Browse by category

SGBotic Products
Arduino
BBC micro:bit
Raspberry Pi
STEAM
machine learning
Audio / MP3
Breakout Boards
Cables
Camera / Lenses
Components
Development Boards
E-Textiles
Instruments
LED / LCD
Power / Batteries
Programmers
Prototyping
RFID / NFC
Robotics / Hardware
Sensors
Tools
Wireless
School & Uni Packs

Robotics / Hardware

Roboteq
Robot Kits
MakerBeam
Motor Drivers
Motors / Servo
Mounts/Hubs
Others
Shafts
Pulleys and Belts
Pixhawk Autopilot
Wheels
1 2 3
Sort by Popularity
63 Per Page
Nylon Ball Caster Wheel
$1.20  
39 pc(s)
The Nylon Ball Caster has the capbility to support maximum 10kg payload. The Caster is strong and lightweight. It has 20mm high round body, with a total weight of only 25g. Documents : Dimension drawing
− +
Digital PWM Motor Speed Controller - 5A
$7.90  
2 pc(s)
This DC motor controller allows you to control both the speed and direction of a DC motor without sacrificing torque. It can provides up to a maximum continuous current of 5A to your DC motor or other DC load using a Pulse Width Modulated (PWM) with a Duty cycle fully adjustable from 10%-100%....
− +
3-Blade Nylon Boat Propeller - 40mm Diameter
$2.50  
11 pc(s)
Small fiber reinforced nylon propeller for boat, 3 blades and 40mm in diameter. It push fits directly onto our toy DC motor . Dimensions : Ø40 x 18.5mm Center bore：1.9 mm
− +
-25%
SparkFun Motor Driver - Dual TB6612FNG (with Headers)
$14.65 $19.55  
8 pc(s)
The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled,...
− +
Toy DC Motor Bracket - Plastic
$1.50  
13 pc(s)
This compact plastic bracket enables convenient mounting of our popular Toy DC Motors . Note: Toy DC motor not included. Documents : Dimension drawing
− +
600mm MakerBeam Clear Anodised (Threaded)
$9.50  
30 pc(s)
MakerBeam is a Mini-T open-source building system. Mini-T is a miniature version of T-slot (a technology that is widely used for industrial automation, robotics and machine enclosures.) Not only is it small enough to work as a model building system, but it's also precise and strong enough to...
− +
Toy DC Motor Bracket - Metal
$0.20  
9 pc(s)
This compact metal bracket enables convenient mounting of our popular Toy DC Motors . ‎Ø2mm mounting holes. Note: Toy DC motor not included.
− +
Timing Pulley - Shaft Mount (20T, 5mm Bore)
$2.50  
3 pc(s)
These shaft-mountable aluminum timing pulleys use 2GT timing belts and attach to a 5mm output shaft with a pair of set screw. They have 20 teeth with a gear pitch of 2mm, an outer diameter of 16mm, a bore of 5mm, and requires a belt width of 6mm. Specification Teeth: 20...
− +
T-Slot Nuts For MakerBeamXL (50pcs)
$17.50  
8 pc(s)
The MakerBeamXL T-slot nut is made of stainless steel and was specially designed to slide into the T-slot grooves of the MakerBeamXL profile. The T-slot nut is great to fasten brackets or corner cubes.
− +
Corner Cube Kit For MakerBeamXL - Black
$25.70  
3 pc(s)
This Corner Cubes can join up to three MakerBeamXL in right angle. Corner Cubes are joined with a beam by the threaded beam ends. Each set contains 12 15mmx15mmx15mm cubes Note : Not compatible with 10mmx10mm MakerBeam.
− +
Mini Lock-style Solenoid - 12VDC
$5.00  
8 pc(s)
Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This makes the solenoid able to pull from one end. This solenoid has a slug...
− +
-55%
3DR Safety Switch for PX4 / Pixhawk
$4.50 $9.90  
60 pc(s)
3D Robotics Safety Switch for PX4 / Pixhawk is a mandatory component of the Pixhawk autopilot system, allowing you to handle your vehicle safety by disabling the motors until you activate the switch. The safety switch features a three-position DF13 connector to connect directly to the...
− +
MakerBeam Bearing
$29.00  
8 pc(s)
Stainless steel bearing for the MakerBeam aluminum profile. The bearing is 5mm thick. The outside dimension of the bearing is 13mm. The iinside diameter measures 3mm. If you fit it to a MakerBeam it will extend about 1.5mm from the edge of the beam. The 3mm inner diameter makes is easy to...
− +
2WD Robot Chassis Kit
$19.80  
1 pc(s)
This 2WD Robot Chassis Kit is easy to assemble and use robot chassis platform. It provides you with everything you need to give your robot a fast two wheel drive platform with plenty of room for expansion to add various sensors and controllers (such as Arduino). All you need to do is...
− +
Mini Vacuum Pump - 6V
$9.99  
5 pc(s)
This mini vacuum pump operates at 6V and has enough suction for most small projects such as blood pressure monitors and automatic machine assembly. Features: Rated Voltage: 6VDC Rated Current: <420mA Inflation Time: <10 S (From 0 to 300 mmHg in a 500CC...
− +
MakerBeam Hinge Kit
$29.50  
11 pc(s)
1 bag of MakerBeam hinges kit contains 8 hinges and 4 axes (ISO7380, M3, 14mm, A2) and 4 self locking nuts (DIN985).The hinges were specially designed to make a hinge or to mount a beam at any angle you would like.
− +
Mini Liquid Pump - Horizontal (2.5V to 5VDC)
$2.95  
Out-of-stock
Looking for a battery powered liquid pump for your Micro:Bit project? This submersible Mini Liquid Pump operates between DC 2.5V to 5V. You can PWM the motor to speed up or slow down the flow rate. Works great with motor driver or a simple relay. This liquid pump does not come with...
Out-of-stock
MakerBeamXL - 1000mm Black Anodised (Threaded)
$15.50  
22 pc(s)
MakerBeamXL is a Mini-T open-source building system. Mini-T is a miniature version of T-slot (a technology that is widely used for industrial automation, robotics and machine enclosures.) Not only is it small enough to work as a model building system, but it's also precise and strong enough...
− +
Thin White Wheel for TT DC Gearbox Motors - 65mm Diameter
$1.95  
12 pc(s)
This Thin White Wheel For TT Gear Motor is equipped with a rubber tread with excellent traction, and a press-fit design to make connecting super quick and easy. Note : This wheel is only for use with TT gearbox motors . Wheel body: 65 x 18mm
− +
Adafruit DC Motor + Stepper FeatherWing Add-on
$36.75  
7 pc(s)
This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). It features a fully-dedicated PWM driver chip that handles all the motor and speed controls over I2C. Since the FeatherWing only...
− +
Bi-axial Gear Motor (1:143)
$3.50  
4 pc(s)
This bi-axial gear motor offers a cheap and easy-to-use setup to get your project moving. It possess a 80mm long output on a 3mm diameter hexagon axis. This gear motor requires a voltage of 1.5 to 6V with a no load current of 660mA while possessing a gearbox ratio of 1:134 and a wheel...
− +
-50%
Pulley For Toy Motorr - 17mm Diameter
$0.15 $0.30  
8 pc(s)
This plastic pulley can be used to drive wheels or other pulleys with 2mm diameter belt. They have an outer diameter of 17mm and is designed to fit the 2mm shafts and the output shaft on our DC toy motor . Wheel body: ø17 x 4mm
− +
Mini Lock-style Solenoid - 6VDC
$5.00  
10 pc(s)
Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This makes the solenoid able to pull from one end. This solenoid has a slug...
− +
TT Gear Motor All-Metal Gearbox - 1:90 Gear Ratio
$7.95  
12 pc(s)
These TT All-Metal Gear Motors are a low cost and reliable way to get your projects moving. They look a lot like our yellow all-plastic gear motors but these have all of the motor gears machined from steel, so they won't strip as easily, and they're twice as slow (and twice as powerful) given...
− +
Vibration Motor Module
$3.25  
16 pc(s)
This small vibratory motor module is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. The on-board MOSFET driver allows the module to interface directly to microcontroller. Features : Operating voltage:...
− +
MakerBeamXL - 500mm Black Anodised (Threaded)
$9.90  
13 pc(s)
MakerBeamXL is a Mini-T open-source building system. Mini-T is a miniature version of T-slot (a technology that is widely used for industrial automation, robotics and machine enclosures.) Not only is it small enough to work as a model building system, but it's also precise and strong enough...
− +
Low Speed Gearmotor - 5V 5rpm
$4.99  
3 pc(s)
This gear motor is designed to operate at extremely low speed of 5rpm at 5V. It can operate up to 9V and the rotation can start at voltage as low as 1.8V. Each gear motor sports a 5mm diameter double D-shaft metal output shaft with a M3 threaded hole in the middle. The wire lead is about 12cm...
− +
Timing Pulley - Shaft Mount (30T, 5mm Bore)
$4.50  
4 pc(s)
These shaft-mountable aluminum timing pulleys use 2GT timing belts and attach to a 5mm output shaft with a pair of set screw. They have 30 teeth with a gear pitch of 2mm, an outer diameter of 21.6mm, a bore of 5mm, and requires a belt width of 6mm. Specification Teeth: 30...
− +
Bi-axial Gear Motor (1:94)
$3.50  
1 pc(s)
This bi-axial gear motor offers a cheap and easy-to-use setup to get your project moving. It possess a 80mm long output on a 3mm diameter hexagon axis. This gear motor requires a voltage of 1.5 to 6V with a no load current of 400mA while possessing a gearbox ratio of 1:94 and a wheel...
− +
Wheel For Toy Motor and TT Motor - 44mm Diameter
$0.45  
4 pc(s)
This custom-designed plastic wheel has a rubber ring measuring 44mm in diameter and is designed to fit the 2mm shafts and the output shaft on our DC toy motor . It also has a slot for fitting onto our TT motor and comes with a mounting screw for secure attachment. Wheel body: ø44 x 7mm
− +
Small Wheel For Toy Motor - 28mm Diameter
$0.50  
8 pc(s)
This custom-designed plastic wheel has a rubber ring measuring 28mm in diameter and is designed to fit the 2mm shafts and the output shaft on our DC toy motor . Wheel body: ø28 x 3.8mm
− +
-50%
Pulley For Toy Motor and TT Motor - 30mm Diameter
$0.15 $0.30  
45 pc(s)
This plastic pulley can be used to drive wheels or other pulleys with 2mm diameter belt. They have an outer diameter of 30mm and is designed to fit the 2mm shafts and the output shaft on our DC toy motor . It also has a slot for fitting onto our TT motor and comes with a mounting screw for...
− +
MakerBeam Hinge Bearing
$32.50  
3 pc(s)
Hinge bearing for the MakerBeam aluminum profile. The bearing is 5mm thick. The outside dimension of the bearing is 13mm. The iinside diameter measures 3mm. The 3mm inner diameter makes is easy to mount on a M3 bolt. Trebuchet movement is possible with the added copper saddle band clips,...
− +
MakerBeam Servo Bracket
$7.90  
9 pc(s)
MakerBeam Servo bracket in stainless steel. Specially designed and made for the MakerBeam product range. Documents: Mechanical drawing
− +
Low Speed Gearmotor - 5V 10rpm
$4.99  
4 pc(s)
This gear motor is designed to operate at extremely low speed of 10rpm at 5V. It can operate up to 9V and the rotation can start at voltage as low as 1.5V. Each gear motor sports a 5mm diameter double D-shaft metal output shaft with a M3 threaded hole in the middle. The wire lead is about...
− +
Diaphragm Liquid Pump (6V to 12VDC)
$4.50  
10 pc(s)
Looking for a battery powered liquid pump? This non-submersible diaphragm liquid pump will operates between DC 6V to 12V. You can PWM the motor to speed up or slow down the flow rate. Works great with motor driver or a simple relay. Each diaphragm liquid pump comes with a pair of...
− +
Mini Servo / ESC Tester
$4.50  
1 pc(s)
The Mini Servo / ESC Tester allow the user to test and exercise servos and set up a mode without requiring the use of a transmitter and receiver. It is easy to use and can test most servo technical parameters. It allows the user to control a servo directly to determine its neutral position...
− +
Timing Pulley - Shaft Mount (36T, 5mm Bore)
$4.80  
2 pc(s)
These shaft-mountable aluminum timing pulleys use 2GT timing belts and attach to a 5mm output shaft with a pair of set screw. They have 36 teeth with a gear pitch of 2mm, an outer diameter of 25.4mm, a bore of 5mm, and requires a belt width of 6mm. Specification Teeth: 36...
− +
-50%
Shaft - Solid 2mm Diameter x 100mm
$0.10 $0.20  
12 pc(s)
These 100mm long steel shafts have a diameter of 2mm. These shafts are solid, which makes them an ideal choice for axles. They fit on the following wheel and pulley: Wheel: RBT-02709 RBT-02711 RBT-02713 Pulley: RBT-02714 RBT-02715...
− +
Low Current DC Toy Motor w/ Male Lead Wire
$2.20  
10 pc(s)
This is a small toy DC motor with a small circular shaft which measures about 9.4mm long. The motor has an operating voltage range of 1.5 to 4.5VDC and a no load speed of 7,500 RPM. It has very low no-load current of 0.09A at 3.0VDC. The motor is pre-soldered with ~200mm male pin lead...
− +
Roboclaw 2x15A Regenerative Motor Controller
$145.00  
Out-of-stock
The RoboClaw 2x15A is an intelligent motor controller designed to control two brushed DC motors at 15 Amps continuous with up to 30 Amps peak per channel. It can be controlled from USB, RC radio, PWM, TTL serial, analog and microcontrollers such as an Arduino or Raspberry Pi. RoboClaw...
Out-of-stock
Mecanum Wheels For TT Gear Motor - 80mm Diameter (PAIR)
$15.50  
1 pc(s)
Mecanum wheels allow your robot to not only travel forward and backward, but also sideways! Nine rollers set on a 45° rotational axis parallel to the main rotational axis of the wheel enable a broad a range of movement. Rotating all four wheels in the same direction causes forward or backward...
− +
Metal Bracket for Ø25mm Gearmotor
$4.50  
1 pc(s)
This aluminum gearmotor brackets let you securely mount 25D mm metal gearmotors to your project. Each bracket includes two M3 screws for securing the motor to the bracket.
− +
Small Wheel For Toy Motor - 17.5mm Diameter
$1.50  
14 pc(s)
This custom-designed plastic wheel has a rubber tire measuring 17.5mm in diameter and is designed to fit the 2mm shafts and the output shaft on our DC toy motor . Wheel body: ø17.5 x 6.5mm
− +
Timing Belt - 2GT (Length 852mm)
$8.50  
1 pc(s)
These are resistant 2GT sized timing belts that fit snug inside of these timing pulleys . Each belt is manufactured from wear resistant Polyurethane and high tensile steel cord to provide a fair ammount of strength and durability. The timing belts have a width of 6mm, a length of 852mm,...
− +
-50%
Shaft - Solid 2mm Diameter x 60mm
$0.10 $0.20  
12 pc(s)
These 60mm long steel shafts have a diameter of 2mm. These shafts are solid, which makes them an ideal choice for axles. They fit on the following wheel and pulley: Wheel: RBT-02709 RBT-02711 RBT-02713 Pulley: RBT-02714 RBT-02715...
− +
Corner Cube Kit For MakerBeamXL - Clear
$25.70  
2 pc(s)
This Corner Cubes can join up to three MakerBeamXL in right angle. Corner Cubes are joined with a beam by the threaded beam ends. Each set contains 12 15mmx15mmx15mm cubes Note : Not compatible with 10mmx10mm MakerBeam.
− +
-22%
3-Blade Propeller - 50mm Diameter
$0.35 $0.45  
37 pc(s)
Small 3 blade propeller, 50mm in diameter. It push fits directly onto our toy DC motor . Dimensions : Ø50 x 11.6mm Center bore：1.9 mm
− +
-50%
Shaft - Solid 2mm Diameter x 80mm
$0.10 $0.20  
19 pc(s)
These 80mm long steel shafts have a diameter of 2mm. These shafts are solid, which makes them an ideal choice for axles. They fit on the following wheel and pulley: Wheel: RBT-02709 RBT-02711 RBT-02713 Pulley: RBT-02714 RBT-02715...
− +
Low Speed Gearmotor - 3V 6rpm
$4.99  
Out-of-stock
This gear motor is designed to operate at extremely low speed of 6rpm at 3V. It can operate up to 6V and the rotation can start at voltage as low as 1.5V. Each gear motor sports a 5mm diameter double D-shaft metal output shaft with a M3 threaded hole in the middle. The wire lead is about 12cm...
Out-of-stock
-50%
Shaft - Solid 2mm Diameter x 110mm
$0.10 $0.20  
5 pc(s)
These 110mm long steel shafts have a diameter of 2mm. These shafts are solid, which makes them an ideal choice for axles. They fit on the following wheel and pulley: Wheel: RBT-02709 RBT-02711 RBT-02713 Pulley: RBT-02714 RBT-02715...
− +
Timing Belt - 2GT (Length 110mm)
$4.70  
5 pc(s)
These are resistant 2GT sized timing belts that fit snug inside of these timing pulleys . Each belt is manufactured from wear resistant Polyurethane and high tensile steel cord to provide a fair ammount of strength and durability. The timing belts have a width of 6mm, a length of 110mm,...
− +
MakerBeamXL - 1000mm Clear Anodised (Threaded)
$15.50  
27 pc(s)
MakerBeamXL is a Mini-T open-source building system. Mini-T is a miniature version of T-slot (a technology that is widely used for industrial automation, robotics and machine enclosures.) Not only is it small enough to work as a model building system, but it's also precise and strong enough...
− +
Orange and Clear Wheel for Bi-axial Gearbox Motor - 70mm Diameter
$2.50  
10 pc(s)
Need a wheel for your Bi-axial Gear Motor ? This Orange & Clear TT Motor Wheel is equipped with a nice, thick silicone tread and a press-fit design to make connecting super quick and easy. Make cute robots today with a couple of these orange wheels! Note : This wheel is only...
− +
Right Angle Bracket For MakerBeamXL (12 pcs)
$15.50  
7 pc(s)
The stainless steel right angle bracket is a great addition to MakerBeamXL product range. The right angle brackets give you the possibilty to place one beam on top of the other. Includes 12x Stainless steel right angle bracket for MakerBeamXL
− +
Timing Belt - 2GT (Length 1220mm)
$9.90  
4 pc(s)
These are resistant 2GT sized timing belts that fit snug inside of these timing pulleys . Each belt is manufactured from wear resistant Polyurethane and high tensile steel cord to provide a fair ammount of strength and durability. The timing belts have a width of 6mm, a length of 1220mm,...
− +
-50%
Wheel Encoder Kit
$9.95 $19.95  
10 pc(s)
The simple encoder kit from consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensors terminated with 150mm (6inch) cable and 3 pin female servo headers. The magnets have 4 north poles and 4 south poles and are strong enough that the sensor can detect the poles from...
− +
4-Blade Propeller - 80mm Diameter
$0.80  
6 pc(s)
Small 4 blade propeller, 80mm in diameter. It push fits directly onto our toy DC motor . NOTE: Toy DC motor not included. Dimensions : Ø80 x 12.8mm Center bore：1.9 mm
− +
SGBotic EduFun Buggy for Micro:bit (rev.B)
$59.95  
Out-of-stock
SGBotic EduFun Buggy for Micro:bit is designed for learning basic robotics using BBC Micro:bit and MakeCode graphical programming. Although this kit is targeted for beginners with no prior robotic experience, experienced users will find it useful and fun too. The kit includes all parts required...
Out-of-stock
-50%
Shaft - Solid 2mm Diameter x 75mm
$0.10 $0.20  
2 pc(s)
These 75mm long steel shafts have a diameter of 2mm. These shafts are solid, which makes them an ideal choice for axles. They fit on the following wheel and pulley: Wheel: RBT-02709 RBT-02711 RBT-02713 Pulley: RBT-02714 RBT-02715...
− +
4-Blade Propeller - 56mm Diameter
$0.50  
Out-of-stock
Small 4 blade propeller, 56mm in diameter. It push fits directly onto our toy DC motor . NOTE: Toy DC motor not included. Dimensions : Ø56 x 10.8mm Center bore：1.9 mm
Out-of-stock
-50%
Swivel Caster Wheel
$0.75 $1.50  
57 pc(s)
This Swivel Caster Wheel is perfect for use with 2-wheeled robots that need a third-point of support. The nylon wheel comes attached to a metal plate and with M4 screw holes for fastening to any robot or project. It can rotate a full 360° on the plate and the sleek silver metal look suits any...
− +
-50%
Shaft - Solid 2mm Diameter x 30mm
$0.10 $0.20  
14 pc(s)
These 30mm long steel shafts have a diameter of 2mm. These shafts are solid, which makes them an ideal choice for axles. They fit on the following wheel and pulley: Wheel: RBT-02709 RBT-02711 RBT-02713 Pulley: RBT-02714 RBT-02715...
− +
1 2 3