Browse by category

EduFun STEM
Arduino
BBC micro:bit
Raspberry Pi
machine learning
Audio
Breakout Boards
Cables
Camera / Lenses
Components
Development Boards
E-Textiles
GPS
Instruments
LED / LCD
Power / Batteries
Programmers
Prototyping
RFID / NFC
Robotics / Hardware
Sensors
Tools
Wireless
School & Uni Packs

Tools

Newest Items First
63 Per Page
Insulated IC Puller (Extractor) Tool (DIP)
$2.50  
3 pc(s)
Pull DIP chips out of IC sockets and breadboards with ease and without bending any of the IC's pins, perfect for removing chips with 8-24 pins. Stainless steel with PVC insulated coating.
− +
PLCC IC Puller (Extractor) Tool
$2.50  
5 pc(s)
Designed to extract Plastic Leaded Chip Carriers (PLCC) without damaging them, this PLCC Extractor is perfect for removing PLCCs with 20-128 pins.
− +
Soldering Iron Stand
$9.90  
7 pc(s)
This is a simple soldering iron stand with heavy base for excellent stability. A cleaning sponge is included. Note: Not compatible with TOL-01027
− +
6" Digital Calipers
$21.50  
1 pc(s)
Digital calipers are an absolute essential. Here at SparkFun we use them all the time. These premium calipers come with an extra battery and auto shut-off. Measurements can be taken in either metric or standard. The calipers are 6" in length and make a great addition to any tool set....
− +
Adjustable PCB Clamp Holder
$32.50  
2 pc(s)
This Adjustable PCB Clamp Holder from Pro's Kit is designed for larger, heavier PCB soldering and desoldering. But it works great for small boards too and is very easy to adjust. A great choice for any workbench if you've got enough room for it! 4 slots for varying PCB thicknesses Sturdy,...
− +
Solder Leaded - 100-gram Spool
$9.95  
Out-of-stock
This is your basic tube of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 100 grams. Easy to solder with - recommended for beginners. Mix: 63% Sn / 37% Pb
Out-of-stock
Brass Sponge Solder Tip Cleaner
$7.95  
5 pc(s)
This is a brass sponge that will help clean your soldering iron tip. Use it to remove residue from your iron tip before soldering. It cleans better than conventional sponges and will not damage your iron tip. Made of low abrasive brass shavings, requires no water and won't cool down the tip.
− +
Solder Leaded - 15-gram Tube
$3.20  
3 pc(s)
This is your basic tube of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 15 grams (around 5ft). Easy to solder with - recommended for beginners. Mix: 63% Sn / 37% Pb
− +
Solder Wick - 1.5m Spool
$3.50  
3 pc(s)
Use this solder wick along with the solder sucker to clean up soldering messes. Wick really comes in handy when soldering or desoldering surface-mount parts.
− +
Needle Set
$2.80  
1 pc(s)
This set of sewing needles is a must-have when stitching together your next e-textile project. Each envelope contains three 48mm, 1.23mm thick needles and two smaller 39mm, 0.67mm thick needles. The eye of each size needle is large enough to easily thread with our conductive thread.
− +
Pocket Screwdriver Set
$5.20  
2 pc(s)
What should every hacker have available to them? That’s right, a screwdriver (you have to get into those cases somehow). What makes screwdrivers even better is when there are a variety of interchangeable bits to use in different situations as you need them. This Pocket Screwdriver Set provides...
− +
MakerBeam M3 Hex Nut Driver
$7.50  
5 pc(s)
This high quality hex nut driver (5,5mm) is a standard item in our MakerBeam Starter Kit. Work with both standard nuts and Cap nuts.
− +
Resistor Lead Bending Tool
$7.90  
2 pc(s)
This little piece of notched plastic is a Resistor Lead Bending Tool. Sometimes referred to as a “forming” tool, this little guy provides you with an easy and reliable way to get the exact distance between two resistor leads that you need to PTH soldering. The Resistor Lead Bending Tool is...
− +
Third Hand
$14.50  
7 pc(s)
This is a solderer's best helper, the third hand. Comes with a heavy base, two alligator clips, a soldering iron holder, and a good magnifying glass. Note that we don't normally need a third hand. It's nice, but soldering flat on a table works just fine. Then again, the desk is starting to look...
− +
Desoldering Pump
$7.25  
1 pc(s)
This is a great little tool for solder rework. It allows you to pull the molten solder out of a connection or via. To use it you simply depress the plunger, heat up your solder, place the nozzle over the solder you want to remove and finally just push the button. The piston pops up and the...
− +
Hakko Soldering Iron - 40W 230V EU Plug
$12.50  
43 pc(s)
This is a simple fixed temperature, quick heating soldering iron from Hakko. It is not as powerful as soldering station such as Hakko FX-888, but if you really need a low cost iron for your tool box, this lovely iron is a good choice. At 40W, this iron is perfect for kit building or minor...
− +
Tweezers - Curved (ESD Safe)
$6.05  
5 pc(s)
These are nice, solid curved tweezers. They have a very fine tip which allows you to pick up very small parts with precision. This is a great tool to have if you're working with surface mount components or anything with very small parts. The ESD-safe coating will also help prevent...
− +
Tweezers - Straight (ESD Safe)
$6.05  
5 pc(s)
These are nice, solid curved tweezers. They have a very fine tip which allows you to pick up very small parts with precision. This is a great tool to have if you're working with surface mount components or anything with very small parts. The ESD-safe coating will also help prevent...
− +
Solder Lead Free - 100-gram Spool
$12.50  
5 pc(s)
This is your basic spool of lead free solder with a water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder. If you are just beginning to solder, we recommend you order the leaded...
− +
Solder Lead Free - 15-gram Tube
$5.90  
13 pc(s)
This is you basic tube of unleaded (Pb-free) solder with a 60/40 no clean, water soluble resin core. 0.031" gauge and 15 grams. Mix: 96.5% tin / 3.0% silver / 0.5% copper
− +
Needle Nose Pliers
$3.50  
4 pc(s)
Mini Pliers. These are great little pliers! A must have for any hobbyist or electrical engineer. Crucial for inserting devices into bread boards and bending pins. 4" long.
− +
Diagonal Cutters
$3.80  
7 pc(s)
Mini Diagonal Cutters. These are great little cutters! A must have for clipping leads and extra solder tails. 4" long.
− +
Wire Strippers 30AWG
$9.90  
17 pc(s)
These are good quality 6" wire strippers with 6 gauge settings. We really wanted to stock these because they strip 30AWG wire wrap wire nicely as well as the standard 22AWG hook up wire. Features: 30, 28, 26, 24, 22, 20 AWG settings 0.25, 0.32, 0.4, 0.5, 0.6, 0.8 mm...
− +