Jetson

$10.50  
18 pc(s)
2.4GHz/5GHz Duck Antenna with regular RP-SMA RF connector and IPEX interface cable for connecting to our dual mode wireless module . Features: Type: Omni-Directional Frequency: 2400~2500MHz/5150~5850MHz Gain: 3dBi typ. Impedance 50Ω Dimensions :...

$4.50  
31 pc(s)
This dual band Flexible Printed Circuit (FPC) WiFi antenna covers the WLAN bands of 2.4 - 2.5 GHz and 5.15 – 5.85 GHz. It has a 120mm cable assembly with a standard IPEX connector for ease of connection to the board. With this small form factor the antenna is perfect internal options for WiFi...

$6.50  
56 pc(s)
Delrin ball bearings are made of a composite material well-suited for low- to moderate-load applications. This 25mm ball bearings is specially sourced for the Nvidia Jetbot. Dimensions: 25mm diameter

$12.00  
14 pc(s)
Need a USB jack for charging or powering a project, but don't want to lug around a computer? This switching supply gives a clean regulated output at up to 2.5A! This adapter has a standard USB 'A' connector for the output so you can power your Arduino, Raspberry Pi, etc. through a USB cable....

$19.50  
3 pc(s)
This power supply is a highly reliable desktop style single-output adapter. It can supply 5V DC up to 6 Amps, running from 100V to 240V power. It comes with European Style Plug but you can use any plug adapter with a standard 'figure-8' cable. The output connects to a 2.1mm DC plug....

$15.00  
9 pc(s)
This 5V PWM cooling fan helps to prevent your Jetson Nano from overheating when operate at maximum performance. It supports PWM based speed control and can be connected directly to the 4-pin PWM fan header on the Jetson Nano Developer Kit. The fan will be mounted to the heatsink with 4pcs...

$28.50  
4 pc(s)
This is a class 10, 64GB, microSDXC UHS-I card that has been pre-installed with the operating system for the Jetson Nano produced in house here at SGBotic. This SD card is perfect for a Jetson Nano / Jetbot first timer or beginner while still providing convenience for anyone with more...

$63.95  
13 pc(s)
This 8 Mega Pixels Camera Module is a custom designed add-on for Jetson Nano. The camera features a Sony IMX-219 image sensor and uses the dedicated CSI interface for connecting to the Jetson Nano. This camera module is capable of 1080p video and still images. The board itself is tiny, at...

$54.95  
12 pc(s)
This 8 Mega Pixels Camera Module is a custom designed add-on for Jetson Nano. The camera features a Sony IMX-219 image sensor and uses the dedicated CSI interface for connecting to the Jetson Nano. This camera module is capable of 1080p video and still images. The board itself is tiny,...

$36.75  
4 pc(s)
This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). It features a fully-dedicated PWM driver chip that handles all the motor and speed controls over I2C. Since the FeatherWing only...

$39.50  
2 pc(s)
This is a dual mode wireless module applicable for Jetson Nano. It supports 2.4GHz / 5GHz dual band WiFi and Bluetooth 4.2. Features : Chip: Intel 8265AC Bands: 2.4GHz / 5GHz Speed: 300Mbps / 867Mbps WiFi protocol: 802.11ac Bluetooth version: 4.2 NIC...

$3.50  
12 pc(s)
This Right Angle USB microB Cable features a right angle USB 'A' male connector and a right angle USB Micro-B connector. The right-angled connectors position the cable nearly flush against a wall or other surface, and eliminate the space typically required to accommodate a 'straight'...

$7.50  
2 pc(s)
This is a 25 meter roll of kapton / polyimide tape. This tape is a fantastic insulator, like electrical tape, but it can withstand temperatures as high as 258°C (496°F). It also provides good resistance to corrosion and the silicone adhesive holds tight throughout the tape's rated temperature...

$4.95  
42 pc(s)
This I2C Adapter provides a convenient way to connect the OLED display module and other I2C devices to Jetson Nano or Raspberry Pi. The 3.3V, Ground, SCL and SDA pins are breakout to multiple connectors. A XH2.54 cable is included in the package. NOTE : You can still access the 5V pin on...

$34.50  
13 pc(s)
This IMX219 camera module is supplementary for Raspberry Pi official camera to fulfil the demands for wide view angle. It features 8-megapixel 160 degree view angle. If you got a Raspberry Pi Camera Board V2 and require wide view angle, here it is. Features : Adjustable Focus Lens...

$319.95  
1 pc(s)
The JetBot AI Kit is a robot platform that can be powered by your own Jetson Nano Developer Kit by NVIDIA. This kit is based on the open-source 3D printed NVIDIA JetBot! It is a great launchpad for creating AI projects for makers, students and enthusiasts who already own a Jetson Nano and are...

$29.90  
89 pc(s)
The Magician Rover Chassis v2 is our latest robot platform from Dagu. It features two gearmotors with 65mm wheels and a rear caster. The chassis plates are injection molded with a wide variety of mounting holes for sensors, controllers, power, etc. Simply bolt the two plastic platforms...

$23.50  
36 pc(s)
This is a class 10 64GB microSD memory card, perfect for housing operating systems for single board computers and a multitude of other information. Since this is a class 10 UHS-I microSD it is capable of transferring data at speeds up to 100MB/s allowing it to have a noticeable increase in...

$9.50  
20 pc(s)
This miniature OLED display is perfect for adding graphics or texts to your next microcontroller project. It is small, measuring 0.91" across, but very readable due to the high contrast of an OLED display. This display is made of 128x32 individual blue OLED pixels, each one is turned on or...

$59.90  
9 pc(s)
This is a 3D printing service for the official Nvidia's Jetbot chassis, an open-source educational robot based on NVIDIA Jetson Nano. You can use this service if you don't have access to a 3D printer but want to build this little robot! Lead-time for each printing ranges from 2 days to...

$3.50  
17 pc(s)
This mounting kit is intended for use with the NVIDIA JetBot robot. It includes the necessary screws and nuts to secure the Jetson Nano, motors, camera, etc., to the 3D printed chassis. Kit includes: 4x M3*25 Phillips pan head machine screw (stainless steel) 4x M3 nuts...

$169.00  
3 pc(s)
The latest addition the Jetson family, the NVIDIA® Jetson Nano™ Developer Kit delivers the performance to run modern AI workloads in a small form factor, power-efficient (consuming as little as 5 Watts), and low cost. Developers, learners, and makers can run AI frameworks and models for...

$3.00  
58 pc(s)
This Rubber Wheel For TT Gear Motor is equipped with a nice, thick rubber tread with excellent traction, and a press-fit design to make connecting super quick and easy. Note : This wheel is only for use with TT gearbox motors . Wheel body: 65 x 28mm

$2.80  
47 pc(s)
This Thin White Wheel For TT Gear Motor is equipped with a rubber tread with excellent traction, and a press-fit design to make connecting super quick and easy. Note : This wheel is only for use with TT gearbox motors . Wheel body: 65 x 18mm

$12.50  
7 pc(s)
This enclosure protects the Jetson Nano from things like rogue wires that might short it out while still allowing full access to the board! The enclosure provides slots to access the peripheral header, USB ports, Ethernet, SD card, HMDI, camera connector as well as cooling fan and vents to...

$4.50  
35 pc(s)
These inexpensive and reliable TT Gear Motors are an easy, low-cost way to get your projects moving. These gear motors require a voltage of 3-6VDC with a no load current of less than 150mA at 3V and possess a stall torque of 0.8kg.cm at 6V, a gearbox ratio of 48:1, and it comes with 2 x 200mm...

$25.50  
3 pc(s)
This wifi module is a miniature USB wireless adapter with massive antenna that supports greater range and speed. It is fully complies with wireless 802.11b/g/n standards with data rate up to 300 Mbps when connecting with wireless 802.11n device. This Wifi module works well with the...

$3.50  
7 pc(s)
The USB Cable A to Pigtail provides a convenient method for hard wire a USB Type A connecting to a device or terminal block. One end of the cable is fitted with a strain relief USB Type A connector. The other end of the cable has stripped and tinned leads. This cable is commonly used to power...

$4.95  
880 pc(s)
USB 2.0 type A to micro USB 5-pin. This is a new, smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Micro USB is found on newer hand held devices like cell phones and portable media devices. Connector shape may vary slightly from image as our stock...

$2.20  
Out-of-stock
USB 2.0 type A to micro USB 5-pin. This is a new, smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Micro USB is found on newer hand held devices like cell phones and portable media devices. Connector shape may vary slightly from image as our stock...
Out-of-stock

$5.95  
2 pc(s)
This USB to Micro USB Cable with switch is 1.5m long and is the perfect hard on/off power switch for your Raspberry Pi or any devices that has a MicroUSB port. Note : The data lines are not connected, so it's mostly just good for powering and charging devices. Dimensions: 1.5...