We are still operating during CB period, and will ship your order ASAP. If you're unable to reach us by phone, drop us an email.

Others

$2.80  
24 pc(s)
Small propeller for boat, 3 blades and 27mm in diameter. It push fits directly onto our toy DC motor . Dimensions : Ø27 x 6.9mm Center bore:1.9 mm

$4.95  
19 pc(s)
Small fiber reinforced nylon propeller for boat, 3 blades and 40mm in diameter. It push fits directly onto our toy DC motor . Dimensions : Ø40 x 18.5mm Center bore:1.9 mm

$9.00  
4 pc(s)
Small nylon propeller for port and starboard thruster. Featuring both left- and right-handed rotation. 3 blades and 36mm in diameter. It push fits directly onto our toy DC motor . Dimensions : Ø36 x 18.5mm Center bore:1.9 mm

$1.80  
54 pc(s)
Small 3 blade propeller, 58mm in diameter. It push fits directly onto our toy DC motor . Dimensions : Ø58 x 10.8mm Center bore:1.9 mm

$20.50  
24 pc(s)
Looking for a battery powered liquid pump? This non-submersible diaphragm liquid pump will operates between DC 6V to 12V. You can PWM the motor to speed up or slow down the flow rate. Works great with motor driver or a simple relay. Each diaphragm liquid pump comes with a pair of...

$19.50  
23 pc(s)
Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This makes the solenoid able to pull from one end. This solenoid has a slug...

$11.90  
23 pc(s)
Looking for a battery powered liquid pump for your Micro:Bit project? This submersible Mini Liquid Pump operates between DC 2.5V to 5V. You can PWM the motor to speed up or slow down the flow rate. Works great with motor driver or a simple relay. This liquid pump works with 7x9mm...

$19.50  
4 pc(s)
Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This makes the solenoid able to pull from one end. This solenoid has a slug...

$19.50  
18 pc(s)
Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This makes the solenoid able to pull from one end. This solenoid has a slug...

$11.90  
66 pc(s)
Looking for a battery powered liquid pump for your Micro:Bit project? This Mini Submersible Liquid Pump operates between DC 2.5V to 5V. You can PWM the motor to speed up or slow down the flow rate. Works great with motor driver or a simple relay. This liquid pump works with 7x9mm...

$11.90  
Out-of-stock
Looking for a battery powered liquid pump for your Micro:Bit project? This Mini Submersible Liquid Pump operates between DC 2.5V to 5V. You can PWM the motor to speed up or slow down the flow rate. Works great with motor driver or a simple relay. This liquid pump works with 7x9mm...
Out-of-stock

$26.15  
46 pc(s)
Looking for a liquid pump for your plant watering project? This Mini Submersible Liquid Pump Kit comes with a miniature pump with driver board and battery pack for 2xAAA battery. The driver board is designed to operate between 3V to 6VDC supply. It works with PWM input, so you can increase or...

$15.00  
23 pc(s)
This mini vacuum pump operates at 6V and has enough suction for most small projects such as blood pressure monitors and automatic machine assembly . This vacuum pump works with 3x5mm tubing . Features: Rated Voltage: 6VDC Rated Current: <420mA Inflation...

$9.50  
Out-of-stock
This pan/tilt bracket consists of two brackets and all the hardware you need to attach them to make a pan/tilt mechanism using two servo motors. This pan/tilt bracket works with our small servo motor . Documents: Dimensional Drawing Assembly Guide
Out-of-stock

$36.50  
18 pc(s)
Move fluid safely from here to there with this very nice little pump. Unlike most liquid pumps, this is a peristaltic type - the pump squishes the silicone tubing that contains the liquid instead of impelling it directly . The upshot? The pump never touches the fluid which makes this an...

$10.50  
11 pc(s)
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening project. There are two 1/2" (Nominal non-taped National Pipe) inlet / outlet. Normally, the valve is closed. When 12VDC is applied to the two terminals, the valve...

$3.50  
10 pc(s)
This soft, flexible PVC tubing works with our Diaphragm Liquid Pump . Sold by per meter in custom lengths. Dimensions : Inner Diameter: 7mm, Outer Diameter: 10mm Length: 1 meter Weight: 40g/meter

$17.50  
4 pc(s)
This robotic claw is a step up from the classic. The MKII takes everything you loved about the standard robot claw from DAGU and makes some significant improvements! Just like the classic claw, they are made from metal and are pretty heavy-duty, but the MKII also features brass sleeves...

$45.50  
5 pc(s)
This is a pan/tilt bracket designed specifically to work with the robotic claw MKII that we sell. It comes with all of the hardware you need to connect it to the claw and even includes the 'tilt' control servo. Panning can be controlled by attaching a medium servo to the bracket milled into the...

$29.95  
4 pc(s)
Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers. According to the datasheet this solenoid is rated for 36V but they work like a charm at 12V. With a throw of 10mm these solenoids are great for all kinds of motion applications such as...

$9.50  
6 pc(s)
Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers.This smaller solenoid is designed to work directly with 5V which makes it a great match for embedded projects. It has a throw of about 6mm and 2 M2 mounting holes on the body. The wire...

$19.50  
40 pc(s)
Looking for a DC powered liquid pump for your project? This submersible Liquid Pump operates between DC 5.5V to 12V. It comes with an inlet valve which you can adjust the flow rate manually. You also can PWM the motor to speed up or slow down the flow rate. Works great with motor driver or a...

$12.50  
1 pc(s)
Track set for tank treads. Use these treads to create your own tank setup. These work superbly with the Tamiya dual gear box. Comes with: 2 Tracks x 30 Links 2 Tracks x 10 Links 2 Tracks x 8 Links 2 Large Drive Sprockets 2 Large Idler Wheels 6 Large Road Wheels...

$3.75  
19 pc(s)
This soft, flexible tubing is specially sourced for our Mini Vacuum Pump - 6V . It is made of silicone rubber which is odorless, flexible and resistant to high temperatures. It can be operated under a temperature range of -60 to +200℃. Note : This tubing is sold by per meter in...

$4.50  
21 pc(s)
This soft, flexible tubing is specially sourced for our Diaphragm Liquid Pump and mini liquid pump . It is made of silicone rubber which is odorless, flexible and resistant to high temperatures. It can be operated under a temperature range of -60 to +200℃. No tubing clamp is...

$3.50  
55 pc(s)
This soft, flexible tubing is specially sourced for our Peristaltic Liquid Pump . It is made of silicone rubber which is odorless, flexible and resistant to high temperatures. It can be operated under a temperature range of -60 to +200℃. Note : This tubing is sold by per meter in...

$35.00  
3 pc(s)
This vacuum pump really sucks! This pump operates at 12V and has enough suction for most small projects. Features: 12V motor 12W operation 1/4" barbs 0-16" Hg vacuum range Documents: Dimensional Drawing Spec Sheet