Our office will be closed from 24th (Friday) to 27th (Monday) January 2020.

Development Boards

1 2
$118.00  
4 pc(s)
Phidgets are a set of "plug and play" building blocks for low cost USB sensing and control from your PC. All the USB complexity is taken care of by our robust API. Applications can be developed quickly in .NET, Visual Basic, VBA (Microsoft Access and Excel), LabView, Java, Delphi, C, C++ and...

$175.00  
1 pc(s)
The PhidgetEncoder Highspeed 4-Input can be used with a wide assortment of mechanical and optical encoders. The encoder should be of quadrature output type, indicating that there will be two quadrature output channels (usually labeled A and B) and an optional third output channel to signal...

$30.00  
2 pc(s)
Solid State Relays, or SSRs, are devices designed to operate like standard relays but without mechanical motion. The SSR Board is safe to use with sensitive control devices like microprocessors, and will not damage a Phidget device or your PC. Optoisolation between the control inputs and...

$16.90  
4 pc(s)
This Antenna Kit is meant for use with the LoPy , SiPy . But it's good for any 800MHz and 900MHz radio. Includes: External antenna. Interface Cable SMA to U.FL NOTE : Using the LoRa/Sigfox radio without the external antenna can lead to damage of the device and is...

$38.00  
Out-of-stock
The Arduino Dock R2 is a full Arduino Uno that allows your Omega2 to control the Arduino chip through a serial connection. It lets you to make use of all of your existing Arduino Shields and you can program it with the Arduino IDE, just like any other Arduino! We've also broken out the...
Out-of-stock

$16.80  
Out-of-stock
The BLE (Bluetooth Low Energy) Expansion for Omega is a USB-based expansion that adds Bluetooth 4.1 connectivity to your Omega so that it can interact with other Bluetooth-enabled devices. Features Compatible with iOS 5+, Android 4.3+. Supports master mode.
Out-of-stock

$19.00  
8 pc(s)
This Breadboard Dock For Omega is a small board that connects to Omega, and breaks the pins out to breadboard-friendly arrangement and spacing. The Breadboard Dock features a reset button, microB USB connector and 3.3V regulator, and fully assembled as shown. The Breadboard Dock has all the...

$19.90  
6 pc(s)
The STM32F3DISCOVERY helps you to discover the STM32 F3 series Cortex-M4 mixed-signals features and to develop your applications easily. It includes everything required for beginners and experienced users to get started quickly. Based on the STM32F303VCT6, it includes an ST-LINK/V2...

$114.00  
2 pc(s)
Do Androids dream of Electric Sheep? Well if not, they should. The Electric Sheep board is a development tool (similar to the Arduino Mega ADK) for creating custom Android accessories. Based on the ATMEGA2560-16AU and carrying the same bootloader as the Arduino Mega 2560, this board...

$4.90  
8 pc(s)
This ESP8266 WiFi Module Adapter allows easy interfacing of ESP8266 WiFi Module to Arduino Uno / Mega or any development board running on 5V logic. It features onboard LDO regulator to supply 3V to ESP8266 WiFi Module and logic level converter for both Tx and Rx pins. Note :...

$2.90  
9 pc(s)
This ESP8266 WiFi Module Breakout Board allows you to take the dual row header of the ESP-01 and make it breadboard friendly. This board comes with the header and decoupling capacitor presoldered, but requires you to solder on the male pins. NOTE : ESP8266 WiFi Module not included.

$8.90  
4 pc(s)
This module is a USB programmer for ESP8266 Wifi Module . The module is hard wired to automatically enter into download mode once the programmer is plugged into the USB port, there is no need to press any button on the programmer or wifi module. It is very convenient for users to download...

$9.90  
30 pc(s)
The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each...

$27.90  
21 pc(s)
The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Now get ready to take your bite-sized WiFi capabilities to the next level with the ESP32 Development Board! The...

$25.95  
Out-of-stock
The Ethernet Expansion adds an Ethernet port to your Omega. While the Omega is all about wireless connectivity, a reliable wired network connection can be a great addition to a project. Since the Omega is so flexible when it comes to networking, you can use the Ethernet Expansion to:...
Out-of-stock

$36.50  
4 pc(s)
This Pycom Expansion Board is compatible with both the LoPy , SiPy and the WiPy 2.0 and brings additional functionality to your IoT project. Simply insert the WiPy or LoPy into the headers and enjoy all the extra features! Specifications: USB and LiPo battery powered FT234XD USB to...

$28.00  
2 pc(s)
The Expansion Dock provides an easy way to power the Omega with any Micro USB cable and breaks out the Omega's GPIO pins. You can use them to control external circuits or connect Expansion boards to extend the functionality of your Omega. It also comes with an on-board USB-to-serial chip that...

$34.95  
6 pc(s)
Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather M0 Adalogger - an 'all-in-one' Cortex M0 datalogger (or data-reader)...

$25.00  
11 pc(s)
The FlexiForce Adapter makes it easy to interface a Tekscan FlexiForce Force Sensor to your microcontroller or PC. Just use the cable included with the adapter. We even give you a round plastic disc for the sensing pad. The FlexiForce sensor is an ultra-thin and flexible printed circuit,...

$50.75  
1 pc(s)
The GPS Expansion for the Onion Omega is a USB-based expansion that allows your Omega to pinpoint its location using both GPS as well as China's Beidou satellite positioning systems. It comes with an on-board GPS antenna as well as a built-in u.FL connector to attach your own antenna....

$5.20  
5 pc(s)
This holder allows you to safely secure a IOIO development board and a self-adhesive breadboard in place to easily run jumper wires in between the two to form simple or complex prototyping circuits. Unlike it’s cousin, for the Arduino, this IOIO and breadboard holder has been made...

$48.95  
3 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack Basic Development Kit is a ESP32-based WiFi microcontroller that's compatible MicroPython, Arduino, esp-idf and UIFlow graphic...

$59.95  
6 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack Gray Development Kit is a ESP32-based WiFi microcontroller that's compatible MicroPython, Arduino, esp-idf and UIFlow graphic...

$32.90  
10 pc(s)
M5Camera is a development board for digital image processing. It can be programmed for facial recognition, webcam or other image processing applicaton. It features an ESP32 chip with 4M Flash and 520K RAM, and a 2-Megapixel image sensor (OV2640). It also comes with 4 Mbyte PSRAM for extra...

$29.90  
7 pc(s)
M5Camera is a development board for digital image processing. It can be programmed for facial recognition, webcam or other image processing applicaton. It features an ESP32 chip with 4M Flash and 520K RAM, and a 2-Megapixel image sensor (OV2640). It also comes with 4 Mbyte PSRAM for extra...

$19.90  
10 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack Mini GPS Module is built around the AT6558 GNSS module. The 56-channel 6 positioning engine boasts a Time-To-First-Fix (TTFF) of...

$6.90  
8 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack Vibrator Motor Module produces vibrations by spinning an eccentric shaft at 8800 RPM when powered at 5V. It features a N20 DC motor and a...

$5.90  
10 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack Angle Module is a rotary switch Unit, simply having a 10K potentiometer inside. This unit can be used for Continuous singal dialing...

$9.90  
10 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack Color Module is built around the TCS3472. TCS3472 is probably one of the best color sensor on the market. It has RGB and Clear light...

$11.90  
8 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack Environmental Module is designed for sensing temperature, humidity and barometric pressure. It features two sensors - BMP280 for...

$13.90  
8 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack Heart Rate Module is built around the MAX30100. MAX30100 is a complete pulse oximetry and heartrate sensor system solution designed...

$4.90  
10 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack HUB Module is used for GROVE port expanding. It allows three I2C devices with unique address to connect to M5Stack Core. This HUB is...

$5.90  
10 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack Light Module uses photo cell to measure light intensity. The resistance of the photo cell depending on the amount of light it is...

$13.50  
10 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack PIR Module is designed for motion detection. It uses pyroelectric sensor to detect motion by measuring changes in the infrared...

$13.90  
7 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack RFID Module is built around the MFRC522. The MFRC522 operates in the 13.56MHz frequency band and uses the modulation and...

$10.90  
8 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack ToF Module is built around the VL53L0X. The VL53L0X is a Time of Flight distance sensor like no other you've used! The sensor...

$9.90  
10 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This 5V cooling fan helps to prevent your STEPMOTOR module from overheating when operate at maximum performance. The fan will stack to the...

$52.95  
9 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack GPS Module is built around the NEO-M8N GNSS module from ublox. The NEO-M8 modules utilize concurrent reception of up to three GNSS...

$18.90  
7 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This LoRa module is based on the Ra-02 LoRa®-enabled radio module from Ai-Thinker. The module permit long range connectivity for IoT devices...

$19.90  
10 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack Stackable Servo module is designed for quick prototyping of servo motor project. It can supports up to 12 servo motors. The on-board MEGA328...

$29.90  
9 pc(s)
M5Stack is a robust, Arduino compatible, open source development kit with stackable modules, enabling rapid and high-quality IoT prototyping. This M5Stack Stackable STEPMOTOR module is built around three units of DRV8825 stepper motor controllers. It is perfect for any motion project as it can...

$25.95  
42 pc(s)
The ESP-32-based M5Stack-C is a wee, super portable, open-source IoT development board, like a fun-sized version of the M5Stack . Jam-packed with a Wi-Fi & Bluetooth powered ESP32, USB interface, Li-Poly battery and charge circuitry, 0.96" color TFT display, various sensors (IR...

$12.90  
7 pc(s)
ENV HAT is a M5StackC compatible environmental sensor for sensing temperature, humidity, barometric pressure and geomagnetic. It consists of three sensors - BMM150 for geomagnetic sensing, BMP280 for barometric pressure sensing and DHT11 to measure temperature and humidity. Because...

$18.90  
10 pc(s)
NCIR HAT is a M5StackC compatible infrared temperature sensor. This HAT module Integrates MLX90614 which can be used to measure the surface temperature of a human body or other object. Unlike most temperature sensors, this sensor measures infrared light bouncing off of remote objects...

$5.90  
10 pc(s)
PIR HAT is a M5StackC compatible PIR Motion Sensor. This is a pyroelectric sensor that detects motion by measuring changes in the infrared levels emitted by surrounding objects. When the motion is detected, the sensor will output HIGH and last for two seconds until the next detecting...

$5.90  
8 pc(s)
SPK HAT is a M5StackC compatible speaker. This HAT module features a PAM8303 mono audio amplifier. PAM8303 is a class D amplifier, able to deliver up to 3 Watts into 4 ohm impedance speakers. Since the amp is a class D, its very efficient (over 90% efficient when driving an 8Ω speaker at...

$28.00  
3 pc(s)
The Mini Dock is designed to power your Omega for applications that do not require GPIO pins. Its small form factor makes it suitable to use for wireless applications such as Wi-Fi range extension, wireless printing, wireless video streaming, and more. The Mini Dock comes with a built-in USB...

$24.90  
15 pc(s)
NodeMcu is an open source LUA based IoT platform that enable you to p rototype your IoT product within a few Lua script lines. This development kit iincludes a CP2102 TTL to USB chip for programming and debugging, is breadboard-friendly, and can simply be powered via its micro USB...

$15.00  
28 pc(s)
The STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features. The Arduino™ connectivity support and ST Morpho...

$15.00  
26 pc(s)
The STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features. The Arduino™ connectivity support and ST Morpho...

$15.00  
27 pc(s)
The STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features. The Arduino™ connectivity support and ST Morpho...

$15.00  
21 pc(s)
The STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features. The Arduino™ connectivity support and ST Morpho...

$25.95  
Out-of-stock
The OLED Expansion adds a low-power 0.96″ monochrome display to your Omega. With a resolution of 128×64, you can use it to display text, images, and even animations. Very useful for displaying status information, web data, and small logos. If you're interested in writing text, 21...
Out-of-stock

$28.00  
3 pc(s)
Onion Omega2 Pulse is a Linux computer designed specifically for building connected hardware applications. It combines the tiny form factor and power-efficiency of the Arduino, with the power and flexibilities of the Raspberry Pi. The Omega2 has integrated Wi-Fi and on-board flash storage....

$99.80  
5 pc(s)
The PhidgetRFID Read-Write reads RFID tags that are brought in close proximity to the reader and returns the tag identification number. Writing data to T5577 tags is also supported. For a list of compatible RFID tags that we have available, see the Compatible Products tab. RFID (Radio...

$68.40  
1 pc(s)
The PicoBoard allows you to create interactions with various sensors. Using the Scratch programming language, you can easily create simple interactive programs based on the input from sensors. The PicoBoard incorporates a light sensor, sound sensor, a button and a slider, as well as 4...

$28.00  
5 pc(s)
The Power Dock allows you to use any 3.7V LiPo battery to power your Omega and then charge the battery when it's out of juice. It has the same form factor as the Expansion Dock and can also be used in the same way: no battery and receiving power through the Micro USB port. The Dock breaks out...

$45.50  
7 pc(s)
The Programming Fixture 32 is an innovative programming / testing tool specially designed for ESP-WROOM-32 or ESP-32S. It provides an efficient way to program and test the ESP32 module before soldering the module to the board. User just need to place the module on the fixture, flash the...

$45.50  
8 pc(s)
The Programming Fixture 8266 is an innovative programming / testing tool specially designed for ESP-07 , ESP-07S, ESP-12F and ESP-12S. It provides an efficient way to program and test the ESP8266 module before soldering the module to the board. User just need to place the module on the...

$8.50  
5 pc(s)
The Proto Expansion for the Onion Omega allows you to create your very own Expansion that interfaces with your Omega. It provides a small soldering area and 30-pin header that plugs into the Expansion Dock. With it you will have full control over what kind of project you design for your...

$68.50  
7 pc(s)
The SiPy from Pycom is a multi-network (Sigfox, WiFi and BLE) development platform. It's programmable with MicroPython and the Pymakr IDE for fast IoT application development, easy programming in-field and extra resilience with network failover. The best blend of speed to deployment and...

$42.50  
16 pc(s)
WiPy 2.0 is Pycom's updated enterprise grade IOT development platform. The tiny MicroPython enabled WiFi & Bluetooth IoT development platform. With a 1KM WiFi range, state of the art Espressif ESP32 chipset and dual processor, the WiPy is all about taking the Internet of Things to the...

$28.00  
3 pc(s)
The Relay Expansion enables your Omega to control two other, independent electrical circuits. The circuits are isolated from the Omega and can operate at much higher or lower voltages than the Omega. So you can control other circuits you've built or small household appliances rated up to 60W....
1 2