Delivery fee

New items

1 2 3 4 5 6 7 8 9
3 - 17
Sort by Popularity
48 Per Page
Pan/Tilt Bracket
$9.50  
1 pc(s)
This pan/tilt bracket consists of two brackets and all the hardware you need to attach them to make a pan/tilt mechanism using two servo motors. This pan/tilt bracket works with our small servo motor . Documents: Dimensional Drawing Assembly Guide
− +
LV-MaxSonar-EZ0 - High-Performance Ultrasonic Range Finder
$48.00  
5 pc(s)
The LV-MaxSonar-EZ0 from Maxbotix offers very short to long-range detection and ranging, in an incredibly small package with ultra low power consumption. The LV-MaxSonar-EZ0 detects objects from 0-inches to 254-inches (645 cm) and provides sonar range information from 6-inches(15.24cm)...
− +
DC Barrel Jack Adapter - Female
$2.50  
4 pc(s)
This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive female barrel jack. If you have a power supply with a barrel jack and want to plug it into a breadboard, this might be the simple solution.
− +
-50%
Transceiver nRF2401A with Chip Antenna
$13.25 $26.50  
3 pc(s)
This nRF2401A module has the same minimum interface of 7 pins (all in a .1" spaced connector) as the original nRF2401A module, but the size is reduce by over 60%! These are the nRF2401A 2.4GHz transceiver modules with built in chip antenna designed around the Nordic Semiconductor nRF2401A...
− +
-50%
Transceiver nRF24L01+ Module with Chip Antenna
$15.00 $30.00  
1 pc(s)
This module uses the newest 2.4GHz transceiver from Nordic Semiconductor, the nRF24L01. This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401A and add some extra pipelines, buffers, and an auto-retransmit feature - very nice!...
− +
Jumper Wires Premium 12" M/M Pack of 10
$3.50  
2 pc(s)
These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of ten jumpers (colors shown). We use these wires for everything! They work great with...
− +
Flex Sensor 4.5"
$29.50  
1 pc(s)
A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove . The resistance of the flex sensor changes when the metal pads...
− +
Humidity Sensor - HIH-4030 Breakout
$26.60  
3 pc(s)
This is a breakout board for Honeywell's HIH-4030 humidity sensor. The HIH-4030 measures relative humidity (%RH) and delivers it as an analog output voltage. You can connect the output of the sensor directly to an ADC on a microcontroller; and, thanks to the sensor's near linear voltage...
− +
-30%
SMC04 High-Power Motor Controller w/Feedback
$88.00 $125.00  
1 pc(s)
The SMC04 high-power motor controller with feedback has multiple interface and feedback options that simplify servo control of commonly available DC motors. T he module features three independent interfaces: a serial protocol for microcontroller-based applications, a pulse-width...
− +
Female Crimp Pins for 0.1" Housings 20-Pack
$2.80  
13 pc(s)
These pins can be crimped on 22-28AWG wires and snapped into our crimp connector housings to create custom cables that are compatible with standard 0.1"-pitch headers and solderless breadboards. These female pins are sold in packs of 20.
− +
Super Bright LED - Red 5mm (10 pcs)
$0.95  
6 pc(s)
These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. All lenses are clear. Features: Standard size - T1 3/4 5mm 8,000mcd brightness 2.0V forward drop Forward current 20mA Documents:...
− +
-20%
4 x AA Battery Holder with Barrel Jack
$1.20 $1.50  
36 pc(s)
This is a simple 4 cell AA battery holder. The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector. The connector mates with the barrel jack on the Arduino Uno (among a number of other products) allowing you to easily make your project...
− +
Jumper Wires Premium 12" F/F Pack of 10
$3.50  
6 pc(s)
These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one package of ten jumpers (colors shown). We use these wires for everything! They work great...
− +
5V Step-Up/Step-Down Voltage Regulator S7V7F5
$25.50  
4 pc(s)
The Pololu step-up/step-down voltage regulator S7V7F5 is a switching regulator (also called a switched-mode power supply (SMPS) or DC-to-DC converter) that uses a buck-boost topology. It takes an input voltage from 2.7 V to 11.8 V and increases or decreases the voltage to a fixed 5 V output...
− +
-20%
Small Stepper Motor
$11.60 $14.50  
1 pc(s)
These small steppers are a great way to get things moving, especially when positioning and repeatability is a concern. Features : Stride Angle (degrees) : 7.5 2-Phase Rated Voltage : 12V Rated Current : 400mA 3mm Diameter Drive Shaft...
− +
Solder Lead Free - 15-gram Tube
$5.90  
5 pc(s)
This is you basic tube of unleaded (Pb-free) solder with a 60/40 no clean, water soluble resin core. 0.031" gauge and 15 grams. Mix: 96.5% tin / 3.0% silver / 0.5% copper
− +
Super Bright LED - Blue 5mm (10 pcs)
$0.95  
2 pc(s)
These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. All lenses are clear. Features: Standard size - T1 3/4 5mm 6,000mcd brightness 3.2V forward drop Forward current 20mA Documents:...
− +
4 x AA Battery Holder with Cover and Switch
$2.50  
3 pc(s)
Enclosed battery holder for four AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose the battery. It also features a switch that lets you open and close the electrical connection between the batteries and the holder's leads. The leads are...
− +
FTDI Basic Breakout 3.3/5V
$19.70  
1 pc(s)
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the...
− +
-7%
RF Link Receiver - 4800bps (434MHz)
$8.50 $9.10  
2 pc(s)
These wireless receivers work with our 434MHz transmitters. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link. Since these are only transmitters, they will only work communicating data one-way, you would need two pairs (of...
− +
Mini Breadboard - White
$1.75  
10 pc(s)
This white Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! If you run out of room, no worries, these mini breadboards can be...
− +
-7%
RS232 Shifter SMD Without DB9
$15.75 $17.00  
5 pc(s)
The smallest and easiest to use serial conversion circuit on the market! This board has one purpose in life - to convert RS232 to TTL and vice versa (TX and RX). This will allow a microcontroller to communicate with a computer. Shifter SMD is powered from the target application and can run at...
− +
40-Pin Rainbow Wire, 20cm - F/F
$3.50  
139 pc(s)
This Rainbow Wire provides a convenient way to connect the signals in your projects. You can always pull the rainbow wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses. The color-coding can be used to organize power, ground and other signal types...
− +
RFID Button - 16mm - 125kHz
$6.50  
4 pc(s)
This is a simple, thumbnail-size RFID tag. These tags are great for sensing presence, identification, etc., and they're small, so they can be easily sewn into clothing or inserted into enclosures. Each tag comes with a unique 32-bit ID code and is not reprogrammable. The carrier frequency of...
− +
Flexiforce Pressure Sensor - 1lb
$38.00  
1 pc(s)
This is a piezoresistive force sensor. The harder you press, the lower the sensor's resistance. Pressing hard, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when...
− +
Super Bright LED - Green 5mm (10 pcs)
$0.95  
51 pc(s)
These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. All lenses are clear. Features: Standard size - T1 3/4 5mm 18,000mcd brightness 3.2V forward drop Forward current 20mA Documents:...
− +
HC-SR04 Low Cost Ultrasonic Module (5V Supply)
$3.45  
15 pc(s)
HC-SR04 ultrasonic sensor provides a very low-cost and easy method of distance measurement. This sensor measures distance using sonar. An ultrasonic (well above human hearing) pulse is transmitted from the unit and distance-to-target is determined by measuring the time required for the...
− +
Ultimate GPS Breakout - 66 channel w/10 Hz updates - Version 3
$75.00  
2 pc(s)
The Ultimate GPS Breakout is built around the MTK3339 chipset, a no-nonsense, high-quality GPS module that can track up to 22 satellites on 66 channels, has an excellent high-sensitivity receiver (-165 dB tracking!), and a built in antenna. It can do up to 10 location updates a second for...
− +
-30%
Force Sensitive Resistor - Small (FSR400) - Male Pin Header
$6.30 $9.00  
61 pc(s)
This is a small force sensitive resistor. It has a 0.16" (4 mm) diameter active sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR,...
− +
Basic 20x4 Character LCD - Black on Green 5V
$12.95  
2 pc(s)
This is a basic 20 character by 4 line display. Utilizes the extremely common HD44780 parallel interface chipset ( datasheet ). Interface code is freely available. You will need ~11 general I/O pins to interface to this LCD screen. Includes LED backlight. Dimensions: 3.86 x 2.36 x...
− +
-50%
Interface Cable RP-SMA to U.FL
$3.45 $6.95  
4 pc(s)
This connector cable interfaces UFL RF connectors to RP-SMA antennas. Use it to attach any standard RP-SMA 2.4GHz antenna to the DPAC 802.11 modules. Dimensions: 4" Length
− +
-20%
XBee Explorer Serial
$26.00 $32.50  
1 pc(s)
This is a simple to use, RS232 to serial base unit for the XBee line. This unit works with all XBee modules including the Series 1 and Series 2, standard and Pro version. Plug the unit into the XBee Explorer, attach a RS232 cable, and you will have direct access to the serial and programming...
− +
0.1" (2.54mm) Crimp Connector Housing: 1x1-Pin 25-Pack
$1.00  
2 pc(s)
These housings work with our crimp pins to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male and female headers and solderless breadboards .
− +
FlexiForce Adapter
$25.00  
2 pc(s)
The FlexiForce Adapter makes it easy to interface a Tekscan FlexiForce Force Sensor to your microcontroller or PC. Just use the cable included with the adapter. We even give you a round plastic disc for the sensing pad. The FlexiForce sensor is an ultra-thin and flexible printed...
− +
Barrel Jack Adapter - USB to 5.5mm
$2.95  
2 pc(s)
This is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector, center positive. This cable allows the user to use a USB port on a computer, laptop, or on our cigarette power supply to provide our development boards with 5V. The USB specification limits current...
− +
Needle Nose Pliers
$6.80  
3 pc(s)
Mini Pliers. These are great little pliers! A must have for any hobbyist or electrical engineer. Crucial for inserting devices into bread boards and bending pins. 4" long.
− +
LV-MaxSonar-EZ4 - High-Performance Ultrasonic Range Finder
$48.00  
1 pc(s)
The LV-MaxSonar-EZ4 from Maxbotix offers very short to long-range detection and ranging, in an incredibly small package with ultra low power consumption. The LV-MaxSonar-EZ4 detects objects from 0-inches to 254-inches (6.45-meters) and provides sonar range information from...
− +
-31%
Tilt Sensor
$2.20 $3.20  
12 pc(s)
This basic tilt switch can easily be used to detect orientation. Inside the can are a pair of balls that make contact with the pins when the case is upright. Tilt the case over and the balls don't touch, thus not making a connection. There are numerous uses for these basic sensors,...
− +
Super Bright LED - White 5mm (10 pcs)
$0.95  
54 pc(s)
These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. All lenses are clear. Features: Standard size - T1 3/4 5mm 22,000mcd brightness 3.2V forward drop Forward current 20mA View angle 15 Deg...
− +
-32%
Reed Switch
$2.00 $2.95  
Out-of-stock
This is a small device called a reed switch . When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed, the reeds separate and the switch opens. This makes for a great...
Out-of-stock
BH1750 Ambient Light Sensor Breakout
$23.70  
5 pc(s)
BH1750FVI is an digital Ambient Light Sensor IC for I2C bus interface. This IC is the most suitable to obtain the ambient light data for adjusting LCD and Keypad backlight power of Mobile phone. It is possible to detect wide range at High resolution. Features I2C bus...
− +
Photo Interrupter GP1A57HRJ00F Breakout Board
$2.35  
4 pc(s)
A simple breakout PCB for the GP1A57HR photo interrupter. This PCB has three connections for PWR, GND, and Signal. When the gate is clear, SIG will be high (>4.9V). When the gate is blocked by a finger, writing utensil, food pellet, or anything else - SIG will go low (<0.4V)....
− +
10-pin Arduino Stackable Header
$0.60  
15 pc(s)
This is a 10-pin female header, with extra long legs -- great for stacking R3-compatible Arduino shields. Pins are spaced by 0.1".
− +
DC Barrel Jack Adapter - Male
$2.50  
36 pc(s)
This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack on an Arduino or a development board, this might be the simple solution.
− +
Ultrasonic Range Finder - XL-Maxsonar EZL0 (MB1260)
$88.00  
2 pc(s)
The XL‑MaxSonar‑EZL0 offers the widest and most sensitive beam pattern of any indoor sensor we currently offer. This makes the XL-MaxSonar-EZL0 an excellent choice wherever wide beam detection, reliable people detection, or reliable small obstacle detection are required. In addition to...
− +
Micro Metal Gearmotor 50:1
$19.90  
3 pc(s)
This micro metal gearmotor has a long (0.365" or 9.27 mm), D-shaped metal output shaft that matches the Wheel 42x19mm and Wheel 32x7mm . The brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch), or you can use the mounting bracket or...
− +
-21%
Tweezers - Straight (ESD Safe)
$5.00 $6.30  
1 pc(s)
These are nice, solid curved tweezers. They have a very fine tip which allows you to pick up very small parts with precision. This is a great tool to have if you're working with surface mount components or anything with very small parts. The ESD-safe coating will also help prevent...
− +
2.4GHz Duck Antenna RP-SMA - Large
$15.50  
3 pc(s)
Need range? 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. This antenna mates nicely with the Reverse Polarized SMA Connector. Documents: Datasheet Dimensions: 0.5x7.7"
− +
1 2 3 4 5 6 7 8 9
3 - 17