Delivery fee

New items

1 2 3 4 5 6 7 8 9 10 11 12
6 - 17
Oldest Items First
48 Per Page
MakerBeam Square Headed Bolts w/ Hex Hole - M3x6
$24.90  
6 pc(s)
1 bag of approximately 250 pcs of stainless steel M3 bolts with square head and hex hole. Length: 6mm.
− +
DIP Switch - 4 Position
$0.45  
Out-of-stock
DIP switch with 4 individual switch positions. The pins have 2.54mm spacing - fits great into a breadboard! Works great as general control switches.
Out-of-stock
25D mm Metal Gearmotor Bracket Pair
$11.00  
1 pc(s)
These aluminum gearmotor brackets let you securely mount Pololu's 25D mm metal gearmotors to your project. The brackets are sold in pairs , and each bracket includes four M3 screws for securing the motor to the bracket. Each bracket also features seven mounting holes and fourteen mounting...
− +
Diffused Green LED - 5mm (10 pcs)
$1.00  
85 pc(s)
LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very basic 5mm LED with a green lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA. Pack of 10 diffused green LEDs....
− +
MakerBeam Square Headed Bolts w/ Hex Hole - M3x12
$15.00  
8 pc(s)
1 bag of approximately 100 M3 bolts, 12mm - especially made for MakerBeam. The 12 mm bolts have a square head for extra tight fixing, and a hex hole in the head. Length: 12mm.
− +
DIP Switch - 5 Position
$0.60  
22 pc(s)
DIP switch with 5 individual switch positions. The pins have 2.54mm spacing - fits great into a breadboard! Works great as general control switches.
− +
Diffused Red LED - 5mm (10 pcs)
$1.00  
9 pc(s)
LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very basic 5mm LED with a green lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA. Pack of 10 diffused red LEDs....
− +
MakerBeam Square Headed Bolts w/ Hex Hole - M3x25
$3.90  
4 pc(s)
1 bag of approximately 25 M3 bolts, 25mm - especially made for MakerBeam. The 25 mm bolts have a square head for extra tight fixing, and a hex hole in the head. Length: 25mm.
− +
Hook-up Wire - Red (22 AWG)
$4.95  
5 pc(s)
Standard 22 AWG solid Red hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.
− +
DRV8825 Stepper Motor Driver Carrier, High Current
$26.95  
7 pc(s)
The DRV8825 stepper motor driver carrier is a breakout board for TI's DRV8825 microstepping bipolar stepper motor driver. This stepper motor driver lets you control one bipolar stepper motor at up to 2.2 A output current per coil (see the Power Dissipation Considerations section...
− +
DIP Switch - 6 Position
$0.60  
36 pc(s)
DIP switch with 6 individual switch positions. The pins have 2.54mm spacing - fits great into a breadboard! Works great as general control switches.
− +
-31%
Push Button 33mm - Pink
$1.80 $2.60  
26 pc(s)
This is a 33mm round momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. Features : Convex Button 35.75 mm Diameter x 46 mm Height M28 thread Mounting Hole Diameter: 27.3 mm Net weight: 0.015kg Rated...
− +
-50%
LilyPad SimpleSnap Protoboard
$6.00 $12.00  
3 pc(s)
The LilyPad SimpleSnap Protoboard is a new, easy way to create e-textiles projects with LilyPad that are modular and can be disassembled or broken down, it's also a great way to prototype! The SimpleSnap Protoboard is made to connect to the SimpleSnap main board so that the board is...
− +
Adafruit NeoPixel 1/4 60 Ring - 5050 RGB LED w/ Integrated Drivers
$19.90  
2 pc(s)
The biggest NeoPixel Ring yet! With four of these you can make a huge ring with 60 ultra bright smart LED NeoPixels are arranged in a circle with a 6.2" diameter. Each order comes with just the quarter ring. Four of this item are required to make a large ring. You will have to solder them...
− +
MakerBeam M3 Wing Type Bolts - 6mm
$15.00  
1 pc(s)
The wing type MakerBeam bolts make it easy to add a bracket midway between brackets already fastened. The rectangular screw head of the wing type bolt gives the possibility to add screws midway. You can insert the screw midway of a beam and turn it to ensure tightening. This way it is easy to...
− +
Hook-up Wire - White (22 AWG)
$4.95  
3 pc(s)
Standard 22 AWG solid White hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.
− +
Robotic Claw - MKII
$17.50  
1 pc(s)
This robotic claw is a step up from the classic. The MKII takes everything you loved about the standard robot claw from DAGU and makes some significant improvements! Just like the classic claw, they are made from metal and are pretty heavy-duty, but the MKII also features brass sleeves...
− +
DIP Switch - 8 Position
$0.65  
26 pc(s)
DIP switch with 8 individual switch positions. The pins have 2.54mm spacing - fits great into a breadboard! Works great as general control switches.
− +
-20%
RedBot - Robotic Development Platform
$39.95 $49.95  
6 pc(s)
The RedBot Mainboard is a robotic development platform that works with the Arduino IDE. The RedBot is a motor driver and Ardiuno combination with various headers and connections, eliminating the need to stack multiple shields. By using the RedBot accessory boards and your own chassis, you...
− +
Copper Tape - 50mm (20 Meters)
$26.95  
5 pc(s)
Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder, like the stained glass on Tiffany lamps. This copper tape is...
− +
Zumo Robot for Arduino v1.2 (Assembled with 75:1 HP Motors)
$189.95  
Out-of-stock
The Zumo robot is a low-profile tracked robot platform intended for use with an Arduino (or compatible device) as its main controller. It measures less than 10 cm on each side and weighs approximately 300 g with an Arduino Uno and batteries (165 g without, as shipped), so it is both small...
Out-of-stock
M3 Nuts
$11.90  
1 pc(s)
1 bag of approximately 250 pcs M3 nuts. Compatible with all MakerBeam bolts
− +
Alligator Test Leads (Pack of 10) - Medium
$5.50  
8 pc(s)
Alligator clips (or Crocodile clips, if you prefer) are likely to be the most useful thing on your workbench besides the workbench itself. Whether you're just trying to make a few quick connections to test your circuit or having trouble making your multimeter leads stay where you need them,...
− +
-20%
PicoBoard
$55.20 $69.00  
1 pc(s)
The PicoBoard allows you to create interactions with various sensors. Using the Scratch programming language, you can easily create simple interactive programs based on the input from sensors. The PicoBoard incorporates a light sensor, sound sensor, a button and a slider, as well as 4...
− +
-31%
Panel Mount Toggle Switch - SPDT
$0.55 $0.80  
5 pc(s)
This heavy duty single-pole, double-throw (SPDT) toggle switch makes a great power switch or state selector for user interface. Rated for 6A at 125VAC. Includes a two threaded nuts and washer for mounting.
− +
-20%
LilyPad LED Pink (5pcs)
$4.75 $5.95  
7 pc(s)
Here is a simple 5 pack of pink LEDs for LilyPad, or whatever else you can dream up. Light up the night! LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting...
− +
Biomedical Sensor Pad (Pack of 10)
$15.00  
Out-of-stock
Note : This product is NOT a medical device and is not intended to be used as such or as an accessory to such nor diagnose or treat any conditions. This is a 10-pack of Biomedical Sensor Pads, disposable electrodes that can be used to measure EEG, ECG and EMG levels. these little pads are...
Out-of-stock
Cap Nuts M3 (50 pcs)
$9.50  
1 pc(s)
Cap nuts come in packages of 50 pieces. They will give your MakerBeam project an extra finish.
− +
2-Pin JST Connector Kit
$0.50  
21 pc(s)
2-Pin 2mm pitch JST connector for battery holder or Lithium Polymer battery. Work with Sparkfun's Lipo charger/booster and Lilypad/Fio boards. Includes 2x female crimp pins 1x housing (2mm pitch)
− +
-29%
Tactile Button Assortment Pack of 12
$6.50 $9.10  
19 pc(s)
These tactile buttons are great for all sorts of projects. This assortment comes with 2 of each of 6 different colors for a total of 12 buttons. The colored caps are removable and the buttons fit into breadboards. See the drawing below for exact dimensions. Documents: Drawing
− +
Heating Pad - 5x10cm
$7.90  
12 pc(s)
These DC powered heating pads are perfect for near-body heating applications. They get warm to the touch but not too hot. Simply apply 5VDC to the wire leads and within minutes, the pad will begin to warm up. These heating pads are constructed using a mesh of Polyester filament and Micro...
− +
Adjustable Infrared Reflection Sensor (3- 50cm)
$12.50  
4 pc(s)
This is a simple to use infra-read sensor switch. Power it up with 5V and it can detects object within 3 to 50cm. It is widely used in mobile robot for obstacle detection, interactive media, industrial assembly line and many other applications. The detection distance can be adjusted from 3-...
− +
Sensor Cable - Electrode Pads (3 connector)
$10.50  
1 pc(s)
Note : This product is  NOT  a medical device and is not intended to be used as such or as an accessory to such nor diagnose or treat any conditions. This is your simple three conductor sensor cable with electrode pad leads. These cables are 24" long and feature a 3.5mm...
− +
MakerBeam M3 Hex Nut Driver
$7.50  
3 pc(s)
This high quality hex nut driver (5,5mm) is a standard item in our MakerBeam Starter Kit. Work with both standard nuts and Cap nuts.
− +
-40%
0.1" (2.54mm) Crimp Connector Housing: 1x40-Pin
$0.60 $1.00  
337 pc(s)
These housings work with our crimp pins to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male and female headers and solderless breadboards . Specifications : Pins: 1 x 40 Spacing: 0.1 in (2.54mm)
− +
Heating Pad - 5x15cm
$8.20  
1 pc(s)
These DC powered heating pads are perfect for near-body heating applications. They get warm to the touch but not too hot. Simply apply 5VDC to the wire leads and within minutes, the pad will begin to warm up. These heating pads are constructed using a mesh of Polyester filament and Micro...
− +
Pololu Dual VNH5019 Motor Driver Shield for Arduino
$126.00  
3 pc(s)
This motor driver shield and its corresponding Arduino library make it easy to control two bidirectional, high-power, brushed DC motors with an Arduino or Arduino clone. The board features a pair of robust VNH5019 motor drivers from ST, which operate from 5.5 to 24 V and can deliver a...
− +
Hook-up Stranded Wire - Red (22 AWG)
$5.30  
2 pc(s)
Standard 22 AWG stranded red wire. Use this for soldering wire or any project in which you need flexible wire. Comes in small spools of 25'.
− +
DIP Switch - 1 Position
$0.50  
2 pc(s)
A simple 1-position DIP switch - fits great into a breadboard! Works great as general control switches.
− +
Mono 2.5W Class D Audio Amplifier - PAM8302
$8.50  
1 pc(s)
This super small mono amplifier is surprisingly powerful - able to deliver up to 2.5 Watts into 4-8 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.0V-5.5VDC. Since the amp is a class D, its very efficient (over 90% efficient when driving an 8Ω...
− +
0.1" (2.54mm) Crimp Connector Housing: 1x1-Pin 25-Pack
$1.00  
2 pc(s)
These housings work with our crimp pins to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male and female headers and solderless breadboards .
− +
Copper Tape - 5mm (20 Meters)
$3.95  
6 pc(s)
Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder, like the stained glass on Tiffany lamps. This copper tape is...
− +
-20%
microSD Shield
$19.60 $24.50  
1 pc(s)
Running out of memory space in your Arduino project? The SparkFun microSD Shield equips your Arduino with mass-storage capability, so you can use it for data-logging or other related projects. Communication with microSD cards is achieved over an SPI interface. The SCK, DI, and DO pins of the...
− +
-20%
Lock-style Solenoid - 12VDC
$10.40 $13.00  
20 pc(s)
Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This makes the solenoid able to pull from one end. This solenoid has a slug...
− +
Active Piezo Buzzer 3-24VDC Pulse Tone
$1.70  
5 pc(s)
Loud sounders that may be powered with a voltage of anywhere from 3.0 to 24VDC. It has additional circuitry in it which makes it easier to use but limits the buzzer to only making one type of a sound (tone). It only requires DC power source for the tone to be generated. This buzzer is...
− +
-50%
3 x AA Battery Holder with Switch and Cover
$1.00 $2.00  
1 pc(s)
Enclosed battery holder for three AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose the cells. It also features a switch that lets you open and close the electrical connection between the batteries and the holder's leads. The leads are...
− +
-33%
Rocker Switch - SPST Medium
$0.60 $0.90  
2 pc(s)
This switch is about the same size as our Rocker Switch -DPDT except that it's single-pole single-throw. It's rated for 6A@250V / 10A@125VAC and can be snap-in panel mounted. Documents : Dimensional Drawings
− +
1 x AA Battery Holder
$0.80  
3 pc(s)
Battery holder for single AA batteries, terminated with ~150mm leads
− +
1 2 3 4 5 6 7 8 9 10 11 12
6 - 17