BBC micro:bit

1 2
$5.50  
47 pc(s)
For bread-boarding with unusual non-header-friendly surfaces, these rainbow wire will be your best friends! No longer will you have long strands of alligator clips that are grabbing little wires. These wires have a premium female header on one end, and a grippy mini alligator clip on the...

$5.50  
30 pc(s)
For bread-boarding with unusual non-header-friendly surfaces, these rainbow wire will be your best friends! No longer will you have long strands of alligator clips that are grabbing little wires. These wires have a premium male header on one end, and a grippy mini alligator clip on the other....

$1.95  
152 pc(s)
This terminal block is a spring clamp electrical connector where the individual stripped conductors are clamped down to the metal part by means of a spring. Compare to screw-type terminal block, this Spring Clamp Terminal Block gives you a constant connection. It always exerts the same force on...

$1.40  
1327 pc(s)
This 2xAAA Battery Holder with JST Connector is compatible with the BBC micro:bit. Supplied with ~150mm colour coded power leads and a JST connector at the end, this battery holder is light and can be attached to the back of BBC micro:bit cases. This battery holder features a lid that slides...

$2.25  
12 pc(s)
This 2xAAA Battery Holder with Switch and JST Connector is compatible with the BBC micro:bit. Supplied with ~150mm colour coded power leads and a JST connector at the end, this battery holder is light and can be attached to the back of BBC micro:bit cases. This battery holder features a lid...

$1.40  
18 pc(s)
This 2xAAA Battery Cage with JST connector is compatible with the BBC micro:bit. Supplied with colour coded power leads and a JST connector at the end, this battery cage is light and features a M3 mounting hole in the centre so it can be attached to the back of BBC micro:bit cases. The JST...

$0.80  
59 pc(s)
Pack of 10, 28mm Crocodile Clips. Excellent for fast prototyping where removable connections are essential. Features two side notches at the back of the clip for securing to leads and wires. Available as a pack of 10 clips. These miniature crocodile clips are perfect to use with...

$54.95  
3 pc(s)
NOTE: This buggy can be configured as line following robot with line-following sensor . The Kitronik :MOVE mini MK 2 buggy kit for the BBC micro:bit is the latest version of the ever popular :MOVE mini that provides a fun introduction to robotics. The :MOVE mini is a 2 wheeled...

$78.00  
2 pc(s)
NOTE: This buggy can be configured as line following robot with line-following sensor . The Kitronik :MOVE mini MK 2 buggy kit for the BBC micro:bit is the latest version of the ever popular :MOVE mini that provides a fun introduction to robotics. The :MOVE mini is a 2 wheeled...

$4.50  
Out-of-stock
This is a pack of 4 cables that are pre-terminated with an alligator clip on one end and a male pin on the other. Alligator clips are a staple part for any workbench and with these cables you will be able to easily incorporate those clips into a breadboard, development platform, or anything...
Out-of-stock

$5.50  
30 pc(s)
Alligator clips (or Crocodile clips, if you prefer) are likely to be the most useful thing on your workbench besides the workbench itself. Whether you're just trying to make a few quick connections to test your circuit or having trouble making your multimeter leads stay where you need them,...

$4.80  
36 pc(s)
Alligator clips (or Crocodile clips, if you prefer) are likely to be the most useful thing on your workbench besides the workbench itself. Whether you're just trying to make a few quick connections to test your circuit or having trouble making your multimeter leads stay where you need them,...

$8.90  
54 pc(s)
This T-Expansion For Micro:Bit is a small board that connects to the BBC micro:bit and breaks out all 19 GPIO, power and ground pin to breadboard-friendly arrangement and spacing. This board has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out...

$4.50  
20 pc(s)
This is the perfect cable choice for those that want to output music or sound from BBC micro:bit to headphones or speakers. At one end of the cable are the black and red crocodile clips, which connect to the micro:bit GND and Pin 0 respectively. At the other end of the cable is a 3.5mm...

$18.95  
85 pc(s)
The BBC micro:bit is a pocket-sized computer that lets you get creative with digital technology. You can code, customize and control your micro:bit from anywhere! You can use your micro:bit for all sorts of unique creations, from robots to musical instruments and more. At half the size of a...

$62.00  
1 pc(s)
The ultimate project kit for the BBC micro:bit. Includes all essential accessories and a great electronics kit so you can get started with micro:bit projects. To get you off to a flying start we have included an easy to follow tutorial book which guides you through everything you will...

$22.95  
59 pc(s)
The BBC micro:bit is a pocket-sized computer that lets you get creative with digital technology. You can code, customize and control your micro:bit from anywhere! You can use your micro:bit for all sorts of unique creations, from robots to musical instruments and more. At half the size of a...

$42.90  
1 pc(s)
This Digital Weighing Scale Kit is designed to measure weight up to 5kg. It includes a load cell of 5kg, and an amplifier module that reads load cells to measure weight. By connecting the amplifier module to your microcontroller you will be able to read the changes in the resistance of the...

$8.90  
3 pc(s)
Looking to do more with your BBC micro:bit? Unlock its potential with this pre-built version of our Edge Connector Breakout Board! This breakout board has been designed to offer an easy way to connect additional circuits and hardware to the pins on the edge of the BBC micro:bit. It provides...

$4.95  
108 pc(s)
This is a connector that fits directly to the edge contacts of a BBC micro:bit . The connector has 80 pins, but because of the different widths of the micro:bit edge contacts, some of the micro:bit contacts will map to more than one of this connector's pins. Also, the back half of the pins...

$5.00  
134 pc(s)
The Educational Traffic Light Module is a low cost hardware module designed to allow users to take their first steps into interfacing microcontroller with the real world. It is designed to remove many of the common hurdles people are faced with when getting started using hardware with the...

$9.95  
4 pc(s)
This is a laser cut plywood fan kit for educational use. The thickness of the plywood is 2.8mm, the diameter of the fan head is 99mm, and the height of the fan is 128mm. The kit comes with a DC motor soldered with 20mm leads terminated with male pin header, and a 3-blade propeller. The DC...

$105.00  
5 pc(s)
Please Note: BBC micro:bit is NOT included. The BBC micro:bit is a pocket-sized computer that lets you get creative with digital technology. You can code, customize and control your micro:bit from anywhere! You can use your micro:bit for all sorts of unique creations, from robots...

$7.95  
49 pc(s)
This is the latest version of the popular HC-SR04 Low Cost Ultrasonic Sensor. Instead of the common GPIO interface, this version of HS-SR04 uses I2C to communicate with host controller. HC-SR04 ultrasonic sensor provides a very low-cost and easy method of distance measurement. It measures...

$39.90  
1 pc(s)
Please Note: BBC micro:bit is NOT included. The Kitronik Inventor's Kit for the BBC micro:bit is a great way to get started with programming and hardware interaction with the BBC micro:bit. This Inventor's Kit contains everything you need to complete 10 experiments including using LEDs,...

$16.50  
33 pc(s)
This KittenBot's IO:bit is a feature packed expansion board for the micro:bit. It breaks out all the IO pins (inputs, outputs) and adds extra hardware to make your next micro:bit project shine. The small form factor and two LEGO-compatible pin holes make it easy to fit into the project you might...

$52.50  
23 pc(s)
Let your robotic dreams come true with this Robotbit expansion board from KittenBot. This micro:bit add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors, and eight servos with full PWM control. It uses a fully-dedicated PWM driver chip onboard to handles all...

$21.90  
3 pc(s)
Add line following functionality to the Kitronik : MOVE mini for the BBC micro:bit with this easy to assemble add-on kit. This add-on comes with all the parts required to add line following functionality to the :MOVE mini and does not require any soldering. Once built, the sensitivity...

$69.00  
2 pc(s)
The Line Following Buggy with :MOVE line following board for the BBC microbit is the newest version of our very popular line following buggy. It features the :MOVE line following board and has fewer parts. Not only does it provide far superior line following it also makes the kit much easier...

$198.00  
2 pc(s)
Introducing Max:bot - an entry-level DIY robot that maximizes children's creativity. The Max:bot features a well designed aluminum structure Each kit comes with 10+ electronic modules, including motors, speakers, line trackers, distance sensors, gesture sensor,...

$9.50  
4 pc(s)
When assembled, the MI:power board is connected directly to the 3V, GND and P0 connections on the micro:bit. The 3V and GND connections provide power to the micro:bit and the built in buzzer is connected to P0, which is the default output pin when using the audio functions in the Block Editor...

$8.10  
2 pc(s)
Please Note: BBC micro:bit, MI:power board are NOT included. This case requires assembly. This case has been designed to protect a BBC micro:bit with the MI:power board . The case fully encloses both of the PCBs creating a rugged unit that is ideal for creating portable designs. The...

$7.50  
6 pc(s)
Please Note: BBC micro:bit, 2 x AAA Battery Cage and 2 x AAA Batteries are NOT included. This case requires assembly. The MI:pro Protector Case not only keeps a BBC micro:bit in perfect condition but also offers a number of other benefits. Keep your BBC micro:bit safe and secure with...

$39.00  
9 pc(s)
SGBotic has created a series of Micro:Bit EduFun Mini Project Kits with an aim of making advance devices available to micro:bit inventors. Much efforts have been devoted to designing the MakeCode block packages to remove the complexity of using these devices, making it easier for inventors to...

$22.40  
2 pc(s)
SGBotic has created a series of micro:bit EduFun Mini Project Kits with an aim of making advance devices available to micro:bit inventors. Much efforts have been devoted to designing the MakCode blocks package to remove the complexity of using these devices, making it easier for inventors to...

$25.95  
2 pc(s)
SGBotic has created a series of Micro:Bit EduFun Mini Project Kits with an aim of making advance devices available to micro:bit inventors. Much efforts have been devoted to designing the MakeCode block packages to remove the complexity of using these devices, making it easier for inventors to...

$25.00  
3 pc(s)
SGBotic has created a series of micro:bit EduFun Mini Project Kits with an aim of making advance devices available to micro:bit inventors. Much efforts have been devoted to designing the MakeCode block packages to remove the complexity of using these devices, making it easier for inventors to...

$12.00  
17 pc(s)
SGBotic has created a series of Micro:Bit EduFun Mini Project Kits with an aim of making advance devices available to micro:bit inventors. Much efforts have been devoted to designing the MakeCode block packages to remove the complexity of using these devices, making it easier for inventors to...

$95.00  
4 pc(s)
SGBotic has created a series of Micro:Bit EduFun Mini Project Kits with an aim of making advance devices available to micro:bit inventors. Much efforts have been devoted to designing the MakeCode block packages to remove the complexity of using these devices, making it easier for inventors to...

$32.50  
14 pc(s)
SGBotic has created a series of Micro:Bit EduFun Mini Project Kits with an aim of making advance devices available to micro:bit inventors. Much efforts have been devoted to designing the MakeCode block packages to remove the complexity of using these devices, making it easier for inventors to...

$18.00  
3 pc(s)
SGBotic has created a series of Micro:Bit EduFun Mini Project Kits with an aim of making advance devices available to micro:bit inventors. Much efforts have been devoted to designing the MakeCode block packages to remove the complexity of using these devices, making it easier for inventors to...

$21.50  
7 pc(s)
SGBotic has created a series of Micro:Bit EduFun Mini Project Kits with an aim of making advance devices available to micro:bit inventors. Much efforts have been devoted to designing the MakeCode block packages to remove the complexity of using these devices, making it easier for inventors to...

$32.50  
4 pc(s)
This micro:bit Flex Sensor is specifically designed for micro:bit to detect flexing or bending in one direction. They were popularized by being used in the Nintendo PowerGlove as a gaming interface. This sensors are easy to use. It will vary its resistance depending on how much it...

$15.55  
Out-of-stock
This micro:bit FSR Pressure Sensor is specifically designed for micro:bit to detect pressure. It includes a force sensitive resistor (FSR) with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The circuit...
Out-of-stock

$7.50  
12 pc(s)
This Piezo Knock Sensor is specifically designed for micro:bit to detect knock or vibration. It can be used in security or automation project by placing the Piezo element on a flat surface. When knock or vibration is detected, the sensor will generate an output voltage which can then be...

$39.95  
10 pc(s)
Micro:bit gamepad is an expansion gamepad based on micro:bit. You only need to plug in the micro:bit, it will turn into a wireless remote controller a wireless game console. This product packaged with acrylic plate, that giving it a good feel and no longer feels like a bare circuit...

$9.95  
2 pc(s)
Micro:Mate is a tiny micro:bit I/O expansion board for learning electronics and building DIY projects. It expands 6 sets of 3-pin I/O interfaces, capable of connecting servo motors, sensors and jumper wires. Additionally, Pin 8, 12, 16 support voltage switch between 3V-5V, allowing up to 5V...

$26.15  
46 pc(s)
Looking for a liquid pump for your plant watering project? This Mini Submersible Liquid Pump Kit comes with a miniature pump with driver board and battery pack for 2xAAA battery. The driver board is designed to operate between 3V to 6VDC supply. It works with PWM input, so you can increase or...

$7.50  
29 pc(s)
This miniature PIR sensor is designed for motion detection. It uses pyroelectric sensor to detect motion by measuring changes in the infrared levels emitted by surrounding objects. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything moves after that...

$23.90  
9 pc(s)
This board provides a simple way to add motor driving capability to a BBC micro:bit. It allows two motors to be driven with full forward, reverse & stop control. It has terminal blocks to connect four input devices and a regulated 3V supply is fed in to the 80 way connector to power the...

$7.50  
40 pc(s)
Please Note: BBC micro:bit is NOT included. This case requires assembly. Keep your BBC micro:bit safe by using this Mountable Protector Case for the BBC micro:bit. This case has been specifically designed with portability and expansion in mind. The clear casing allows the BBC...

$5.50  
5 pc(s)
This Light sensor module uses a photocell (LDR - Light Dependent Resistor) to detect the light intensity of the environment. As the resistance of the sensor varies depending on the amount of light it is exposed to, the output voltage changes with the light intensity.This module outputs analog...

$9.90  
7 pc(s)
The Protector Case not only keeps a BBC micro:bit in perfect condition but also offers a number of other benefits. It also can be stood neatly on a desk and provides full access to the bottom pins on the BBC micro:bit so the Edge Connector Breakout Board for BBC micro:bit can be used....

$9.95  
4 pc(s)
Note: BBC micro:bit is NOT included. The BBC micro:bit is everybody's favorite little controller: the last thing you want is for something bad to happen to it. Why not protect it with one of these adorable silicone cases? These cases protect the micro:bit from things like rogue...

$9.95  
3 pc(s)
Note: BBC micro:bit is NOT included. The BBC micro:bit is everybody's favorite little controller: the last thing you want is for something bad to happen to it. Why not protect it with one of these adorable silicone cases? These cases protect the micro:bit from things like rogue...

$9.95  
2 pc(s)
Note: BBC micro:bit is NOT included. The BBC micro:bit is everybody's favorite little controller: the last thing you want is for something bad to happen to it. Why not protect it with one of these adorable silicone cases? These cases protect the micro:bit from things like rogue...

$9.95  
3 pc(s)
Note: BBC micro:bit is NOT included. The BBC micro:bit is everybody's favorite little controller: the last thing you want is for something bad to happen to it. Why not protect it with one of these adorable silicone cases? These cases protect the micro:bit from things like rogue...

$9.95  
2 pc(s)
Note: BBC micro:bit is NOT included. The BBC micro:bit is everybody's favorite little controller: the last thing you want is for something bad to happen to it. Why not protect it with one of these adorable silicone cases? These cases protect the micro:bit from things like rogue...

$29.00  
4 pc(s)
The SparkFun gator:bit is an all-in-one "carrier" board for your micro:bit that provides you with a fully functional development and prototyping platform. Almost every pin on the micro:bit is broken out to pads that alligator (or crocodile, if you prefer) clips so you can get the most out of...

$23.90  
4 pc(s)
The SparkFun moto:bit is a fully loaded "carrier" board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional robotics platform. The moto:bit offers a simple, beginner-friendly robotics controller capable of operating a basic robotics chassis. Onboard...

$33.50  
156 pc(s)
This ubit:connect Interfacing Board is specially designed for BBC micro:bit developer. It offers an easy way to connect sensors, actuators and other circuits to the micro:bit. The board comes with an 0.91" OLED display. Together with SGBotic's customised makecode package, this OLED display...

$4.95  
705 pc(s)
USB 2.0 type A to micro USB 5-pin. This is a new, smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Micro USB is found on newer hand held devices like cell phones and portable media devices. Connector shape may vary slightly from image as our stock...

$3.80  
2 pc(s)
This is a USB 2.0 type A to Micro-B 5-pin black cable. You know, the mini-B connector that usually comes with cell phones, Cameras, MP3 players, etc. We specifically like these 15cm long cables because using USB peripherals in projects within a small enclosure is much easier these days, and...
1 2