Delivery fee

New items

1 2 3 4 5 6 7 8 9 10
4 - 17
Sort by Price: High to Low
48 Per Page
-14%
SparkFun RedBoard Artemis
$28.00 $32.50  
1 pc(s)
Think of the SparkFun RedBoard Artemis as just another Arduino....that has BLE, one megabyte of flash, and runs at less than 1mA. And, it can run TensorFlow models too! The RedBoard Artemis takes the incredibly powerful Artemis module from SparkFun and wraps it up in an easy to use and...
− +
-35%
Bare Conductive - Electric Paint (50ml)
$27.95 $43.00  
3 pc(s)
Bare Conductive's Electric Paint is just like any other water-based paint... except that it's electrically conductive! This means that you can actually paint wires onto things like models, clothes, furniture, walls, almost anything you can think of. Standard acrylic or water-based paints can...
− +
-13%
BBC micro:bit v2 Kit w/T-Expansion Board Bundle
$27.95 $32.00  
3 pc(s)
The BBC micro:bit is a pocket-sized computer that lets you get creative with digital technology. You can code, customise and control your micro:bit from anywhere! You can use your micro:bit for all sorts of unique creations, from robots to musical instruments and more. At half the size of...
− +
-20%
IMX219 Camera Module For Pi Cam V2 - 8 MegaPixels, 160° View Angle
$27.60 $34.50  
7 pc(s)
This IMX219 camera module is supplementary for Raspberry Pi official camera to fulfil the demands for wide view angle. It features 8-megapixel 160 degree view angle. If you got a Raspberry Pi Camera Board V2 and require wide view angle, here it is. Note : Follow the instruction in this...
− +
-50%
Bluetooth Module Breakout - Roving Networks (RN-41 v6.15)
$27.50 $55.00  
1 pc(s)
This is a simple breakout for the Roving Networks Bluetooth module. All pertinent pins are broken out and labeled. This new version's headers are unpopulated. Check below for appropriate headers. The module from Roving Networks is powerful, small, and very easy to use. This...
− +
DRV8825 Stepper Motor Driver Carrier, High Current
$26.95  
7 pc(s)
The DRV8825 stepper motor driver carrier is a breakout board for TI's DRV8825 microstepping bipolar stepper motor driver. This stepper motor driver lets you control one bipolar stepper motor at up to 2.2 A output current per coil (see the Power Dissipation Considerations section...
− +
Copper Tape - 50mm (20 Meters)
$26.95  
5 pc(s)
Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder, like the stained glass on Tiffany lamps. This copper tape is...
− +
Wide Angle Ambient Light Sensor - BH1750
$26.70  
6 pc(s)
This Wide Angle Ambient Light Sensor is based on BH1750 - a digital ambient light sensor with a 16 bit AD converter built-in which can directly output a digital value in lux (Lx) over a range of 1 - 65535 lx. This sensor is far more accurate and easier to use as compare to photocell which...
− +
Humidity Sensor - HIH-4030 Breakout
$26.60  
3 pc(s)
This is a breakout board for Honeywell's HIH-4030 humidity sensor. The HIH-4030 measures relative humidity (%RH) and delivers it as an analog output voltage. You can connect the output of the sensor directly to an ADC on a microcontroller; and, thanks to the sensor's near linear voltage...
− +
SparkFun RedBoard Artemis Nano
$26.50  
1 pc(s)
We like to joke the Artemis Nano is a party on the front and business on the back. And that's by design! All the important LEDs, connectors, labels, and buttons are presented on the front for the best user experience with all the supporting circuitry on the rear of the board. The RedBoard...
− +
-20%
XBee Explorer Serial
$26.00 $32.50  
1 pc(s)
This is a simple to use, RS232 to serial base unit for the XBee line. This unit works with all XBee modules including the Series 1 and Series 2, standard and Pro version. Plug the unit into the XBee Explorer, attach a RS232 cable, and you will have direct access to the serial and programming...
− +
-19%
BBC micro:bit v2 Go Kit
$25.95 $32.00  
Out-of-stock
The micro:bit V2.2 board is backwards compatible with other micro:bit boards, ecosystems and accessories. Codes written for the earlier version (v1 and v2) are able to run on this board without any changes. The BBC micro:bit is a pocket-sized computer that lets you get creative with...
Out-of-stock
Arduino Xbee Shield
$25.95  
2 pc(s)
Another unique shield for the Arduino platform! This XBee shield allows the Arduino USB board to establish wireless communication with other devices. Just slip this shield onto two Arduino board and you've got a wireless network. Or you can put the Xbee into command mode and group...
− +
Servo Shield For OpenMV Cam
$25.95  
2 pc(s)
The Servo Shield gives your OpenMV Cam the ability to control up to 8 servos in parallel. It features the PCA9685 Servo Controller which can also do general-purpose PWM. We've got a PCA9685.py script for controlling the chip for general-purpose PWM and a Servo.py script for controlling...
− +
Corner Cube Kit For MakerBeamXL - Black
$25.70  
3 pc(s)
This Corner Cubes can join up to three MakerBeamXL in right angle. Corner Cubes are joined with a beam by the threaded beam ends. Each set contains 12 15mmx15mmx15mm cubes Note : Not compatible with 10mmx10mm MakerBeam.
− +
Corner Cube Kit For MakerBeamXL - Clear
$25.70  
2 pc(s)
This Corner Cubes can join up to three MakerBeamXL in right angle. Corner Cubes are joined with a beam by the threaded beam ends. Each set contains 12 15mmx15mmx15mm cubes Note : Not compatible with 10mmx10mm MakerBeam.
− +
-20%
Jumper Wires Premium 12" F/F Pack (Approx. 100pcs)
$25.60 $32.00  
13 pc(s)
These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Approx. 100 pcs per pack
− +
5V Step-Up/Step-Down Voltage Regulator S7V7F5
$25.50  
4 pc(s)
The Pololu step-up/step-down voltage regulator S7V7F5 is a switching regulator (also called a switched-mode power supply (SMPS) or DC-to-DC converter) that uses a buck-boost topology. It takes an input voltage from 2.7 V to 11.8 V and increases or decreases the voltage to a fixed 5 V output...
− +
-27%
Programming Fixture 8266 - ESP8266
$25.50 $34.95  
6 pc(s)
The Programming Fixture 8266 is an innovative programming / testing tool specially designed for ESP-07 , ESP-07S, ESP-12F and ESP-12S. It provides an efficient way to program and test the ESP8266 module before soldering the module to the board. User just need to place the module on the...
− +
M5Stack Stackable Module - STEPMOTOR
$25.50  
8 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack Stackable STEPMOTOR module is built around three units of DRV8825 stepper motor controllers. It is perfect for any motion project as it can...
− +
FlexiForce Adapter
$25.00  
2 pc(s)
The FlexiForce Adapter makes it easy to interface a Tekscan FlexiForce Force Sensor to your microcontroller or PC. Just use the cable included with the adapter. We even give you a round plastic disc for the sensing pad. The FlexiForce sensor is an ultra-thin and flexible printed...
− +
2.8" TFT Resistive Touch Shield for Arduino w/microSD Socket
$25.00  
1 pc(s)
The 2.8" resistive touch LCD shield is specifically designed for the Arduino Uno and Mega. It features 2.8" screen with 240x320 pixels, and has a resistive touchscreen attached for direct user interaction. The shield is fully assembled, tested and ready to go. No wiring, no soldering! Simply...
− +
micro:bit EduFun Mini Project Kit - LED Matrix Module
$25.00  
Out-of-stock
SGBotic has created a series of micro:bit EduFun Mini Project Kits with an aim of making advance devices available to micro:bit inventors. Much efforts have been devoted to designing the MakeCode block packages to remove the complexity of using these devices, making it easier for inventors to...
Out-of-stock
DC Motor Driver HAT(V1.0) for Raspberry Pi
$24.95  
Out-of-stock
This is a Raspberry Pi DC motor driver board with on-board encoder interface, which can drive 2-way DC motor and DC motor with encoder. It communicates with Raspberry Pi via I2C, easy to configure and drive motors. The DC Motor Driver HAT adopts STM32 micro processor to analyze the command...
Out-of-stock
MakerBeam Square Headed Bolts w/ Hex Hole - M3x6
$24.90  
6 pc(s)
1 bag of approximately 250 pcs of stainless steel M3 bolts with square head and hex hole. Length: 6mm.
− +
MakerBeam Corner Cube Kit - Clear
$24.75  
23 pc(s)
The corner cubes are designed especially for makerbeams with threaded beam ends. The bag contains: 12x Aluminum corner cubes 50x Stainless steel countersunk bolts with flat head (M3 x 6) 1x Allen key Note : Not compatible with non-threaded MakerBeam.
− +
DE-SWADJ Step Down Adjustable Switching Regulator - 10W
$24.50  
2 pc(s)
The DE-SWADJ is the adjustable version of our SW0XX step down voltage regulators. It is designed to be the easiest possible way to add an adjustable voltage source to a new or existing project with all the efficiency benefits of switch-mode power. The DE-SWADJ is pin-compatible with the...
− +
-11%
FTDI Basic Breakout - 3.3V
$23.95 $26.85  
3 pc(s)
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out...
− +
Motor Driver Board v2 for the BBC micro:bit
$23.90  
7 pc(s)
This board provides a simple way to add motor driving capability to a BBC micro:bit. It allows two motors to be driven with full forward, reverse & stop control. It has terminal blocks to connect four input devices and a regulated 3V supply is fed in to the 80 way connector to power the...
− +
SRF02 Low Cost Single Transducer Ultrasonic Range Finder
$23.80  
Out-of-stock
The SRF02 is a single transducer ultrasonic rangefinder in a small footprint PCB. It features both I2C and a Serial interfaces. The serial interface is a standard TTL level UART format at 9600 baud,1 start, 2 stop and no parity bits, and may be connected directly to the serial ports on...
Out-of-stock
BH1750 Ambient Light Sensor Breakout
$23.70  
5 pc(s)
BH1750FVI is an digital Ambient Light Sensor IC for I2C bus interface. This IC is the most suitable to obtain the ambient light data for adjusting LCD and Keypad backlight power of Mobile phone. It is possible to detect wide range at High resolution. Features I2C bus...
− +
ESP32 Development Board U.FL w/Antenna
$23.50  
14 pc(s)
The ESP32 Development Board is a low-footprint, minimal system development board powered by ESP-WROOM-32 module. The ESP-WROOM-32 is a powerful and compact module that combines Wi-Fi and Bluetooth to support a wide range of applications that require wireless and internet connectivity. This...
− +
-6%
RS232 Shifter SMD
$23.00 $24.50  
2 pc(s)
The smallest and easiest to use serial conversion circuit on the market! This board has one purpose in life - to convert RS232 to TTL and vice versa (TX and RX). This will allow a microcontroller to communicate with a computer. Shifter SMD is powered from the target application and can run at...
− +
RGB and Gesture Sensor - APDS-9960
$23.00  
2 pc(s)
This is the SparkFun RGB and Gesture Sensor, a small breakout board with a built in APDS-9960 sensor that offers ambient light and color measuring, proximity detection, and touchless gesture sensing. With this RGB and Gesture Sensor you will be able to control a computer, microcontroller,...
− +
Opto-Isolated Relay Module - 16 Channels (5V)
$22.99  
1 pc(s)
This 16 channels Relay Module can be used to control the lighting, electrical and other equipments through the digital IO port. The digital input circuit is optically isolated from the relay, so your controller is protected from voltage spikes and surges. The module is controlled with 5V...
− +
-8%
LilyPad Arduino 328 Main Board
$22.95 $24.95  
1 pc(s)
The LilyPad Arduino 328 Main Board is an Arduino-programmed microcontroller designed to be easily integrated into e-textiles and wearable projects. It offers the same functionality you find in other Arduino boards, in a lightweight, round package designed to minimize snagging and profile,...
− +
-40%
Serial Enabled 20x4 LCD - Black on Green 5V
$22.75 $37.85  
1 pc(s)
The serial enabled LCD allows you to control a parallel based LCD over a single-wire serial interface. Included in this product is a black on green 20x4 LCD connected to our serial backpack. The backpack, based around a PIC16F88, takes a TTL serial input and prints the characters it receives...
− +
-50%
SparkFun moto:bit
$22.50 $45.00  
4 pc(s)
The SparkFun moto:bit is a fully loaded "carrier" board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional robotics platform. The moto:bit offers a simple, beginner-friendly robotics controller capable of operating a basic robotics chassis. Onboard...
− +
Ultrasonic Sensor with Waterproof Probe
$22.50  
6 pc(s)
Most ultrasonic distance sensors aren't waterproof which can be a problem if you need your project to withstand the elements outdoors. No need to worry any more! The probe of this sensor is waterproof and is suitable for outdoor applications such as car reversing sensors, security alarms,...
− +
VL53L0X Time-of-Flight Distance Sensor Carrier with Voltage Regulator, 200cm Max
$22.50  
5 pc(s)
The VL53L0X from ST Microelectronics is a time-of-flight ranging system integrated into a compact module. This board is a carrier for the VL53L0X, so we recommend careful reading of the VL53L0X datasheet (1MB pdf) before using this product. The VL53L0 uses ST's FlightSense...
− +
-20%
Jumper Wires Premium 6" F/F Pack (Approx. 100pcs)
$22.40 $28.00  
13 pc(s)
These are 6" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Approx. 100 pcs per pack
− +
MakerBeam Corner Cube Kit - Black
$21.50  
2 pc(s)
The corner cubes are designed especially for makerbeams with threaded beam ends. The bag contains: 12x Aluminum corner cubes 50x Stainless steel countersunk bolts with flat head (M3 x 6) 1x Allen key Note : Not compatible with non-threaded MakerBeam.
− +
micro:bit EduFun Mini Project Kit - Automated Plant Watering System
$21.00  
3 pc(s)
SGBotic has created a series of Micro:Bit EduFun Mini Project Kits with an aim of making advance devices available to micro:bit inventors. Much efforts have been devoted to designing the MakeCode block packages to remove the complexity of using these devices, making it easier for inventors to...
− +
Analog TDS (Total dissolved solids) Sensor Kit
$20.95  
3 pc(s)
This is an Arduino-compatible TDS Sensor Kit for measuring Total dissolved solids value of the water. TDS indicates how many milligrams of soluble solids dissolved in one litre of water. In general, the higher the TDS value, the more soluble solids dissolved in water, and the less clean the...
− +
Low Profile Aluminum Case For Raspberry Pi 4
$19.99  
7 pc(s)
Raspberry Pi is everybody's favorite little computer; the last thing you want is something bad happens to it. Why not protect it with an aluminum case? This elegantly crafted Raspberry Pi 4 case is designed for the perfect combination of durability, affordability, and strength. The case...
− +
SGBotic Micro:bit Robot Board
$19.95  
7 pc(s)
SGBotic Micro:bit Robot Board is designed for development of an autonomous obstacle avoidance robot or line following robot using BBC micro:bit . This Robot Board is capable of driving two DC motors. It has a dedicated port for HC-SR04 Ultrasonic Sensor and Line Follower Array . The...
− +
Non-contact Liquid Level Sensor (PNP Output)
$19.95  
2 pc(s)
This non-contact liquid level sensor can be triggered when the liquid level fall below the sensor attached to the outside surface of a non-metal container. Unlike traditional liquid level sensors, it does not need to be immersed into liquid. So, in this way, liquid will not be contaminated...
− +
ESP32 Development Board
$19.95  
2 pc(s)
The ESP32 Development Board is a low-footprint, minimal system development board powered by ESP-WROOM-32 module. The ESP-WROOM-32 is a powerful and compact module that combines Wi-Fi and Bluetooth to support a wide range of applications that require wireless and internet connectivity. This...
− +
1 2 3 4 5 6 7 8 9 10
4 - 17