Raspberry Pi

1 2 3 4
$13.00  
5 pc(s)
This is a 16GB UHS-I microSD card pre-installed with latest Raspberry Pi Linux distribution "Raspbian". Since this is a UHS-I microSD it is capable of transferring data at speeds up to 96MB/s allowing it to have a noticeable increase in performance while running an on-board OS. We test...

$49.95  
9 pc(s)
The Raspberry Pi Display Module Kit is designed to provide a quick and easy interface to Raspberry Pi without any wiring hassles. It features a fully assembled 3.5 inches 480x320 high resolution LCD display with resistive touchscreen, engineered specifically to let you quickly attached the...

$6.50  
477 pc(s)
This Rainbow Wire provides a convenient way to connect the signals in your projects. You can always pull the rainbow wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses. The color-coding can be used to organize power, ground and other signal types...

$79.50  
13 pc(s)
The Raspberry Pi Display Module Kit is designed to provide a quick and easy interface to Raspberry Pi without any wiring hassles. It features a fully assembled 5 inches 800x480 high resolution LCD display with resistive touchscreen and a HDMI adapter, engineered specifically to let you...

$12.00  
230 pc(s)
Need a USB jack for charging or powering a project, but don't want to lug around a computer? This switching supply gives a clean regulated output at up to 2.5A! This adapter has a standard USB 'A' connector for the output so you can power your Arduino, Raspberry Pi, etc. through a USB...

$118.00  
15 pc(s)
This 7" high resolution LCD display is designed to provide a quick and easy interface to Raspberry Pi 2 / Pi 3 / Pi 4 and other mini PC such as BeagleBone Black, Banana Pi and PC running on Windows 7/8/10. It features a fully assembled 7" 1024x600 IPS high resolution LCD screen with...

$165.00  
Out-of-stock
This 7" high resolution LCD display is designed to provide a quick and easy interface to Raspberry Pi and other mini PC such as BeagleBone Black, Jetson Nano Development Kit and PC running on Windows 7/8/10. It features a fully assembled 7" 1024x600 IPS high resolution LCD screen with...
Out-of-stock

$33.85  
2 pc(s)
The Raspberry Pi is a wonderful little computer, but one thing it isn't very good at is controlling DC Servo Motors - these motors need very specific and repetitive timing pulses to set the position. Instead of asking the Pi Linux kernel to send these signals, pop on this handy HAT! It adds...

$24.90  
6 pc(s)
The two-piece design aluminium enclosures with cooling fan are designed to protect your Raspberry Pi 4 in rugged environments. These compact and robust enclosures are for serious users in industrial applications, or those who want an especially good looking case for their Raspberry Pi 4....

$4.00  
15 pc(s)
These tiny little aluminium heatsinks is a perfect solution to keep the Raspberry Pi 4 running cool. The heatsink includes thermal adhesive tape for better heat dissipation. The installation is simple, what you need to do is to remove the heatsink protection and stick it on the IC.

$1.50  
6 pc(s)
This tiny little aluminium heatsink is a perfect solution for cooling off small surface-mount components such as CPUs on Raspberry Pi or stepper motor driver. The heatsink includes thermal adhesive tape for better heat dissipation. The installation is simple, what you need to do is to remove...

$1.50  
2 pc(s)
This tiny little aluminium heatsink is a perfect solution for cooling off small surface-mount components such as CPUs on Raspberry Pi or stepper motor driver. The heatsink includes thermal adhesive tape for better heat dissipation. The installation is simple, what you need to do is to remove...

$1.50  
13 pc(s)
This tiny little aluminium heatsink is a perfect solution for cooling off small surface-mount components such as CPUs on Raspberry Pi or stepper motor driver. The heatsink includes thermal adhesive tape for better heat dissipation. The installation is simple, what you need to do is to remove...

$13.50  
2 pc(s)
This Pi T-Expansion Kit comes with a small board that connects to the 40-pin GPIO connector on the Raspberry Pi B+ and Pi2 /3 /3+, and breaks the pins out to breadboard-friendly arrangement and spacing. The Kit comes with a 40 pin ribbon cable, and an already soldered T-Expansion as shown....

$13.50  
13 pc(s)
This Pi T-Expansion Kit comes with a small board that connects to the 40-pin GPIO connector on the Raspberry Pi B+ and Pi2 /3 /3+, and breaks the pins out to breadboard-friendly arrangement and spacing. The Kit comes with a 40 pin ribbon cable, and an already soldered T-Expansion as shown....

$13.50  
11 pc(s)
This Pi T-Expansion Kit comes with a small board that connects to the 40-pin GPIO connector on the Raspberry Pi, and breaks the pins out to breadboard-friendly arrangement and spacing. The Kit comes with a 40 pin ribbon cable, and an already soldered T-Expansion as shown. The PCB has all the...

$16.00  
28 pc(s)
This is a handy little USB Bluetooth 4.0 dongle. Utilising the CSR8510 chipset, this dongle is backwards compatible with v2.1 and earlier, but also supports the latest v4.0 low energy bluetooth transmission. It has a maximum distance of up to 50m and includes an indicator LED. Use this Dongle...

$7.90  
4 pc(s)
The Raspberry Pi Zero comes equipped with a special mini camera port which is smaller than the standard connector for the Pi Camera. So how do you connect to it? This little cable will sort you right out! Just plug it into your Pi Zero's camera port and then the other end into one of the Pi...

$8.90  
4 pc(s)
The Raspberry Pi Zero comes equipped with a special mini camera port which is smaller than the standard connector for the Pi.Camera. So how do you connect to it? This little cable will sort you right out! Just plug it into your Pi Zero's camera port and then the other end into one of the Pi...

$5.90  
4 pc(s)
The Raspberry Pi Zero comes equipped with a special mini camera port which is smaller than the standard connector for the Pi.Camera. So how do you connect to it? This little cable will sort you right out! Just plug it into your Pi Zero's camera port and then the other end into one of the Pi...

$3.95  
7 pc(s)
This tiny little orange heatsink is a perfect solution for cooling off small surface-mount components such as CPUs on Raspberry Pi or stepper motor driver. It is made of copper for better heat dissipation. The heatsink also includes thermal adhesive tape to clamp down securely and create a...

$38.00  
2 pc(s)
Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. Since the Raspberry Pi does not have a lot of PWM pins, this HAT uses...

$24.95  
5 pc(s)
This is a Raspberry Pi DC motor driver board with on-board encoder interface, which can drive 2-way DC motor and DC motor with encoder. It communicates with Raspberry Pi via I2C, easy to configure and drive motors. The DC Motor Driver HAT adopts STM32 micro processor to analyze the command...

$25.00  
4 pc(s)
This motor driver expansion board and its corresponding Python library make it easy to control a pair of bidirectional, brushed DC motors with a compatible Raspberry Pi (Model B+ or newer), including the Pi 3 Model B+ and Model A+. The expansion board features two MAX14870 H-bridge motor...
1 2 3 4