
NVIDIA JetBot Mounting Kit
$3.50  
8 pc(s)
This mounting kit is intended for use with the NVIDIA JetBot robot. It includes the necessary screws and nuts to secure the Jetson Nano, motors, camera, etc., to the 3D printed chassis. Kit includes: 4x M3*25 Phillips pan head machine screw (stainless steel) 4x M3 nuts...
− +
7-Segment Green LED - 0.8" Digit Height
$3.50  
5 pc(s)
Your basic 7-segment LED, Common anode. Digit height is 0.8" (20.4mm). Overall height is 27.7mm. Documents: Datasheet Arduino Library
− +
Jumper Wires Premium 12" F/F Pack of 10
$3.50  
6 pc(s)
These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one package of ten jumpers (colors shown). We use these wires for everything! They work great...
− +
Soil Moisture Sensor
$3.50  
10 pc(s)
This soil moisture sensor can read the amount of moisture present in the soil surrounding it. It's a low tech sensor, but ideal for monitoring an urban garden, or your pet plant's water level. This is a must have tool for a connected garden! This sensor uses the two probes to pass...
− +
Bi-axial Gear Motor (1:94)
$3.50  
1 pc(s)
This bi-axial gear motor offers a cheap and easy-to-use setup to get your project moving. It possess a 80mm long output on a 3mm diameter hexagon axis. This gear motor requires a voltage of 1.5 to 6V with a no load current of 400mA while possessing a gearbox ratio of 1:94 and a wheel...
− +
Translucent Silicone Tubing For Peristaltic Liquid Pump - 1 Meter
$3.50  
19 pc(s)
This soft, flexible tubing is specially sourced for our Peristaltic Liquid Pump . It is made of silicone rubber which is odorless, flexible and resistant to high temperatures. It can be operated under a temperature range of -60 to +200℃. Note : This tubing is sold by per meter in...
− +
Bi-axial Gear Motor (1:143)
$3.50  
4 pc(s)
This bi-axial gear motor offers a cheap and easy-to-use setup to get your project moving. It possess a 80mm long output on a 3mm diameter hexagon axis. This gear motor requires a voltage of 1.5 to 6V with a no load current of 660mA while possessing a gearbox ratio of 1:134 and a wheel...
− +
Mini RGB LED Controller with RF Remote
$3.50  
2 pc(s)
This mini 5-24VDC RGB LED Controller is loaded with functionality and has an RF remote range of up to 30 meters. It can be used to control color effects for common anode style 5-24VDC RGB LED Lights strip. The maximum load is 4 amps per channel, 12 amps total. Functions include 20 static...
− +
Flex Cable for Raspberry Pi Camera - 30cm
$3.50  
11 pc(s)
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 30cm long. Each order comes with one cable, Pi Camera...
− +
4 x AA Battery Holder with Switch & Barrel Jack
$3.50  
8 pc(s)
This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover and an ON/OFF switch which can be used to control power to your project. The cable is terminated with a standard 5.5x2.1mm, center positive barrel jack...
− +
Mega Enclosure - Clear
$3.50  
1 pc(s)
The Arduino Mega 2560 R3 is a very big and powerful microcontroller,needless to say, you want to keep it protected. Why not protect it with one of these snazzy plastic enclosures? These cases protect the Arduino Mega 2560 from things like rogue wires that might short it out while still allowing...
− +
Solder Wick - 1.5m Spool
$3.50  
2 pc(s)
Use this solder wick along with the solder sucker to clean up soldering messes. Wick really comes in handy when soldering or desoldering surface-mount parts.
− +
M5Stack Module - Light
$3.50  
9 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack Light Module uses photo cell to measure light intensity. The resistance of the photo cell depending on the amount of light it is...
− +
40-Pin Rainbow Wire, 20cm - M/M
$3.50  
117 pc(s)
This Rainbow Wire provides a convenient way to connect the signals in your projects. You can always pull the rainbow wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses. The color-coding can be used to organize power, ground and other signal types...
− +
Large Breadboard Self-Adhesive, 830 Tie-In Points
$3.50  
6 pc(s)
This is a medium sized breadboard with 830 tie-points, self-adhesive backing and two power rails on both sides. Dimensions: 165(L) x 54 (W) x 9(H) mm
− +
40-Pin Rainbow Wire, 20cm - F/F
$3.50  
139 pc(s)
This Rainbow Wire provides a convenient way to connect the signals in your projects. You can always pull the rainbow wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses. The color-coding can be used to organize power, ground and other signal types...
− +
Jumper Wires Premium 12" M/F Pack of 10
$3.50  
17 pc(s)
These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of ten jumpers (colors shown). We use these wires for everything! They work...
− +
Type 2 NFC Silicone Adjustable Wristband (NTAG213) - Yellow
$3.50  
1 pc(s)
This is a blank NFC Type 2 silicone wristbands with adjustable fitting - often used for parties/events or identification but also found in other systems where a small proximity card is desired. This wristbands contains a NTAG213 RFID chip with 144 bytes of memory and an antenna, and is...
− +
microSD USB Reader
$3.50  
5 pc(s)
This is an awesome little microSD USB reader. Just slide your microSD card into the inside of the USB connector, then stick this into a USB port and the card's contents will pop up on your computer. Very sneaky - we love it! This little guy is great for pulling data logs off microSD media. This...
− +
MCP3002 - 2-Channel 10-Bit ADC With SPI Interface
$3.50  
39 pc(s)
The MCP3002 has a 10-bit analog to digital converter (ADC) with a simple to use SPI interface. Use this IC if your microcontroller does not have an ADC or have enough ADC lines. A great chip when you need to add additional ADC lines. Features : 2.7V to 5.5V supply 2 Channels...
− +
-20%
RFID Tag 25mm diameter - 125kHz
$3.60 $4.50  
48 pc(s)
RFID is useful for sensing and identifying tagged people and objects for access control, automation, and a whole range of different applications. This basic RFID tag works in the 125kHz RF range and comes with a unique 40-bit ID number. It is not re-programmable (read-only). This tag is...
− +
8 x AA Battery Holder with On/Off Switch and Cover
$3.80  
2 pc(s)
Enclosed battery holder for eight AA batteries. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. It also features a switch that lets you open and close the electrical connection between the batteries and the holder's leads. The leads are...
− +
Thermoelectric Cooler - 40x40mm
$3.90  
3 pc(s)
Thermoelectric coolers (TEC or Peltier) create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore, they can be used to either warm something up or cool something down, depending on which side you use. The Thermal Tape listed below works very...
− +
Transparent Base Kit For Raspberry Pi
$3.90  
16 pc(s)
This is an acrylic base plate that can hold your Raspberry Pi and self-adhesive breadboard. The kit includes screws, washers and other accessories. Dimensions : 150mm x 100mm x 3mm
− +
MakerBeam Square Headed Bolts w/ Hex Hole - M3x25
$3.90  
4 pc(s)
1 bag of approximately 25 M3 bolts, 25mm - especially made for MakerBeam. The 25 mm bolts have a square head for extra tight fixing, and a hex hole in the head. Length: 25mm.
− +
8x8 SPI Dot Matrix Display Module - MAX7219 - Red
$3.90  
7 pc(s)
This 8x8 SPI Dot Matrix Module allows you to experiment with dot matrix LED's without all the complicated wiring. The module makes use of the MAX7219 LED driver which handles all the complicated stuff such as multiplexing the LEDs and driving them at the correct currents. What's more, the...
− +
Mini RGB LED Controller with IR Remote
$3.90  
29 pc(s)
This mini 5-24VDC RGB LED Controller with 24 Button Infrared Remote is a unique RGB LED controller for use with all our 12VDC RGB LED strip. It can be used to control color effects for common anode style 5-24VDC RGB LED Lights strip. Maximum load is 2 amps per channel, 6 amps total. The...
− +
8x8 SPI Dot Matrix Display Module - MAX7219 - Green
$3.90  
1 pc(s)
This 8x8 SPI Dot Matrix Module allows you to experiment with dot matrix LED's without all the complicated wiring. The module makes use of the MAX7219 LED driver which handles all the complicated stuff such as multiplexing the LEDs and driving them at the correct currents. What's more, the...
− +
Vinyl End Caps for MakerBeam 10x10mm Profile (black, 4pcs)
$3.90  
6 pc(s)
End caps for MakerBeam in 10x10mm profile black vinyl. We finally can give our beams little feet. This specially desinged end caps will help to protect your desktop or to prevent your MakerBeam project from slipping away. It also reduces vibrations for your construction. They...
− +
Copper Tape - 5mm (20 Meters)
$3.95  
6 pc(s)
Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder, like the stained glass on Tiffany lamps. This copper tape is...
− +
Savonius Vertical Rotor Blade
$3.95  
4 pc(s)
Savonius Vertical Rotor Blade for your wind energy experiment. It push fits directly onto our toy DC motor . Dimensions : Ø50 x 60mm (assembled) Center bore：1.9 mm
− +
-20%
SOIC to DIP Adapter 8-Pin
$3.95 $4.95  
1 pc(s)
The SparkFun 8-Pin SOIC to DIP Adapter is a small PCB that lets you adapt SOIC packages into a DIP footprint. These tiny boards are useful for modding and upgrading devices that use 8-pin DIP ICs, when the upgraded IC is only available in a SOIC footprint. You can also use these adapters for...
− +
-33%
Vibration Motor 11.6×4.6×4.8mm
$3.95 $5.90  
4 pc(s)
This tiny DC motor produces vibrations by spinning an eccentric shaft at over 10,000 RPM when powered at 3 V. Motors like this are commonly found in cell phones and other devices that use vibration for tactile feedback, and its small size (11.6 × 4.6 × 4.8 mm) and light weight (0.8 g) make it...
− +
Transceiver nRF24L01+ Module with PCB Antenna
$3.95  
7 pc(s)
This module based on Nordic nRF24L01+, a highly integrated, ultra low power (ULP) 2Mbps RF transceiver for the 2.4GHz ISM (Industrial, Scientific and Medical) band. Nordic nRF24L01+ integrates a complete 2.4GHz RF transceiver, RF synthesiser and baseband logic including the Enhanced...
− +
-50%
Capacitor Kit (300 Total)
$3.95 $7.90  
18 pc(s)
Our new capacitor kit comes with 10 each of 30 different capacitance values. All of these capacitors are packed into the zip-lock bags. This kit provides an easy way to build up a catalog of commonly used capacitors in a way that keeps them organised. Includes : Ceramic...
− +
USB Extension Cable - 1 meter
$3.95  
6 pc(s)
This is a 1 meter long USB extension cable equipped with type A male connector on one end to plug into your computer and a type A female connector at the other that allows for a second USB cable to be inserted. This cable is perfect for adding a periphery that utilizes USB without having it...
− +
Flex Cable for Raspberry Pi Camera - 50cm
$3.95  
1 pc(s)
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 50cm long. Each order comes with one cable, Pi Camera...
− +
I2C Adapter
$3.95  
3 pc(s)
This I2C Adapter provides a convenient way to connect the OLED display module and other I2C devices to Jetson Nano or Raspberry Pi. The 3.3V, Ground, SCL and SDA pins are breakout to multiple connectors. A XH2.54 cable is included in the package. NOTE : You can still access the 5V pin on...
− +
HC-SR04 v2 - Low Cost Ultrasonic Sensor (3V to 5V Supply)
$3.95  
1 pc(s)
This product is the second generation of the popular HC-SR04 Low Cost Ultrasonic Sensor. Unlike the first generation HC-SR04 that can only operate between 4.8V to 5V DC, this new version has much wider input voltage range, allow it to work with controller operates on 3.3V. HC-SR04...
− +
Breakout Board for USB miniB
$3.95  
2 pc(s)
This new version now has all 5 pins broken out on the connector. We have no idea what USB device you are hooking up to, but if you need to add a miniUSB/USB miniB connector to your breadboard - here it is. Also good for an un-regulated, non-limited 5V supply up to 100mA.
− +
USB Cable A to B - 1 meter
$3.95  
1 pc(s)
This is the classic. It's an A to B Male/Male type peripheral cable for printers and other large peripheral devices. Compatible with Arduino Uno and Arduino Mega. Dimensions: 1 meter
− +
USB mini-B Cable - 1 meter
$3.95  
7 pc(s)
This is the standard A-miniB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your USB Hubs, FTDI Breakout Board and USB Lipo charger w/Mini B connector, among other things. Dimensions: 1 meter
− +
Raspberry Pi Zero Case
$3.99  
20 pc(s)
The Raspberry Pi Zero Case has been designed to fit both the Pi Zero and the Pi Zero W. These cases consist of several parts and protect the Raspberry Pi Zero from things like rogue wires that might short it out while still allowing full access to the board. Simply snap the RPi into the bottom...
− +
Opto-Isolated Relay Module - 2 Channels (5V)
$3.99  
3 pc(s)
This two channels Relay Module can be used to control the lighting, electrical and other equipments through the digital IO port. The digital input circuit is optically isolated from the relay, so your controller is protected from voltage spikes and surges. The module is controlled with 5V...
− +
-28%
Photo Interrupter GP1A57HRJ00F
$4.00 $5.55  
3 pc(s)
This sensor is composed of an infrared emitter on one upright and a shielded infrared detector on the other. By emitting a beam of infrared light from one upright to the other, the sensor can detect when an object passes between the uprights, breaking the beam. Used for many applications...
− +
MQ-4 Gas Sensor (Natural Gas)
$4.20  
5 pc(s)
This MQ4 Gas Sensor module is useful for gas leakage detection. It is suitable for detectingI Methane, Propane, Butane, and other combustible gas. The sensitivity of the sensor can be adjusted by potentiometer. Features Good sensitivity to wide range of combustible gas High...
− +
PIR Motion Sensor (w/Adjustable delay and Sensitivity)
$4.20  
9 pc(s)
PIR sensors are used to detect motion from pets/humanoids from about 20 feet (~6 meters) away. This one has an adjustable delay before firing (approx 2-4 seconds) and adjustable sensitivity. You can easily reposition the sensor or mount it using the two holes on either side Runs on...
− +
MQ-5 Gas Sensor (LPG, Natural Gas)
$4.20  
3 pc(s)
This MQ5 Gas Sensor module is useful for gas leakage detection. It is suitable for detectingI Methane, Propane, Butane, and other combustible gas. The sensitivity of the sensor can be adjusted by potentiometer. Features High sensitivity to LPG, natural gas Low sensitivity...
− +
MQ-6 Gas Sensor (Propane, Butane and LPG)
$4.20  
3 pc(s)
This MQ6 Gas Sensor module is useful for gas leakage detection. It is suitable for detectingI Propane, Butane and LPG, and other combustible gas. The sensitivity of the sensor can be adjusted by potentiometer. Features Good sensitivity to wide range of combustible gas...
− +
MQ-2 Gas Sensor (LPG, Propane, Hydrogen, Methane)
$4.20  
2 pc(s)
This MQ2 Gas Sensor module is useful for gas leakage detection. It is suitable for detectingI LPG, Propane, Hydrogen, Methane and other combustible steam. The sensitivity of the sensor can be adjusted by potentiometer. Features Good sensitivity to wide range of combustible gas...
− +
ESP8266 WiFi Module Adaptor w/Logic Level Converter
$4.30  
8 pc(s)
This ESP8266 WiFi Module Adapter allows easy interfacing of ESP8266 WiFi Module to Arduino Uno / Mega or any development board running on 5V logic. It features onboard LDO regulator to supply 3V to ESP8266 WiFi Module and logic level converter for both Tx and Rx pins. Note :...
− +
M12 (S-Mount) lens - 6mm
$4.45  
10 pc(s)
M12 Lenses, also referred to as S-Mount Lenses, are compact imaging lenses designed for use with many small format cameras. They are ideal for environments where space is limited. Designed for use in micro sensor board cameras, this low cost 6mm fixed lens with IR Cut Filter provides...
− +
M12 (S-Mount) lens - 3.6mm
$4.45  
11 pc(s)
M12 Lenses, also referred to as S-Mount Lenses, are compact imaging lenses designed for use with many small format cameras. They are ideal for environments where space is limited. Designed for use in micro sensor board cameras, this low cost 3.6mm fixed lens with IR Cut Filter...
− +
-50%
Breakout Board for BBC Micro:bit
$4.45 $8.90  
201 pc(s)
Unlock the potential of BBC Micro:bit with this assembled Breakout Board! This breakout board offers an easy way to connect additional circuits and hardware to the pins on the edge of the BBC micro:bit. It provides access to all of the BBC Micro:bit processor pins allowing a lot more extra...
− +
-50%
T-Expansion Board For Micro:Bit
$4.45 $8.90  
202 pc(s)
This T-Expansion For Micro:Bit is a small board that connects to the BBC micro:bit and breaks out all 19 GPIO, power and ground pin to breadboard-friendly arrangement and spacing. This board has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out...
− +
MQ-135 Gas Sensor For Indoor Air Quality Monitor
$4.50  
2 pc(s)
This is a simple-to-use gas sensor for indoor air quality monitor, suitable for sensing NH3, NOx, alcohol, Benzene, smoke and CO2 in the air. The MQ-135 can detect NH3 and Alcohol gas concentrations anywhere from 10-300ppm and Benzene from 10-1000ppm. This sensor has a high sensitivity and...
− +
MCP3008 - 8-Channel 10-Bit ADC With SPI Interface
$4.50  
5 pc(s)
The MCP3008 has a 8-Channel 10-bit analog to digital converter (ADC) with a simple to use SPI interface. Use this IC if your microcontroller does not have an ADC or have enough ADC lines. A great chip when you need to add additional ADC lines. Features : 2.7V to 5.5V supply...
− +
Metal Bracket for Ø25mm Gearmotor
$4.50  
1 pc(s)
This aluminum gearmotor brackets let you securely mount 25D mm metal gearmotors to your project. Each bracket includes two M3 screws for securing the motor to the bracket.
− +
Large Fan Blade - 170mm Diameter
$4.50  
6 pc(s)
Large fan blade for wind energy project. 170mm in diameter and has 1.9mm center bore for 2mm motor shaft. NOTE: Toy DC motor not included. Dimensions : Ø170 x 10mm Center bore：1.9 mm
− +
Protoboard, Strip, 10x24cm
$4.50  
1 pc(s)
Ideal for development and prototyping work, this protoboard is designed primarily for hard wiring of discrete components, typically in analogue circuits, but is equally useful where a number of common bus or signal lines are required. Size: 10 x 24cm, 1.5mm thick
− +
Audio Cable for BBC micro:bit
$4.50  
20 pc(s)
This is the perfect cable choice for those that want to output music or sound from BBC micro:bit to headphones or speakers. At one end of the cable are the black and red crocodile clips, which connect to the micro:bit GND and Pin 0 respectively. At the other end of the cable is a 3.5mm...
− +
TT Gear Motor - 200RPM
$4.50  
6 pc(s)
These inexpensive and reliable TT Gear Motors are an easy, low-cost way to get your projects moving. These gear motors require a voltage of 3-6VDC with a no load current of less than 150mA at 3V and possess a stall torque of 0.8kg.cm at 6V, a gearbox ratio of 48:1, and it comes with 2 x 200mm...
− +
Mini Servo / ESC Tester
$4.50  
1 pc(s)
The Mini Servo / ESC Tester allow the user to test and exercise servos and set up a mode without requiring the use of a transmitter and receiver. It is easy to use and can test most servo technical parameters. It allows the user to control a servo directly to determine its neutral position...
− +
-55%
3DR Safety Switch for PX4 / Pixhawk
$4.50 $9.90  
60 pc(s)
3D Robotics Safety Switch for PX4 / Pixhawk is a mandatory component of the Pixhawk autopilot system, allowing you to handle your vehicle safety by disabling the motors until you activate the switch. The safety switch features a three-position DF13 connector to connect directly to the...
− +
MQ-7 Gas Sensor (Carbon Monoxide)
$4.50  
2 pc(s)
This is a simple-to-use Carbon Monoxide (CO) sensor, suitable for sensing CO concentrations in the air. The MQ-7 can detect CO-gas concentrations anywhere from 20 to 2000ppm. The sensitivity of the sensor can be adjusted by potentiometer. Features Good sensitivity to Carbon...
− +
1 2 3 4 5 6 7 8 9