Delivery fee

New items

1 2 3 4 5 6 7 8 9 10 11 12 13
7 - 21
Newest Items First
24 Per Page
Dynamic Shunt Regulator (SR5K100V25R)
Contact us for details

 
 
The SR5K Shunt Regulator is a protection subsystem for dissipating the regenerative energy when braking or drastically reducing the speed of electric motors. During braking, the regenerative voltage can equal to or even exceed the supply voltage in some cases depending on the rotational inertia...
RoboPad Base contacts, 90mm wide, 100A (RPBAS90-100)
Contact us for details

 
 
RoboteQ 's RoboPads charging contact system offers a precision, high current charging solution for mobile robots and Automated Guided Vehicles (AGV). It is composed of a charge contacts base that is typically affixed on the floor, and a collector unit with extendable contacts, mounted on the...
1 x 120A 60V Brushed DC Motor Controller (MDC1460)
Contact us for details

 
 
Roboteq 's MDC1460 controllers are designed to convert commands received from an RC radio, Analog Joystick, wireless modem, PC (via RS232) or microcomputer into high voltage and high current output for driving one DC motor. Using CAN bus, up to 127 controllers can be networked on a single...
2 x 60A 60V Brushed DC Motor Controller (MDC2460)
Contact us for details

 
 
Roboteq 's MDC2460 controller is designed to convert commands received from an RC radio, Analog Joystick, wireless modem, PC (via RS232 or USB) or microcomputer into high voltage and high current output for driving one or two DC motors. Designed for maximal ease-of-use, it is delivered with...
3 x 60A 60V Brushed DC Motor Controller (FDC3260T)
Contact us for details

 
 
Roboteq 's FDC3260 is a feature-packed, high-current, triple channel controller for brushed DC motors. The controller features a high-performance 32-bit microcomputer and quadrature encoder inputs to perform advanced motion control algorithms. The motors may be operated in open or closed...
3 x 60A 60V Brushed DC Motor Controller w/Ethernet (FDC3260TE)
Contact us for details

 
 
Roboteq 's FDC3260 is a feature-packed, high-current, triple channel controller for brushed DC motors. The controller features a high-performance 32-bit microcomputer and quadrature encoder inputs to perform advanced motion control algorithms. The motors may be operated in open or closed...
Photo Interrupter Module (Straight)
$2.50  
6 pc(s)
This Photo Interrupter Module is widely used in motor speed detection, pulse count, the position limit, etc. It will trigger a signal when light between the sensor's gap is blocked. It works with 3.3V to 5VDC, and gives a HIGH on DO pin when the beam is blocked, and a LOW output when...
− +
Photo Interrupter Module (T-Shape)
$2.50  
5 pc(s)
This Photo Interrupter Module is widely used in motor speed detection, pulse count, the position limit, etc. It will trigger a signal when light between the sensor's gap is blocked. It works with 3.3V to 5VDC, and gives a HIGH on DO pin when the beam is blocked, and a LOW output when...
− +
RoboPad Kit (RPKIT90-100)
[Contact us for a price]  
Out-of-stock
RoboteQ 's RoboPads charging contact system offers a precision, high current charging solution for mobile robots and Automated Guided Vehicles (AGV). It is composed of a charge contacts base that is typically affixed on the floor, and a collector unit with extendable contacts, mounted on the...
Out-of-stock
-14%
SparkFun RedBoard Artemis
$28.00 $32.50  
1 pc(s)
Think of the SparkFun RedBoard Artemis as just another Arduino....that has BLE, one megabyte of flash, and runs at less than 1mA. And, it can run TensorFlow models too! The RedBoard Artemis takes the incredibly powerful Artemis module from SparkFun and wraps it up in an easy to use and...
− +
SparkFun RedBoard Artemis Nano
$26.50  
1 pc(s)
We like to joke the Artemis Nano is a party on the front and business on the back. And that's by design! All the important LEDs, connectors, labels, and buttons are presented on the front for the best user experience with all the supporting circuitry on the rear of the board. The RedBoard...
− +
ESP8266 WiFi Module Adaptor w/Logic Level Converter
$4.30  
8 pc(s)
This ESP8266 WiFi Module Adapter allows easy interfacing of ESP8266 WiFi Module to Arduino Uno / Mega or any development board running on 5V logic. It features onboard LDO regulator to supply 3V to ESP8266 WiFi Module and logic level converter for both Tx and Rx pins. Note :...
− +
ESP8266 WiFi Module Breakout Board
$2.40  
30 pc(s)
This ESP8266 WiFi Module Breakout Board allows you to take the dual row header of the ESP-01 and make it breadboard friendly. This board comes with the header and decoupling capacitor presoldered, but requires you to solder on the male pins. NOTE : ESP8266 WiFi Module not included.
− +
Grove Universal 4 pin Connector - Straight Through-Hole (10pcs)
$2.15  
48 pc(s)
These 4-Pin straight through-hole 2mm pitch connectors are compatible with SeeedStudio's Grove cable.
− +
Grove Universal 4 pin Connector - Right Angle Through-Hole (10pcs)
$2.15  
44 pc(s)
These 4-Pin right angle through-hole 2mm pitch connectors are compatible with SeeedStudio's Grove cable.
− +
Analog TDS (Total dissolved solids) Sensor Kit
$20.95  
3 pc(s)
This is an Arduino-compatible TDS Sensor Kit for measuring Total dissolved solids value of the water. TDS indicates how many milligrams of soluble solids dissolved in one litre of water. In general, the higher the TDS value, the more soluble solids dissolved in water, and the less clean the...
− +
-33%
868 / 915MHz Spring Coil Antenna
$0.50 $0.75  
45 pc(s)
This spring coil antenna is designed for the 868 / 915MHz devices. Each antenna is constructed of copper. Features: Frequency Range(MHz)：868 / 915MHz Gain(dBi)：2 dBi V.S.W.R：≤2 Input Impedance( OHM)：50 Spring outer diameter: 5mm Total length: 16mm...
− +
VL6180X Time of Flight Distance Sensor - 60cm Max
$9.90  
2 pc(s)
This sensor is a breakout board for ST's VL6180X proximity and ambient light sensor, which measures the range to a target object up to 20 cm away (or 60 cm with reduced resolution). The VL6180X uses time-of-flight measurements of infrared pulses for ranging, allowing it to give accurate results...
− +
USB Micro-B to Type-C Adapter
$1.80  
3 pc(s)
USB Type-C is the latest industry-standard connector for transmitting data and power. This adapter let you attach a USB micro-B cable to a Type-C port. It is suitable for both data transfer and charging.
− +
TT Gear Motor All-Metal Gearbox - 1:90 Gear Ratio
$7.95  
12 pc(s)
These TT All-Metal Gear Motors are a low cost and reliable way to get your projects moving. They look a lot like our yellow all-plastic gear motors but these have all of the motor gears machined from steel, so they won't strip as easily, and they're twice as slow (and twice as powerful) given...
− +
2 x 30A 60V Brushless DC Motor Controller (SBLM2360T)
Contact us for details

 
 
Roboteq 's SBLM2360T is a features-packed, high-current, dual or single channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motor's 3 windings in order to generate smooth continuous...
AGV Kit AGV089A02 with Break (24V Gear Motor)
Contact us for details

 
 
AGV089A02 AGV kit includes two 89mm 24V Frame Motor, Gearbox, and Wheel Assembly for 600kg Mobile Robot up to 3000 RPM, with brake, and FBL2360T motor controller. The motors and controllers are matched and guaranteed to operate safely under any load or overload condition. Functional...
1 x 60A 60V Brushless DC Motor Controller (SBLM2360TS)
Contact us for details

 
 
Roboteq 's SBLM2360TS is a features-packed, high-current, dual or single channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motor's 3 windings in order to generate smooth continuous...
Pi Case for Raspberry Pi 4 - Translucent
$4.99  
12 pc(s)
This translucent enclosure protect the Raspberry Pi 4 from things like rogue wires that might short it out while still allowing access to the ports! Simply snap the Pi 4 into the bottom half of the enclosure, snap the two sides together and then secure with four screws. This...
− +
1 2 3 4 5 6 7 8 9 10 11 12 13
7 - 21