FREE Local Delivery (non-restricted areas) with min. $65 order (before GST).

In-Store Purchase and Pick-up Option no longer available.

Accessories

$12.99  
Out-of-stock
Make your Internet of Things device cable-free by adding WiFi. Take advantage of the Raspberry Pi USB port to add a low cost, but high-reliability wireless link. This wifi module is a miniature USB wireless adapter with massive antenna that supports greater range and speed. It is fully complies...
Out-of-stock

$4.95  
16 pc(s)
This USB to Type-C Cable with switch is 1.5 meter long and is the perfect hard on/off power switch for your Raspberry Pi 4 or any devices that has a Type-C port. Note : The data lines are not connected, so it's mostly just good for powering and charging devices. Dimensions:...

$4.99  
5 pc(s)
This cable provides a convenience way to connect to your Raspberry Pi or BeagleBone Black serial console port. Inside the big USB plug is a Prolific's PL-2303TA compatible USB to Serial conversion chip and at the end of the 36" cable are four wire - power (red), ground (Black), RX (White) and...

$4.25  
Out-of-stock
This USB to Micro USB Cable with switch is 1.5m long and is the perfect hard on/off power switch for your Raspberry Pi or any devices that has a MicroUSB port. Note : The data lines are not connected, so it's mostly just good for powering and charging devices. Dimensions: 1.5...
Out-of-stock

$1.80  
3 pc(s)
USB Type-C is the latest industry-standard connector for transmitting data and power. This adapter let you attach a USB micro-B cable to a Type-C port. It is suitable for both data transfer and charging.

$4.95  
454 pc(s)
The USB cable with type-C connector is perfect for USB to serial applications and for direct connection to basic microcontrollers (such as the SAMD21 or other with USB built-in). Supporting USB 2.0 speeds and charging up to 3A, this 1.5 meter cable is perfect for embedded enthusiast that need...

$3.90  
18 pc(s)
This is an acrylic base plate that can hold your Raspberry Pi and self-adhesive breadboard. The kit includes screws, washers and other accessories. Dimensions : 150mm x 100mm x 3mm

$14.95  
Out-of-stock
This is the official USB Type-C Power Supply for the Raspberry Pi 4 Model B. This is a wall adapter with a USB Type-C Connector that fulfills the 15.3W power requirements of the Raspberry Pi 4. It can also be used for other devices which require up to 5.1VDC and 3A. Features: AC 100-240V...
Out-of-stock

$4.80  
34 pc(s)
This extra-tall stackable 40-pin female header features two rows of 20 pins spaced with a 0.1″ (2.54 mm) pitch. It includes three 0.1″-thick spacers for additional clearance, and the extended pins allow multiple units to be stacked together. The 2×20 size is notably used on the Raspberry Pi...

$2.90  
22 pc(s)
This 2x20 "tall" header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to extend the heights of your GPIO to accommodate for enclosures or other parts that can encapsulate your Pi. This through-hole header has 40 0.1"-spaced pins and can...

$19.95  
Out-of-stock
This will be a treat for your ears! This compact and highly portable Mini USB Stereo Speaker is a perfect companion for your Raspberry Pi or notebook. Since it is powered over USB, it does not require battery or external power source - simply plug it into your desired device's USB port and enjoy...
Out-of-stock

$7.95  
3 pc(s)
This plug-and-play Mini USB Microphone needs no driver, and its USB interface means you can use it with any computer, laptop, SBC, etc! Works great with a Raspberry Pi computer, but you can also use it with any other computer you want to record audio on. Simply plug it right in and...

$11.95  
6 pc(s)
Unlike most computers, the Pi lacks a Real-Time Clock (RTC). This means the Pi doesn't know what time it is when powered on. While your Pi is connected to a network it will be able to set it's clock correctly using NTP ( Network Time Protocol ) server. Without a network connection your Pi...

$0.20  
34 pc(s)
The micro SD card adapter looks like a regular-sized SD card with a slot in it for the microSD card. It allows you to transfer data between your device and a computer.

$19.90  
16 pc(s)
This is a class 10 64GB microSD memory card, perfect for housing operating systems for single board computers and a multitude of other information. Since this is a class 10 UHS-I microSD it is capable of transferring data at speeds up to 100MB/s allowing it to have a noticeable increase in...

$7.99  
Out-of-stock
Connect an HDMI device with a micro HDMI port to one with a regular size HDMI port together with this basic HDMI cable. It has nice molded grips for easy installation, and is 1.5 meter long. Dimensions: 1.5 meter Long
Out-of-stock

$3.95  
4 pc(s)
This I2C Adapter provides a convenient way to connect the OLED display module and other I2C devices to Jetson Nano or Raspberry Pi. The 3.3V, Ground, SCL and SDA pins are breakout to multiple connectors. A XH2.54 cable is included in the package. NOTE : You can still access the 5V pin on...

$9.95  
1 pc(s)
This nifty adapter cable with durable metal casing converts the digital HDMI video signals which are outputted from Raspberry Pi, into an analog signal required by the widely used VGA monitor. This adapter has an audio jack that provides stereo headphone/line out (HDMI 1.3 cables carry both...

$9.60  
Out-of-stock
This will be a treat for your ears! The Hamburger Mini Speaker is a 3W economical speaker option for any project needing stand-alone sound. The Hamburger features a built-in lithium polymer battery for portable application, a 3.5mm stereo jack (sorry, iPhone 7 users) and two volume options...
Out-of-stock

$0.50  
54 pc(s)
This board makes connecting wires to the Raspberry Pi GPIO incredibly easy. It's a reference board that makes it really easy to see if you're connecting your wires correctly. We've designed the board such that it fits into our Pi enclosure . The board is only 0.8mm thick. Simply slide...

$9.95  
22 pc(s)
This is a handy little USB Bluetooth 4.0 dongle. Utilising the CSR8510 chipset, this dongle is backwards compatible with v2.1 and earlier, but also supports the latest v4.0 low energy bluetooth transmission. It has a maximum distance of up to 50m and includes an indicator LED. Use this Dongle...

$13.50  
13 pc(s)
This Pi T-Expansion Kit comes with a small board that connects to the 40-pin GPIO connector on the Raspberry Pi B+ and Pi2 /3 /3+, and breaks the pins out to breadboard-friendly arrangement and spacing. The Kit comes with a 40 pin ribbon cable, and an already soldered T-Expansion as shown....

$13.50  
11 pc(s)
This Pi T-Expansion Kit comes with a small board that connects to the 40-pin GPIO connector on the Raspberry Pi, and breaks the pins out to breadboard-friendly arrangement and spacing. The Kit comes with a 40 pin ribbon cable, and an already soldered T-Expansion as shown. The PCB has all the...

$0.50  
9 pc(s)
This tiny little aluminium heatsink is a perfect solution for cooling off small surface-mount components such as CPUs on Raspberry Pi or stepper motor driver. The heatsink includes thermal adhesive tape for better heat dissipation. The installation is simple, what you need to do is to remove...

$12.00  
189 pc(s)
Need a USB jack for charging or powering a project, but don't want to lug around a computer? This switching supply gives a clean regulated output at up to 2.5A! This adapter has a standard USB 'A' connector for the output so you can power your Arduino, Raspberry Pi, etc. through a USB...

$3.50  
67 pc(s)
This Rainbow Wire provides a convenient way to connect the signals in your projects. You can always pull the rainbow wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses. The color-coding can be used to organize power, ground and other signal types...