Loading...
Home>Development Tools

Development Tools

View as:  List
Sort by:  Default
1018 - PhidgetInterfaceKit 8/8/8 (Revision 2)

SKU: DEV-00144

$118.00
Phidgets
Phidgets are a set of "plug and play" building blocks for low cost USB sensing and control from your PC. All the USB complexity is taken care of by our... More
2 Unit(s)
3004 - Phidgets Sensor Cable 350

SKU: DEV-00148

$4.50
Phidgets
350cm (140") Sensor Cable for the analog input on the Phidget Interface Kit 8/8/8.
2 Unit(s)
1101 - Phidgets Sharp IR Distance Adapter

SKU: DEV-00210

$24.50
Phidgets
The IR Distance Sensor is designed to interface the following Sharp infra-red sensor to the PhidgetInterface board.. GP2D120XJ00F GP2D15... More
1 Unit(s)
LilyPad Tri-Color LED

SKU: DEV-00550

$9.60
Sparkfun Electronics
Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color.... More
1 Unit(s)
LilyPad Buzzer

SKU: DEV-00558

$10.35
Sparkfun Electronics
This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O... More
1 Unit(s)
LilyPad Light Sensor

SKU: DEV-00559

$9.60
Sparkfun Electronics
This is a simple to use light sensor that outputs an analog value from 0 to 5V. With exposure to daylight, this sensor will output 5V. Covering the sensor... More
3 Unit(s)
LilyPad Button Board

SKU: DEV-00562

$1.80
Sparkfun Electronics
We designed this board to give the user a very discrete button without any sharp edges. Button closes when you push it and opens when you release... More
3 Unit(s)
LilyPad Temperature Sensor

SKU: DEV-00563

$6.20
Sparkfun Electronics
Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees... More
1 Unit(s)
LilyPad Arduino 328 Main Board

SKU: DEV-00564

$26.50
Sparkfun Electronics
This is LilyPad Arduino - the main board consisting of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as... More
5 Unit(s)
LilyPad Accelerometer ADXL335

SKU: DEV-00565

$30.10
Sparkfun Electronics
This is a three axis accelerometer for the LilyPad system. Based on the ADXL335 accelerometer from Analog Devices, the LilyPad Accelerometer can detect... More
3 Unit(s)
2005 - Phidget Interface Kit Package #1

SKU: DEV-00640

$210.00
Phidgets
Phidgets are a set of "plug and play" building blocks for low cost USB sensing and control from your PC. All the USB complexity is taken care of... More
1056 - PhidgetSpatial 3/3/3

SKU: DEV-00675

$240.00
Phidgets
The 1056 - PhidgetSpatial 3/3/3 measures static and dynamic acceleration in 3 axes, up to 5g.; it also measures magnetic field in 3-axes up to ±4... More
1 Unit(s)
LilyPad Vibe Board

SKU: DEV-00688

$20.65
Sparkfun Electronics
Apply 5V and be shaken by this small, but powerful vibration motor. Works great as an physical indicator without notifying anyone but the wearer. LilyPad... More
2 Unit(s)
Magnetic Snap 18mm

SKU: DEV-00690

$2.30
Sparkfun Electronics
A snap is fun, but a magnetic snap adds a whole new layer of possibilities. This are relatively large 18mm diameter snaps (all three pieces come as shown).... More
5 Unit(s)
Coin Cell Holder - Sewable SMD

SKU: DEV-00692

$1.70
Sparkfun Electronics
This is a coin cell holder for the common CR2032 type battery. The holder has a neat pop-in, pop-out feature that makes changing the battery easy. The feet... More
5 Unit(s)
LilyPad XBee

SKU: DEV-00693

$18.00
Sparkfun Electronics
The is a breakout board for the popular XBee modules. Board includes easy-to-sew tabs and all the necessary power regulation to run on the LilyPad system.... More
1 Unit(s)
LilyPad Protoboard Large

SKU: DEV-00694

$9.50
Sparkfun Electronics
This is a large board for prototyping through hole components with the LilyPad system. There are an array of pins all shorted together with 10mil traces.... More
5 Unit(s)
LilyPad Protoboard Small

SKU: DEV-00695

$2.30
Sparkfun Electronics
This is a small board for prototyping through hole components with the LilyPad system. There are an array of pins all shorted together with 10mil traces.... More
3 Unit(s)
LilyPad Slide Switch

SKU: DEV-00696

$5.70
 This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. LilyPad is a wearable... More
5 Unit(s)
1111 - Motion Sensor

SKU: DEV-00723

$68.00
Phidgets
PRICE LISTED ONLY FOR EX-STOCK!!! The 1111 detects changes in infrared radiation that occur when there is movement by a person (or object), which... More
1 Unit(s)
Netduino

SKU: DEV-00764

$49.50
The Netduino is an open source electronics platform using the .NET Micro Framework. It features a 32-bit microcontroller and a rich development... More
5 Unit(s)
PICAXE USB Programming Cable

SKU: PGM-00776

$45.50
If you're looking to play with PICAXE microcontrollers on a computer with only USB, look no further! The PICAXE USB programming cable allows PICAXE micros... More
PICAXE 28 Pin 28x2 Microcontroller

SKU: DEV-00779

$17.60
PICAXE 28 pin microcontroller chip. Enhanced PICAXE28 chips with 8x memory and many additional features such as I2C bus support. PICAXE is a neat... More
5 Unit(s)
PICAXE 40x2 Microcontroller (40 pin)

SKU: DEV-00780

$17.70
The PICAXE X2 microcontrollers are the second generation of PICAXE chips; providing more features and greater flexibility. With the PICAXE 40x2,... More
5 Unit(s)
Maple

SKU: DEV-00932

$68.00
In the past, ARM processors were notoriously unfriendly in non-professional environments due to proprietary tool chains and unfamiliar instruction sets.... More
ATmega328 with Arduino Optiboot (Uno)

SKU: DEV-00943

$7.80
The name says it all on this one. An ATmega328 in DIP package, pre-loaded with the Arduino (16MHz) Bootloader. This will allow you to use Arduino code in... More
10 Unit(s)
ProtoScrewShield

SKU: DEV-00953

$19.80
The ScrewShield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield ,... More
4 Unit(s)
FTDI Basic Breakout - 5V

SKU: DEV-00968

$19.70
This is the newest revision of the  FTDI Basic . We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality... More
17 Unit(s)
2002 - PhidgetRFID Kit - 125kHz

SKU: DEV-01013

$145.00
Phidgets
The PhidgetRFID reads RFID tags that are brought in close proximity to the reader and returns the tag identification number. RFID (radio frequency... More
3 Unit(s)
LCD Add-On for Sparkfun Inventor's Kit (SIK)

SKU: DEV-01024

$19.50
Nothing is cooler than visual feedback for a project. Well, there are cooler things, but just go with it. This is an add-on to the SparkFun Inventor's Kit... More
5 Unit(s)
DFRduino Nano USB Microcontroller

SKU: DEV-01050

$39.90
The DFRobot's DFRduino Nano USB Microcontroller is a breadboard ready version of the Arduino Mini with integrated USB. The Nano... More
DFRobot I/O Expansion Board for Arduino

SKU: DEV-01052

$26.50
This latest DFRobot I/ Expansion Board for Arduino v5 is now supporting Xbee. It combines manufacturer's popular Xbee shield with IO... More
6 Unit(s)
DFRobot LCD Keypad Shield for Arduino

SKU: DEV-01057

$25.00
The DFRobot LCD Keypad Shield for Arduino includes a 2x16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8,... More
9 Unit(s)
Electric Sheep

SKU: DEV-01068

$114.00
Do Androids dream of Electric Sheep? Well if not, they should. The Electric Sheep board is a development tool (similar to the Arduino Mega ADK) for... More
2 Unit(s)
Conductive Thread Bobbin - 30ft

SKU: DEV-01074

$4.60
This is 30 feet of conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This... More
3 Unit(s)
PICAXE 08M2 Microcontroller (8 pin)

SKU: DEV-01075

$4.90
PICAXE-08M microcontroller chip. Supports 5 input/outputs including 3 analogue inputs. PICAXE is a neat entry-level microcontroller system that is... More
10 Unit(s)
PhoneDrone Board for Android

SKU: UAV-01079

$159.90
We're calling it the "PhoneDrone board for Android", and it's a way to connect any Android device (2.3.4 or higher) to the world of RC and UAVs.The board... More
1 Unit(s)
Arduino Ethernet Shield R3

SKU: DEV-01087

$53.00
NOTE:  The R3 version brings to this shield the 1.0 standard pinout that consist in 4 additional pins: 2 of them placed near the AREF pin, that are... More
79 Unit(s)
LiPower Shield

SKU: DEV-01090

$45.00
Is there anything an Arduino can't do? Well, for one, most of them can't be powered directly from a 3.7V LiPo battery; much less charge and monitor that... More
1 Unit(s)
Serial Cable for iOS Devices

SKU: DEV-01103

$79.90
The Redpark Serial Cable connects iOS devices to RS-232 serial devices. It is designed for use with iPhone 4, iPhone 3GS, iPod touch (fourth generation),... More
AVR ISP Shield - PTH Kit

SKU: DEV-01115

$29.90
Did you know that your Arduino can spawn other Arduinos? Don't worry, it can't do it autonomously so you won't wind up with a replicator situation (-gate,... More
2 Unit(s)
VoiceBox Shield

SKU: DEV-01116

$58.70
The VoiceBox Shield can be mounted on top of your Arduino board to give it access to all of the capabilities of the  SpeakJet  voice and sound... More
RFM22 Shield

SKU: DEV-01117

$44.50
The RFM22 is a low-cost ISM FSK transceiver module which offers communication at 433MHz ISM and adjustable output power of up to +20 dBm. What does that... More
CMUcam4 - Assembled

SKU: CAM-01126

$130.00
Computer vision is seriously cool technology but it takes a lot of processing power, it'd be nice to give your next microprocessor project the power to... More
2 Unit(s)
NTSC/PAL (Television) TFT Display - 2.36" Diagonal

SKU: CAM-01127

$65.00
This small OEM module has a TFT 2.36 "color" OEM "with automatic PAL / NTSC. Designed for integrators, it has a wide power supply range (5 to 12 VDC) and... More
7 Unit(s)
FTDI Basic Breakout 3.3/5V

SKU: DEV-01141

$19.70
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and... More
9 Unit(s)
PICAXE 20M2 Microcontroller (20 pin)

SKU: DEV-01148

$12.00
This is the PICAXE-20M2 microcontroller chip. PICAXE is a neat entry-level microcontroller system that is relatively cheap to get started with. The chip... More
1 Unit(s)
Arduino Leonardo (with headers)

SKU: DEV-01151

$30.80
The Leonardo is the newest in the Arduino family. Using the ATmega32U4 as its sole microcontroller allows it to be cheaper and simpler. Code libraries... More
29 Unit(s)
ProtoSnap - LilyPad Development Board

SKU: DEV-01154

$77.00
The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single board, which makes it easy to... More
Arduino Mega Android Accessory Development Kit (ADK) Board - R3

SKU: DEV-01157

$95.00
The Arduino ADK is a microcontroller board based on the  ATmega2560. It has a USB host interface to connect with Android based phones, and a power... More
10 Unit(s)
Fio v3 - ATmega32U4

SKU: DEV-01170

$48.90
The Fio v3 is a new spin on the Arduino Fio hardware powered by the ATmega32U4. While the Fio v3 is not yet compatible with the Arduino v1.0 IDE, it's... More
1 Unit(s)
DFRobot Romeo All-in-one Microcontroller (ATMega 328) Rev 2

SKU: RBT-01184

$57.50
The DFRobot Romeo All-in-one Microcontroller (ATMega 328) is based on the ATMega328 chip and designed as an extension of the basic Arduino board.... More
6 Unit(s)
1A Motor Shield For Arduino

SKU: DEV-01186

$25.00
This Motor shield  for Arduino uses L293 chip which allow to drive two 7-12V DC motors with maximum 1A current. This shield can be directly mount onto... More
6 Unit(s)
sgBotic Arduino Lab Kit

SKU: DEV-01189

$59.00
This Arduino Lab Kit is designed for teaching of Arduino in schools. The Arduino Uno R3 is secured on the clear acrylic plate with screws and metal... More
Rainbowduino LED Driver w/ Atmega 328

SKU: DEV-01212

$45.00
The Rainbowduino board (V3.0) is an Arduino compatible controller board with professional multiplexed LED driver. It can drive a 8x8 RGB Led Matrix or a... More
2 Unit(s)
LilyPad Arduino Simple Board

SKU: DEV-01217

$27.90
This is the LilyPad Arduino Simple Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the  LilyPad Arduino... More
2 Unit(s)
Netduino Plus

SKU: DEV-01218

$99.40
The Netduino Plus is an open source electronics platform using the .NET Micro Framework. The board features a 32-bit microcontroller and a rich development... More
3 Unit(s)
Netduino Mini

SKU: DEV-01219

$39.90
The Netduino Mini is an open source electronics platform using the .NET Micro Framework. It features a 32-bit microcontroller (the same one used in the... More
3 Unit(s)
Netduino Go! Starter Pack

SKU: DEV-01220

$142.90
Netduino Go has four times the speed (168MHz), six times the code space (384KB), and twice the available RAM (100KB+) of Netduino Plus. And with Netduino... More
Arduino Ethernet w/o PoE

SKU: DEV-01224

$82.50
So you want your Arduino to surf the web but you don't have room for the Arduino board plus the Ethernet Shield. What do you do? How about giving the... More
6 Unit(s)
Arduino WiFi Shield

SKU: DEV-01225

$122.00
The Arduino  WiFi  Shield allows an Arduino board to connect to the internet using the 802.11 wireless specification ( WiFi ). It is based on... More
83 Unit(s)
ublox LEA-5H GPS Shield

SKU: DEV-01232

$127.50
The LEA-5H is a high performance stand-alone GPS and GALILEO receiver module designed to allow easy, straightforward migration from its LEA-4 predecessors.... More
1 Unit(s)
Breakout Kit for Raspberry Pi

SKU: DEV-01247

$14.50
Now that you've finally got your hands on a  Raspberry Pi®  , you're probably itching to make some fun embedded computer projects with it.... More
12 Unit(s)
USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi

SKU: DEV-01248

$17.50
The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a... More
7 Unit(s)
Miniature WiFi (802.11b/g/n) Module: For Raspberry Pi and more

SKU: DEV-01249

$22.50
Make your Internet of Things device cable-free by adding WiFi. Take advantage of the Raspberry Pi and Beagle Bone's USB port to add a low cost, but... More
12 Unit(s)
PN532 NFC/RFID Controller Shield for Arduino

SKU: DEV-01250

$65.50
We've taken our popular Adafruit PN532 breakout board and turned it into a shield - the perfect tool for any 13.56MHz RFID or NFC application. The Adafruit... More
4 Unit(s)
FlexiForce Adapter

SKU: DEV-01269

$25.00
The FlexiForce Adapter makes it easy to interface a Tekscan FlexiForce Force Sensor to your microcontroller or PC. Just use the cable included with the... More
12 Unit(s)
3052_0 - SSR Relay Board

SKU: DEV-01270

$30.00
Solid State Relays, or SSRs, are devices designed to operate like standard relays but without mechanical motion. The SSR Board is safe to use with... More
2 Unit(s)
Makey Makey - Standard Kit

SKU: DEV-01271

$68.50
You may be the greatest living banana-pianist, but how will you ever know if you don't make yourself a banana piano? Good news, that project and countless... More
Bluetooth & LiPo Add-On for Makey Makey

SKU: WIR-01272

$58.50
The MaKey MaKey is really cool, but wouldn't it be cooler if it wasn't tethered to your computer? There's only one way to find out: Go wireless. Our... More
Prototyping Pi Plate Kit for Raspberry Pi

SKU: DEV-01276

$26.50
Now that you've finally got your hands on a  Raspberry Pi®  , you're probably itching to make some fun embedded computer projects with it.... More
5 Unit(s)
Low-profile microSD card adapter for Raspberry Pi

SKU: DEV-01277

$9.90
Make your Pi a little slimmer with this microSD card adapter board. It slides in where the SD card goes but is half the length. Pop in a microSD card for a... More
7 Unit(s)
Arduino Due (32bit ARM)

SKU: DEV-01278

$71.00
The Due is Arduino's first ARM-based Arduino development board. This board is based on a powerful 32bit CortexM3 ARM microcontroller made programmable... More
33 Unit(s)
Pi Tin for the Raspberry Pi

SKU: PRO-01293

$14.50
The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it. Why not protect it with one... More
2 Unit(s)
Sensor Kit

SKU: DEV-01326

$259.00
Want to start playing with sensors, but don't know where to start? This kit includes a sensor for just about every job. With everything included in this... More
1 Unit(s)
Raspberry Pi - Model B

SKU: DEV-01333

$49.90
Who wants pi? The Raspberry Pi has made quite a splash since it was first announced. The credit-card sized computer is capable of many of the things that... More
2 Unit(s)
IOIO-OTG

SKU: DEV-01337

$57.90
Are you a Java developer looking to add advanced hardware I/O capabilities to your Android or PC application? Well then the IOIO-OTG is for you! The... More
2 Unit(s)
Conductive Fabric - 12"x13" Ripstop

SKU: DEV-01338

$15.00
This is a conductive knit fabric for use in e-textiles. It is similar in feel to a nylon ripstop material. It is highly conductive with a surface... More
5 Unit(s)
Makey Makey - Retail

SKU: DEV-01339

$68.50
You may be the greatest living banana-pianist, but how will you ever know if you don't make yourself a banana piano? Good news, that project and countless... More
3 Unit(s)
Data Logging shield for Arduino

SKU: DEV-01340

$32.00
Here's a handy Arduino shield: we've had a lot of people looking for a dedicated and well-designed data logging shield. Not only is it easy to assemble... More
5 Unit(s)
RaspiRobot Board

SKU: DEV-01345

$39.00
The Raspberry Pi packs plenty of processing power in a small and inexpensive package and  that  makes it perfect for robot brains! The only... More
5 Unit(s)
easyRadio Connect2Pi USB Dongle

SKU: WIR-01347

$96.00
Lead-time: 2~7 working days. Utilising proprietary LPRS easyRadio technology operating in the 434MHz Industrial Scientific & Medical (ISM)... More
8 Unit(s)
easyRadio Arduino Shield

SKU: WIR-01348

$96.00
Lead-time: 2~7 working days. This ‘shield’ allows Arduino boards to communicate wirelessly using proprietary LPRS easyRadio technology... More
6 Unit(s)
Arduino Relay Shield v2.1

SKU: DEV-01355

$27.50
The Arduino Relay Shield provides an easy way for smart appliance control. It covers control to normal load circuits with 4 photo-coupled solid... More
5 Unit(s)
I/O Expansion Shield for Arduino Mega

SKU: DEV-01356

$26.50
This is version 2.3 of the Mega IO Expansion shield. This shield is extra large and includes 3 Xbee slots, 1 microSD slot, Arduino shield headers to plugin... More
3 Unit(s)
LilyPad LED White (5pcs)

SKU: DEV-01372

$7.00
A simple, very bright, 250mcd, white LED LilyPad. Light up the night! LilyPad is a wearable e-textile technology developed by Leah Buechley and... More
10 Unit(s)
LilyPad LiPower

SKU: DEV-01373

$19.50
Sparkfun Electronics
A small, but very mighty power supply. This board was designed to be as small and inconspicuous as possible. The nice thing about LiPower is the ability to... More
1 Unit(s)
4GB SD card for Raspberry Pi preinstalled with Raspbian Wheezy

SKU: DEV-01376

$19.50
This is a 4GB microSDHC card (SDC44GB) that comes with a SD adapter and is pre-programmed to contain the latest Raspberry Pi Linux distribution "Raspbian... More
ProtoSnap - LilyPad Development Board Retail

SKU: DEV-01381

$78.50
This is the same product as the  ProtoSnap LilyPad Development Board . The difference is this version comes in fancy clamshell packaging. The... More
3 Unit(s)
Dual VNH5019 Motor Driver Shield for Arduino

SKU: DEV-01383

$66.50
This motor driver shield and its corresponding Arduino library make it easy to control two bidirectional, high-power, brushed DC motors with an ... More
1 Unit(s)
Arduino Uno - R3

SKU: DEV-01080

$32.70
This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno... More
65 Unit(s)
Arduino Mega 2560 R3

SKU: DEV-01112

$59.95
Arduino
Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing /... More
48 Unit(s)
Arduino Uno R3 with USB Cable

SKU: DEV-01158

$36.00
This is the new Arduino Uno R3 . In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the... More
63 Unit(s)
sgBotic Budget Pack for Arduino

SKU: DEV-01159

$59.50
Interested in making neat stuff with an Arduino but not sure where to start? This budget pack includes the latest Arduino Uno R3, breadboard, jumper wires... More
11 Unit(s)
Arduino Starter Kit - Flex

SKU: DEV-01216

$79.20
Sparkfun Electronics
The Arduino Starter Kit is a great gift for beginners and weathered professionals alike.  This version comes with the new Arduino Uno.... More
Sparkfun Inventor's Kit for Arduino

SKU: DEV-01257

$125.00
Sparkfun Electronics
Note: This kit includes the new Arduino Uno R3 (SMD or DIP version) , but the documentation is not yet updated to reflect this. Nothing should change,... More
2 Unit(s)
SparkFun Inventor's Kit for Arduino with Retail Case

SKU: DEV-01310

$135.00
This is the 'retail' version of the SparkFun Inventor's Kit (SIK). This version comes with the carrying case seen in the pictures, where the standard... More
Bluetooth Mate Gold

SKU: WIR-00585

$84.50
Sparkfun Electronics
The Bluetooth Mate is very similar to our BlueSMiRF modem, but it is designed specifically to be used with our Arduino Pros and LilyPad... More
2 Unit(s)
FTDI Basic Breakout - 3.3V

SKU: DEV-00765

$19.70
This is the newest revision of the  FTDI Basic , now with  a SMD 6-pin header on the bottom, which makes it smaller and more compact.... More
12 Unit(s)
OpenLog

SKU: DEV-00598

$33.00
Sparkfun Electronics
OpenLog is an open source data logger. Simple to use, simple to change. We wanted to create a serial logger that just worked. Power this device up and it... More
6 Unit(s)

Categories

 

Information

 

My account

Track my order(s):