Delivery fee

New items

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
9 - 23
Roboteq 's MBL1660 is a feature-packed, medium-current single channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motors' 3 windings in order to generate smooth continuous rotation. The...

$19.99  
7 pc(s)
Raspberry Pi is everybody's favorite little computer; the last thing you want is something bad happens to it. Why not protect it with an aluminum case? This elegantly crafted Raspberry Pi 4 case is designed for the perfect combination of durability, affordability, and strength. The case...

$14.95  
14 pc(s)
This wifi module is a miniature USB wireless adapter with massive antenna that supports greater range and speed. It is fully complies with wireless 802.11b/g/n standards with data rate up to 300 Mbps when connecting with wireless 802.11n device. This Wifi module works well with the...

$12.00  
11 pc(s)
This KittenBot's IO:bit is a feature packed expansion board for the micro:bit. It breaks out all the IO pins (inputs, outputs) and adds extra hardware to make your next micro:bit project shine. The small form factor and two LEGO-compatible pin holes make it easy to fit into the project you might...

$9.90  
Out-of-stock
This Soil Moisture Sensor is used to measure the moisture in soil and similar materials. The soil moisture sensor is pretty straight forward to use. The two long exposed metal rods function as probes for the sensor, together acting as a variable resistor. The more water that is in the soil...
Out-of-stock

$14.00 $20.00  
9 pc(s)
This is a class 10 64GB microSD memory card, perfect for housing operating systems for single board computers and a multitude of other information. Since this is a class 10 UHS-I microSD it is capable of transferring data at speeds up to 100MB/s allowing it to have a noticeable increase in...

$3.50  
5 pc(s)
This is an awesome little microSD USB reader. Just slide your microSD card into the inside of the USB connector, then stick this into a USB port and the card's contents will pop up on your computer. Very sneaky - we love it! This little guy is great for pulling data logs off microSD media. This...

$3.99  
20 pc(s)
The Raspberry Pi Zero Case has been designed to fit both the Pi Zero and the Pi Zero W. These cases consist of several parts and protect the Raspberry Pi Zero from things like rogue wires that might short it out while still allowing full access to the board. Simply snap the RPi into the bottom...

$0.30 $0.45  
249 pc(s)
These are two pin jumper caps (also called shunts) that will create an electrical connection between two pin headers. Commonly used to modify settings on a board or device.

$2.95  
Out-of-stock
Looking for a battery powered liquid pump for your Micro:Bit project? This submersible Mini Liquid Pump operates between DC 2.5V to 5V. You can PWM the motor to speed up or slow down the flow rate. Works great with motor driver or a simple relay. This liquid pump does not come with...
Out-of-stock

$6.99  
4 pc(s)
MAX30102 Sensor is an integrated pulse oximetry and heart-rate monitor module. It is equipped with a red and IR LEDs as well as a very sensitive photon detector. The idea is to pulse the different LEDs, then detect what shines back. Based on the reflected signature it's possible to measure...

$4.50  
6 pc(s)
This miniature PIR sensor is designed for motion detection. It uses pyroelectric sensor to detect motion by measuring changes in the infrared levels emitted by surrounding objects. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything moves after that...

$19.80  
1 pc(s)
This 2WD Robot Chassis Kit is easy to assemble and use robot chassis platform. It provides you with everything you need to give your robot a fast two wheel drive platform with plenty of room for expansion to add various sensors and controllers (such as Arduino). All you need to do is...

$4.80  
9 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack HUB Module is used for GROVE port expanding. It allows three I2C devices with unique address to connect to M5Stack Core. This HUB is...

$22.50  
6 pc(s)
Most ultrasonic distance sensors aren't waterproof which can be a problem if you need your project to withstand the elements outdoors. No need to worry any more! The probe of this sensor is waterproof and is suitable for outdoor applications such as car reversing sensors, security alarms,...

$16.50  
1 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack Mini GPS Module is built around the AT6558 GNSS module. The 56-channel 6 positioning engine boasts a Time-To-First-Fix (TTFF) of...

$3.50  
9 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack Light Module uses photo cell to measure light intensity. The resistance of the photo cell depending on the amount of light it is...

$5.40  
10 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack Angle Module is a rotary switch Unit, simply having a 10K potentiometer inside. This unit can be used for Continuous singal dialing...

$9.95  
4 pc(s)
ENV HAT is a M5StackC compatible environmental sensor for sensing temperature, humidity, barometric pressure and geomagnetic. It consists of three sensors - BMM150 for geomagnetic sensing, BMP280 for barometric pressure sensing and DHT11 to measure temperature and humidity. Because...

$33.00  
8 pc(s)
M5Camera is a development board for digital image processing. It can be programmed for facial recognition, webcam or other image processing applicaton. It features an ESP32 chip with 4M Flash and 520K RAM, and a 2-Megapixel image sensor (OV2640). It also comes with 4 Mbyte PSRAM for extra...

$5.00  
9 pc(s)
For bread-boarding with unusual non-header-friendly surfaces, these rainbow wire will be your best friends! No longer will you have long strands of alligator clips that are grabbing little wires. These wires have a premium male header on one end, and a grippy mini alligator clip on the other....

$5.00  
9 pc(s)
For bread-boarding with unusual non-header-friendly surfaces, these rainbow wire will be your best friends! No longer will you have long strands of alligator clips that are grabbing little wires. These wires have a premium female header on one end, and a grippy mini alligator clip on the...

$4.80  
10 pc(s)
PIR HAT is a M5StackC compatible PIR Motion Sensor. This is a pyroelectric sensor that detects motion by measuring changes in the infrared levels emitted by surrounding objects. When the motion is detected, the sensor will output HIGH and last for two seconds until the next detecting...

$50.20  
1 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack GPS Module is built around the NEO-M8N GNSS module from ublox. The NEO-M8 modules utilize concurrent reception of up to three GNSS...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
9 - 23