Delivery fee

New items

2 - 16
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
18 - 32
Newest Items First
24 Per Page
MQ-6 Gas Sensor (Propane, Butane and LPG)
$4.20  
3 pc(s)
This MQ6 Gas Sensor module is useful for gas leakage detection. It is suitable for detectingI Propane, Butane and LPG, and other combustible gas. The sensitivity of the sensor can be adjusted by potentiometer. Features Good sensitivity to wide range of combustible gas...
− +
MQ-7 Gas Sensor (Carbon Monoxide)
$4.50  
2 pc(s)
This is a simple-to-use Carbon Monoxide (CO) sensor, suitable for sensing CO concentrations in the air. The MQ-7 can detect CO-gas concentrations anywhere from 20 to 2000ppm. The sensitivity of the sensor can be adjusted by potentiometer. Features Good sensitivity to Carbon...
− +
MQ-8 Gas Sensor (Hydrogen)
$4.50  
2 pc(s)
This is a simple-to-use hydrogen gas sensor, suitable for sensing hydrogen concentrations in the air. The MQ-8 can detect hydrogen gas concentrations anywhere from 100-10000ppm. This sensor has a high sensitivity and fast response time. The sensitivity of the sensor can be adjusted by...
− +
MQ-9 Gas Sensor (Carbon Monoxide / Combustible)
$4.50  
4 pc(s)
This is a simple-to-use Carbon Monoxide / Combustible gas sensor, suitable for sensing Carbon Monoxide / Combustible gas concentrations in the air. The MQ-9 can detect Carbon Monoxide / Combustible gas concentrations anywhere from 100-10000ppm. This sensor has a high sensitivity and fast...
− +
MQ-135 Gas Sensor For Indoor Air Quality Monitor
$4.50  
2 pc(s)
This is a simple-to-use gas sensor for indoor air quality monitor, suitable for sensing NH3, NOx, alcohol, Benzene, smoke and CO2 in the air. The MQ-135 can detect NH3 and Alcohol gas concentrations anywhere from 10-300ppm and Benzene from 10-1000ppm. This sensor has a high sensitivity and...
− +
MQ-2 Gas Sensor (LPG, Propane, Hydrogen, Methane)
$4.20  
2 pc(s)
This MQ2 Gas Sensor module is useful for gas leakage detection. It is suitable for detectingI LPG, Propane, Hydrogen, Methane and other combustible steam. The sensitivity of the sensor can be adjusted by potentiometer. Features Good sensitivity to wide range of combustible gas...
− +
Mini 3-Wire Volt Meter (0 - 99.9VDC) - Green
$2.95  
3 pc(s)
Put a voltage meter anywhere with this very handy display. These are often used by RC hobbyists for keeping track of batteries but we thought it would be great on a breadboard or enclosure. This is the 3-wire version of the volt meter, two wires are used to power it and the third wire is used...
− +
Mini 3-Wire Volt Meter (0 - 99.9VDC) - Red
$2.95  
9 pc(s)
Put a voltage meter anywhere with this very handy display. These are often used by RC hobbyists for keeping track of batteries but we thought it would be great on a breadboard or enclosure. This is the 3-wire version of the volt meter, two wires are used to power it and the third wire is used...
− +
Mini 3-Wire Volt Meter (0 - 99.9VDC) - Yellow
$2.95  
7 pc(s)
Put a voltage meter anywhere with this very handy display. These are often used by RC hobbyists for keeping track of batteries but we thought it would be great on a breadboard or enclosure. This is the 3-wire version of the volt meter, two wires are used to power it and the third wire is used...
− +
Mini 3-Wire Volt Meter (0 - 99.9VDC) - Blue
$2.95  
9 pc(s)
Put a voltage meter anywhere with this very handy display. These are often used by RC hobbyists for keeping track of batteries but we thought it would be great on a breadboard or enclosure. This is the 3-wire version of the volt meter, two wires are used to power it and the third wire is used...
− +
2 x AAA Battery Holder with JST Connector
$1.40  
1 pc(s)
This 2xAAA Battery Cage with JST connector is compatible with the BBC micro:bit. Supplied with colour coded power leads and a JST connector at the end, this battery cage is light and features a M3 mounting hole in the centre so it can be attached to the back of BBC micro:bit cases. The JST...
− +
Kitronik Edge Connector Breakout Board for BBC micro:bit
$8.90  
9 pc(s)
Looking to do more with your BBC micro:bit? Unlock its potential with this pre-built version of our Edge Connector Breakout Board! This breakout board has been designed to offer an easy way to connect additional circuits and hardware to the pins on the edge of the BBC micro:bit. It provides...
− +
Motor Driver Board v2 for the BBC micro:bit
$23.90  
7 pc(s)
This board provides a simple way to add motor driving capability to a BBC micro:bit. It allows two motors to be driven with full forward, reverse & stop control. It has terminal blocks to connect four input devices and a regulated 3V supply is fed in to the 80 way connector to power the...
− +
MI:power board for the BBC micro:bit
$9.50  
3 pc(s)
When assembled, the MI:power board is connected directly to the 3V, GND and P0 connections on the micro:bit. The 3V and GND connections provide power to the micro:bit and the built in buzzer is connected to P0, which is the default output pin when using the audio functions in the Block Editor...
− +
10A Relay Module For 3.3V And 5V Controller
$15.50  
2 pc(s)
This 10A Relay Module is a little different to the other relays in our store - not only is it compatible with 5V Arduino boards, but also with Raspberry Pi, BBB (BeagleBoard Black), mbed, Intel Joule, Arduino 101 and other 3.3V devices. It is specially designed for low-voltage devices and...
− +
-20%
LilyPad LED Blue (5pcs)
$4.75 $5.95  
3 pc(s)
This is a simple pack of five Blue LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively...
− +
-40%
In-Line Power Switch - White
$0.60 $1.00  
3 pc(s)
This inline switch is great when you just want a simple on/off toggle switch that's already enclosed. Inside is a double pole rocker switch with screw terminals. Features : SPDT 6A, 250VAC Clicky Sound Dimensions : 60.9(L) x 26.5(W) x 15.5(H)mm
− +
Timing Pulley - Shaft Mount (20T, 5mm Bore)
$2.50  
3 pc(s)
These shaft-mountable aluminum timing pulleys use 2GT timing belts and attach to a 5mm output shaft with a pair of set screw. They have 20 teeth with a gear pitch of 2mm, an outer diameter of 16mm, a bore of 5mm, and requires a belt width of 6mm. Specification Teeth: 20...
− +
Timing Pulley - Shaft Mount (30T, 5mm Bore)
$4.50  
4 pc(s)
These shaft-mountable aluminum timing pulleys use 2GT timing belts and attach to a 5mm output shaft with a pair of set screw. They have 30 teeth with a gear pitch of 2mm, an outer diameter of 21.6mm, a bore of 5mm, and requires a belt width of 6mm. Specification Teeth: 30...
− +
Timing Pulley - Shaft Mount (36T, 5mm Bore)
$4.80  
2 pc(s)
These shaft-mountable aluminum timing pulleys use 2GT timing belts and attach to a 5mm output shaft with a pair of set screw. They have 36 teeth with a gear pitch of 2mm, an outer diameter of 25.4mm, a bore of 5mm, and requires a belt width of 6mm. Specification Teeth: 36...
− +
Timing Belt - 2GT (per meter)
$4.70  
11 pc(s)
These are resistant 2GT sized timing belts that fit snug inside of these timing pulleys . Each belt is manufactured from wear resistant Polyurethane and high tensile steel cord to provide a fair ammount of strength and durability. The timing belts have a width of 6mm and 2mm pitch....
− +
Timing Belt - 2GT (Length 110mm)
$4.70  
5 pc(s)
These are resistant 2GT sized timing belts that fit snug inside of these timing pulleys . Each belt is manufactured from wear resistant Polyurethane and high tensile steel cord to provide a fair ammount of strength and durability. The timing belts have a width of 6mm, a length of 110mm,...
− +
Timing Belt - 2GT (Length 112mm)
$4.90  
2 pc(s)
These are resistant 2GT sized timing belts that fit snug inside of these timing pulleys . Each belt is manufactured from wear resistant Polyurethane and high tensile steel cord to provide a fair ammount of strength and durability. The timing belts have a width of 6mm, a length of 112mm,...
− +
Timing Belt - 2GT (Length 122mm)
$5.00  
6 pc(s)
These are resistant 2GT sized timing belts that fit snug inside of these timing pulleys . Each belt is manufactured from wear resistant Polyurethane and high tensile steel cord to provide a fair ammount of strength and durability. The timing belts have a width of 6mm, a length of 122mm,...
− +
2 - 16
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
18 - 32