Delivery fee

New items

1 2 3 4 5 6 7 8 9 10 11
5 - 19
Sort Alphabetically: A to Z
24 Per Page
3.3V, 1A Step-Down Voltage Regulator D24V10F3
$14.50  
5 pc(s)
This D24V10F3 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 3.3V while allowing for a maximum output current of 1 A. This regulator offers typical efficiencies between 80% and 90% and has a very low dropout, so it can be used with input...
− +
3.3V, 2.5A Step-Down Voltage Regulator D24V25F3
$35.00  
10 pc(s)
This D24V25F3 synchronous buck voltage regulator takes an input voltage of up to 38 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.5 A and features reverse voltage protection. Typical efficiencies of 80%...
− +
-20%
3.5" Resistive Touchscreen LCD + Pre-configured 16GB microSD Card For RaspberryPi
$37.60 $47.00  
7 pc(s)
The Raspberry Pi Display Module Kit is designed to provide a quick and easy interface to Raspberry Pi without any wiring hassles. It features a fully assembled 3.5 inches 480x320 high resolution LCD display with resistive touchscreen, engineered specifically to let you quickly attached the...
− +
3.5mm 4-Pole (TRRS) Plug w/Spring Strain Relief
$1.50  
10 pc(s)
Repair or design your very own audio cables with these nice and durable phono-jack connectors. This is a great plug to make your own cable with. it's made out of durable metal with a flexible, sturdy spring for strain-relief. Just solder the connector to some wires and you have a DIY audio...
− +
3.5mm Stereo Audio Jack Terminal Block
$1.95  
9 pc(s)
One truth about working with audio is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block audio connectors so much. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. This is...
− +
3.5mm Stereo Audio Jack Terminal Block - 4-Pole (TRRS)
$1.95  
8 pc(s)
One truth about working with audio is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block audio connectors so much. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. This is...
− +
3.5mm Stereo Plug
$0.50  
13 pc(s)
This is a simple 3.5mm stereo audio plug with a screw-on plastic shroud. These are great for projects that plug into headphone jacks. Stereo plugs can also be used for carrying serial comm connections! The outer shell unscrews to reveal solder terminals on the inside of the plug. Solder on your...
− +
3.5mm Stereo Plug w/Spring Strain Relief
$1.95  
4 pc(s)
Repair or design your very own audio cables with these nice and durable phono-jack connectors. This is a great plug to make your own cable with. it's made out of durable metal with a flexible, sturdy spring for strain-relief. Just solder the connector to some wires and you have a DIY audio...
− +
32x8 SPI Dot Matrix Display Module - MAX7219 - Red
$14.99  
1 pc(s)
This 32 x 8 SPI Dot Matrix Module allows you to experiment with dot matrix LED's without all the complicated wiring. The module makes use of the MAX7219 LED driver which handles all the complicated stuff such as multiplexing the LEDs and driving them at the correct currents. What's more, the...
− +
-50%
3DR Buzzer for PX4 / Pixhawk
$2.25 $4.50  
52 pc(s)
This buzzer is used with Pixhawk and PX4 autopilot to annunciate status tones. The buzzer includes a two-position DF14 connector on one side that plugs directly into the Pixhawk or PX4 FMU board. Wire length: ~190mm
− +
-55%
3DR Safety Switch for PX4 / Pixhawk
$4.50 $9.90  
60 pc(s)
3D Robotics Safety Switch for PX4 / Pixhawk is a mandatory component of the Pixhawk autopilot system, allowing you to handle your vehicle safety by disabling the motors until you activate the switch. The safety switch features a three-position DF13 connector to connect directly to the...
− +
4 x 18650 Battery Holder
$3.00  
7 pc(s)
Battery holder for four 18650 Lithium Ion batteries, terminated with ~150mm leads
− +
-17%
4 x AA Battery Holder
$1.00 $1.20  
23 pc(s)
Battery holder for four AA batteries, terminated with ~150mm leads
− +
-20%
4 x AA Battery Holder with Barrel Jack
$1.20 $1.50  
36 pc(s)
This is a simple 4 cell AA battery holder. The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector. The connector mates with the barrel jack on the Arduino Uno (among a number of other products) allowing you to easily make your project...
− +
4 x AA Battery Holder with Cover and Switch
$2.50  
3 pc(s)
Enclosed battery holder for four AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose the battery. It also features a switch that lets you open and close the electrical connection between the batteries and the holder's leads. The leads are...
− +
4 x AA Battery Holder with On/Off Switch, 3-Pin JST
$2.80  
5 pc(s)
Enclosed battery holder for four AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose the battery. It also features a switch that lets you open and close the electrical connection between the batteries and the holder's leads. The leads are...
− +
4 x AA Battery Holder with Switch & Barrel Jack
$3.50  
8 pc(s)
This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover and an ON/OFF switch which can be used to control power to your project. The cable is terminated with a standard 5.5x2.1mm, center positive barrel jack...
− +
-20%
4 x AAA Battery Holder with Cover and Switch
$2.00 $2.50  
13 pc(s)
Enclosed battery holder for four AAA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose the cells. It also features a switch that lets you open and close the electrical connection between the batteries and the holder's leads. The leads are...
− +
4-Blade Propeller - 80mm Diameter
$0.80  
6 pc(s)
Small 4 blade propeller, 80mm in diameter. It push fits directly onto our toy DC motor . NOTE: Toy DC motor not included. Dimensions : Ø80 x 12.8mm Center bore：1.9 mm
− +
40-Pin Rainbow Wire, 20cm - F/F
$3.50  
139 pc(s)
This Rainbow Wire provides a convenient way to connect the signals in your projects. You can always pull the rainbow wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses. The color-coding can be used to organize power, ground and other signal types...
− +
40-Pin Rainbow Wire, 20cm - M/F
$3.50  
7 pc(s)
This Rainbow Wire provides a convenient way to connect the signals in your projects. You can always pull the rainbow wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses. The color-coding can be used to organize power, ground and other signal types...
− +
40-Pin Rainbow Wire, 20cm - M/M
$3.50  
117 pc(s)
This Rainbow Wire provides a convenient way to connect the signals in your projects. You can always pull the rainbow wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses. The color-coding can be used to organize power, ground and other signal types...
− +
40V, 100A Management System for 6 to 10 Cells Lithium Ion Batteries (BMS1040A)
Contact us for details

 
 
RoboteQ 's BMS1040A is a battery management and protection system for building cost-effective, ultra-efficient and high current power sources using Lithium battery cells. The BMS connects to an array of battery cells at one end, and to a user load at the other. BMS1040A is optimised...
40V, 100A Management System for 6 to 10 Cells Lithium Ion Batteries w/BlueTooth (BMS1040ABT)
Contact us for details

 
 
RoboteQ 's BMS1040ABT is a battery management and protection system for building cost-effective, ultra-efficient and high current power sources using Lithium battery cells. The BMS connects to an array of battery cells at one end, and to a user load at the other. BMS1040ABT is...
1 2 3 4 5 6 7 8 9 10 11
5 - 19

Recently Viewed